FortiGate 70G PoE in Dubai, UAE
Built for organizations that want branch security, WAN control, VPN services, and access-layer power in a compact appliance, this Fortinet firewall combines hardware-accelerated networking with four PoE/PoE+ interfaces. It is especially relevant when a site needs to protect internet traffic while directly powering selected access points, IP phones, cameras, or other compatible PoE devices without adding separate injectors. FourTeck.com helps business buyers review security subscriptions, port use, PoE requirements, deployment fit, and the supporting accessories needed for a clean rollout.
Request QuoteCheck UAE Availability
Quick Product Information
Fortinet
FG-70G-POE
Next-generation firewall with PoE
Compact fanless desktop appliance
Branch security, SD-WAN, VPN, PoE edge connectivity
4 PoE/PoE+ ports, 60 W shared budget
Selected FortiGuard and FortiCare options are configuration dependent
Contact FourTeck.com for current options
Based on selected hardware and support entitlement
Confirm bandwidth, security profile, PoE load, and subscription term
Buyer Snapshot: Is This the Right Branch Firewall?
This model is best considered when a business wants one compact security appliance to control internet access, establish secure site connectivity, run Fortinet secure SD-WAN, and power a small set of edge devices. It can reduce equipment count in compact branches, but the correct buying decision depends on inspection requirements, active subscription services, actual internet bandwidth, VPN demand, and the total PoE draw of connected equipment.
Branch offices, retail, clinics, education sites, professional offices, and smaller distributed locations.
Security and WAN control are combined with four powered Ethernet ports in a quiet desktop format.
Internet speed, inspection features, VPN use, required licenses, and total PoE wattage.
Configuration review, subscription guidance, compatible network planning, delivery coordination, and quote preparation.
Product Overview
A modern branch firewall has to do more than permit or block traffic. It often becomes the enforcement point for internet access, encrypted VPN connectivity, application control, segmentation, software-defined WAN decisions, and security inspection. In a small branch, the same site may also need wireless access points, phones, cameras, or other Ethernet-powered devices. The FortiGate 70G PoE addresses that combined requirement by pairing Fortinet’s G-series security architecture with integrated PoE/PoE+ ports in a compact desktop chassis.
Fortinet positions the 70G family as a converged next-generation firewall and secure SD-WAN platform for distributed enterprise sites. The appliance runs FortiOS, which brings firewalling, SD-WAN, VPN, segmentation, management, and security-service integration into the same operating environment. This matters to IT teams that want consistent branch policies rather than a collection of unrelated boxes with different management workflows. Fortinet’s Security Fabric integration can also connect the firewall with other Fortinet technologies where those products and services form part of the wider network design.
The PoE variant changes the branch design discussion because four of its Gigabit Ethernet interfaces can provide PoE/PoE+ power from a shared 60 W budget. That can be useful for a smaller site where only a few powered devices are required and a dedicated PoE switch would add cost, cabling, power adapters, rack space, or management overhead. It is important, however, to calculate the real power draw. Four devices do not automatically fit simply because four powered ports exist; the combined requirement must remain within the available budget, and each endpoint must be compatible with the supported power standard.
For UAE buyers, the practical selection process should combine performance and procurement planning. Published firewall throughput is only one reference point. Security inspection, VPN use, enabled protection services, user behavior, application mix, and future growth all affect the right sizing decision. FourTeck.com can help translate those requirements into a quotation that covers the correct appliance, support entitlement, security bundle, and related network components rather than treating the firewall as a standalone box.
Key Business Benefits
◆ Fewer Branch Devices
Integrating firewall functions, secure SD-WAN, VPN services, and four powered Ethernet ports can simplify smaller branch designs. Where the PoE budget fits the endpoint requirement, businesses may avoid separate injectors or an additional small PoE switch, reducing equipment count and simplifying troubleshooting.
◆ Security with Network Control
FortiOS combines routing and security policy in one operating environment. This supports a branch architecture in which WAN path decisions, segmentation, firewall rules, VPNs, and subscribed threat-protection functions can be planned together rather than configured as isolated systems.
◆ Hardware-Accelerated Performance
The 70G platform uses Fortinet’s SOC5/SP5 architecture with dedicated acceleration components. For buyers, the practical advantage is a purpose-built security appliance designed to handle forwarding and inspection workloads without relying only on a general-purpose desktop processor.
◆ Practical PoE for Edge Devices
A shared 60 W PoE budget allows selected access points, phones, cameras, and compatible edge equipment to be powered from the firewall. This is valuable when a site needs only a handful of powered devices and wants to keep cabling and electrical arrangements straightforward.
◆ Quiet Desktop Deployment
The fanless desktop design is suitable for environments where the firewall may sit in an office communications area rather than a dedicated server room. Buyers should still provide appropriate ventilation, power protection, and secure physical placement.
◆ Easier Standardization Across Sites
Organizations rolling out multiple smaller locations can use a consistent FortiOS-based approach for policy, VPN, SD-WAN, and monitoring. Standardization can make documentation, support procedures, change control, and future branch deployment easier for internal IT teams and managed service providers.
These benefits depend on correct sizing and licensing. The hardware does not automatically include every FortiGuard security service, and a 60 W PoE budget must be checked against real endpoint requirements. A good procurement process therefore considers appliance performance, subscription level, renewal term, deployment topology, and powered-device demand together.
Product Highlights
- Ten Gigabit Ethernet RJ45 interfaces: the platform provides ten 10/100/1000BASE-T front-panel interfaces, including WAN connectivity, FortiLink-designated ports, standard Ethernet interfaces, and four PoE/PoE+ interfaces on the PoE model.
- Four powered network ports: the PoE interfaces share a total available power budget of 60 W, allowing a compact site to power compatible network endpoints directly.
- Published firewall performance up to 10 Gbps: Fortinet’s published figures show 10/10/10 Gbps firewall throughput under its defined packet-size testing methodology.
- Security inspection figures for sizing: published values include 2.5 Gbps IPS throughput, 1.5 Gbps NGFW throughput, 1.3 Gbps threat-protection throughput, and 1.4 Gbps SSL inspection throughput under vendor test conditions.
- VPN capability: the platform is designed for site-to-site and client VPN use, with Fortinet publishing 7.1 Gbps IPsec VPN throughput using its stated test profile.
- Secure SD-WAN: FortiOS includes SD-WAN capabilities that can steer traffic across available WAN paths according to policy and application requirements.
- Security Fabric integration: the appliance can participate in Fortinet’s broader ecosystem when deployed with compatible Fortinet products and services.
- Compact, fanless form factor: the enclosure is designed for desktop deployment and quiet operation, useful for branch and office locations.
Technical Specifications
| Specification | Detail |
|---|---|
| Brand | Fortinet |
| Model / SKU | FG-70G-POE |
| Product Type | Next-generation firewall and secure SD-WAN appliance with PoE |
| Security Processor Architecture | SOC5 / SP5 platform with NP7Lite and CP10 components in the 70G architecture |
| Firewall Throughput | 10 / 10 / 10 Gbps for 1518 / 512 / 64-byte UDP packets under vendor test conditions |
| IPS Throughput | 2.5 Gbps |
| NGFW Throughput | 1.5 Gbps |
| Threat Protection Throughput | 1.3 Gbps |
| SSL Inspection Throughput | 1.4 Gbps under published vendor test profile |
| IPsec VPN Throughput | 7.1 Gbps using 512-byte packets under published vendor methodology |
| Concurrent TCP Sessions | 1.4 million |
| New TCP Sessions per Second | 100,000 |
| Network Interfaces | 10 × 10/100/1000BASE-T RJ45 front-panel interfaces |
| WAN Interfaces | 2 × GE RJ45 WAN |
| FortiLink-designated Interfaces | 2 × GE RJ45 FortiLink by default |
| PoE Interfaces | 4 × GE RJ45 PoE/PoE+ |
| Total PoE Budget | 60 W shared across powered ports |
| USB / Console | 1 × USB port; 1 × RJ45 console port |
| Onboard Storage | No 64 GB SSD on the 70G PoE variant; buyers needing onboard SSD logging should review the storage-equipped 71G PoE variant |
| Form Factor | Desktop, fanless |
| Dimensions | 40.5 × 216 × 160 mm |
| Weight | Approximately 0.973 kg |
| Power Consumption | Approximately 70.3 W average / 72.5 W maximum under published PoE model specifications |
| Operating Temperature | 0°C to 40°C |
| Operating System | FortiOS; supported firmware train and feature availability depend on the deployed release |
| Security Services / Support | Configuration dependent; FortiGuard and FortiCare options should be selected according to business requirements |
The specification table should be used as a sizing starting point, not as the entire purchasing decision. A branch with a 1 Gbps internet circuit may still need a different security model depending on how much SSL inspection, IPS, application control, VPN, and other protection is enabled. Similarly, the presence of four PoE ports does not guarantee that four particular endpoints fit the available power budget. Check the wattage requirement of every powered device and reserve margin where practical. Buyers should also decide whether local onboard storage is required for the planned logging workflow; if it is, compare the storage-equipped sibling model rather than assuming all 70/71G variants have the same storage configuration.
Configuration and Buyer Guidance
A firewall quote should start with the traffic and security requirement rather than the model name alone. First, document the active internet links, their upload and download speeds, and whether the site uses a single circuit or multiple WAN services for resilience. Next, list the protections that will be enabled. Basic stateful firewall traffic has a different processing profile from sessions that also use intrusion prevention, application control, malware inspection, web filtering, DNS security, or encrypted-traffic inspection.
Share internet speed, expected peak utilization, important applications, and whether large cloud backups or media traffic are common.
Define the inspection services the business expects to run and the security subscription level required to support them.
Identify site-to-site tunnels, remote-access users, authentication requirements, and peak simultaneous VPN usage.
List every endpoint intended for the powered ports and its maximum wattage. Ensure the combined design stays within the 60 W budget.
Confirm VLAN design, switching, wireless, ISP handoff, IP addressing, cabling, and whether FortiLink management will be used.
Select an appropriate support and security-service term, understand renewals, and align the purchase with internal maintenance policy.
Before requesting a quotation from FourTeck.com, provide the required appliance quantity, target deployment date, business location, preferred subscription term, current firewall model if this is a replacement, internet bandwidth, number of VPN users, number and type of PoE endpoints, and any need for switching, access points, racks, UPS protection, or migration support. This information makes it easier to recommend a complete configuration and reduces the risk of missing licenses or accessories after the hardware arrives.
Ideal Business Use Cases
Branch Office Edge
A branch that needs secure internet access, corporate VPN, application policies, and a small number of powered endpoints can consolidate these functions in a compact appliance. It is particularly useful where the branch has limited rack space and a simple network layout.
Retail and Customer-Facing Sites
Retail locations can segment business systems, guest services, point-of-sale traffic, and management networks while using the powered interfaces for selected cameras, phones, or wireless devices. Exact segmentation and compliance requirements should be reviewed before deployment.
Professional Offices
Law firms, consultancies, accounting offices, small corporate departments, and similar workplaces can use the firewall as a secure internet gateway while supporting remote-access VPN and controlled connectivity to centralized systems or cloud services.
Clinics and Care Locations
Smaller healthcare locations often need network separation between administrative, guest, device, and operational traffic. The platform can support segmented policies and secure WAN connectivity, provided the design follows the organization’s security and compliance requirements.
Education and Training Sites
Training centers and smaller education locations may use secure access policies, application control, VPN links, and powered access points as part of a compact branch design. User volume and wireless density must be sized separately from the firewall’s port count.
Multi-Site Standardization
Companies operating many similar branches can standardize on a repeatable firewall, VPN, and SD-WAN architecture. Consistent templates and centrally managed policies can reduce variation between sites, although each location should still be checked for bandwidth and PoE demand.
The most important consideration across all these scenarios is that use-case fit is not determined by a single throughput figure. A retail site with only a few users may generate demanding encrypted traffic, while a professional office with more users may have light application loads. For that reason, sizing should include current peak traffic, expected growth, inspection policy, tunnel use, and the criticality of the branch. Where local logging, more interface options, higher security throughput, or greater expansion is required, buyers should compare adjacent Fortinet models before finalizing the bill of materials.
FortiGate 70G PoE Hardware-Accelerated Security Performance
The 70G platform is built around Fortinet’s SOC5 architecture, commonly referred to as SP5, with dedicated networking and content-processing components. In practical terms, the appliance is designed so that common forwarding and security tasks can be accelerated in hardware rather than being handled entirely by a conventional CPU. Fortinet documents the 70G architecture with an integrated switch fabric that connects the front-panel interfaces to the NP7Lite processor, while CP10 provides content-processing functions within the platform.
For buyers, hardware acceleration is valuable because a branch firewall must often make security decisions while maintaining responsive application performance. The published performance figures are strong for the appliance class, including 10 Gbps firewall throughput, 2.5 Gbps IPS throughput, 1.5 Gbps NGFW throughput, and 1.3 Gbps threat-protection throughput. Those values should be interpreted using Fortinet’s stated testing methodology. They are not a promise that every deployment will deliver the same application speed, particularly when policies, encrypted traffic, packet sizes, logging, VPNs, and multiple security services are active at once.
A useful sizing approach is to compare the expected internet speed with the inspection profile rather than with raw firewall throughput alone. If a business intends to enable comprehensive protection across most outbound traffic, size against the relevant inspected-traffic figures and leave capacity for bursts, future users, additional applications, and policy growth. FourTeck.com can help buyers frame these requirements before quotation so the selected firewall is aligned with the real workload rather than simply chosen from the largest published number.
FortiGate 70G PoE Integrated Power for Branch Devices
Integrated PoE is the defining hardware difference for this variant. Four Gigabit Ethernet ports can provide PoE/PoE+ power, with a total available budget of 60 W shared across the powered interfaces. This allows the firewall to become both the security gateway and a limited power source for compatible edge devices. In compact installations, that can remove the need for several individual power adapters and can sometimes remove the need for a separate small PoE switch.
The design still requires a proper power calculation. A four-port count should never be interpreted as permission to connect any four powered devices. Access points, cameras, phones, sensors, and other endpoints can have very different maximum draw, especially during startup or when optional radios, heaters, infrared illumination, or USB accessories are active. Add the maximum expected draw of all planned endpoints, check their PoE class and standard, and ensure the total remains within the firewall’s shared budget. Where the required power is higher, a managed FortiSwitch or another suitable PoE switch may be the cleaner solution.
Integrated PoE is particularly attractive for small branches that need one or two access points plus a few additional endpoints, or for a standardized site design where every location uses the same limited set of devices. It also simplifies cable tracing because data and power share the Ethernet run. Buyers should nevertheless plan for UPS capacity, power-adapter requirements, cable quality, endpoint placement, and what happens to the powered devices during firewall maintenance. FourTeck.com can help review the device list and determine whether integrated PoE is sufficient or whether separate switching should be included in the project.
FortiGate 70G PoE Secure SD-WAN, VPN and Branch Management
A distributed business often needs more than perimeter filtering. Branch traffic may have to reach cloud applications directly, connect to a headquarters or data center through encrypted tunnels, and use a secondary WAN path when the primary circuit is impaired. FortiOS brings these network and security functions together, allowing SD-WAN path selection, VPN configuration, firewall policy, and security inspection to be planned within the same platform.
Secure SD-WAN can be used to steer applications according to business policy and measured link conditions when more than one WAN connection is available. The value is not simply failover. A well-designed policy can keep important traffic on preferred links, direct selected services toward alternate paths, and support standardized branch connectivity. The exact benefit depends on the available circuits, routing architecture, application requirements, and operational model, so SD-WAN should be treated as a design task rather than a checkbox.
VPN planning deserves the same care. Fortinet publishes 7.1 Gbps IPsec VPN throughput for this platform under its stated test profile, but the practical design should be based on the number of site-to-site tunnels, remote users, authentication method, encryption settings, and simultaneous traffic demand. Businesses with many branches should also consider how policies, firmware, configuration backups, logging, and changes will be managed across the estate. Where compatible Fortinet switching, wireless, or management products are used, FortiLink and Security Fabric capabilities can support a more integrated operational approach. FourTeck.com can help buyers identify whether the requirement is simply a branch firewall replacement or part of a wider secure networking project.
What Should You Know Before Choosing This Firewall?
The questions below reflect the practical information business buyers usually need before selecting a branch firewall. They focus on deployment fit, traffic sizing, powered devices, licensing, compatibility, and rollout planning so both technical and procurement teams can prepare a more accurate requirement.
Who is this firewall best suited for?
It fits smaller business and distributed branch environments that need secure internet access, VPN, SD-WAN, and a limited number of powered Ethernet endpoints. Suitability should be confirmed against inspection throughput rather than user count alone. A site with modest staff numbers can still create demanding encrypted traffic, while another with more users may generate a lighter workload.
Can four PoE devices always be powered at the same time?
Not automatically. The four PoE/PoE+ interfaces share a 60 W total power budget, so the maximum power requirement of every endpoint must be added together. An access point, camera, or phone may draw less or more than another device. Check the endpoint power standard, maximum wattage, cabling, and startup behavior before finalizing the design.
How should internet bandwidth be matched to this model?
Start with the security features that will actually be enabled. Raw firewall throughput is much higher than the published NGFW and threat-protection figures because advanced inspection requires more processing. Compare the expected peak traffic with the relevant inspection profile, then allow headroom for bursts, growth, VPN traffic, additional users, and future policy changes.
What should be checked when replacing an older firewall?
Document the current WAN links, VLANs, static routes, VPN tunnels, public services, NAT rules, authentication, certificates, security profiles, and connected devices. Do not assume a configuration can be moved without review. Migration is also a good time to remove obsolete rules, update addressing documentation, verify license requirements, and test failover procedures.
Will it work with an existing FortiSwitch or FortiAP deployment?
The platform includes FortiLink-designated interfaces and FortiOS integration for compatible Fortinet networking products. Buyers should still confirm the software versions, supported device models, intended management mode, required PoE power, and topology. Existing switch and access-point configurations may also require planning during a firewall replacement or branch redesign.
Which security subscription should a buyer choose?
The correct subscription depends on the protections and support level the organization requires. FortiCare and FortiGuard service bundles can cover different combinations of support, intrusion prevention, malware protection, application control, web or DNS filtering, and additional services. Compare the included features, term, renewal responsibility, and security policy before ordering.
Can it support remote workers and site-to-site VPNs?
Yes, the platform supports IPsec VPN and FortiOS remote-access capabilities, but the design must consider tunnel quantity, simultaneous remote users, authentication, encryption choices, and available WAN bandwidth. Published VPN throughput is a laboratory reference. Real performance depends on traffic patterns and what additional inspection or policy is applied to VPN sessions.
What installation details should be prepared before delivery?
Prepare the ISP handoff type, WAN addressing, VLAN plan, cable routes, power outlet, UPS capacity, physical placement, administrator access process, and endpoint list. If PoE ports will be used, include each device’s power requirement. Also decide whether configuration will be staged before installation or built onsite during the migration window.
What information helps FourTeck prepare a more accurate quote?
Share the exact quantity, existing firewall model, internet circuit speeds, required security services, preferred subscription term, VPN requirements, number and type of PoE devices, delivery location, and any switching or wireless equipment included in the project. Mention whether local SSD logging, rack mounting, migration, or centralized management is required so alternative models can be considered if necessary.
Business Requirements to Match Before You Buy
For a compact branch that needs fewer devices
This appliance is a suitable option when a site needs firewalling and WAN services plus only a small number of powered endpoints. Confirm that the 60 W shared PoE budget covers the complete endpoint list before deciding that a separate PoE switch is unnecessary.
For businesses standardizing branch security
Organizations deploying several similar sites can use a common FortiOS policy and SD-WAN approach. Standardization is most effective when the WAN circuits, inspection profile, VPN architecture, and support term are documented before rollout.
For buyers replacing an older generation appliance
A replacement project should compare security throughput, interface layout, firmware support, subscriptions, and migration complexity rather than only matching the old model number. Review every active rule and tunnel so legacy configuration does not become unnecessary technical debt.
For projects with access points, phones or cameras
Integrated PoE can simplify a small deployment, but endpoint power consumption and network segmentation must be checked together. If the project needs more powered ports or greater wattage, include a suitable managed PoE switch in the architecture.
For cloud-first businesses with encrypted traffic
Cloud applications increase the amount of encrypted traffic crossing the branch. Buyers should size against SSL inspection and threat-protection requirements when those controls are planned, not only against basic firewall forwarding figures.
For procurement teams comparing bundles
Hardware-only and bundled subscriptions can differ substantially in included services and renewal responsibilities. Compare the security-service package, support level, subscription term, and expected lifecycle cost before approving a purchase.
What Buyers Should Check Before Purchase
A well-prepared firewall purchase avoids two common problems: buying enough raw performance but not the right security entitlement, or selecting the correct appliance but missing a deployment dependency. Begin with the complete branch design. Confirm the WAN circuits, actual peak traffic, planned inspection services, VPN architecture, VLANs, internal networks, public-facing services, and the devices that will connect directly to the appliance.
Configuration Fit
Compare the expected traffic load with IPS, NGFW, SSL inspection, and threat-protection performance, not just raw forwarding. Leave sensible headroom for growth and policy changes.
Compatibility Check
Validate ISP handoffs, cabling, VLANs, FortiSwitch and FortiAP support, authentication, management tools, certificates, and any third-party systems that must integrate with the firewall.
Availability and Warranty
Ask for the exact hardware and service bundle being quoted, current lead-time guidance, applicable support entitlement, and warranty handling process. Do not assume all packages include the same services.
Long-Term Cost
Include security renewals, support renewals, management requirements, migration effort, replacement planning, and any separate switching or UPS equipment in the lifecycle budget.
The PoE requirement deserves a separate checklist. Record the maximum wattage of every powered device and confirm the aggregate stays inside the shared budget. If the design needs additional APs, more cameras, higher-power devices, or future expansion, it may be more practical to purchase a managed PoE switch and use the firewall primarily for routing and security. Likewise, if local onboard logging is important, compare the storage-equipped sibling model before ordering.
Finally, prepare the migration plan. Decide whether the configuration will be created from scratch or converted from an existing firewall, how internet downtime will be controlled, how VPN peers will be updated, and how the team will test DNS, web access, business applications, remote users, segmentation, and failover after cutover. FourTeck.com can use these details to help prepare a more complete quotation and recommend related components where the initial model does not fully match the project.
UAE Availability and Service Support
FourTeck.com supports business technology inquiries across the UAE with assistance for product selection, configuration review, quotation preparation, delivery coordination, and warranty guidance. Availability can vary according to the exact appliance SKU, security-service bundle, support term, order quantity, and supplier status, so buyers should request current commercial information rather than relying on a generic hardware listing.
For this firewall category, a useful quote request should identify whether the organization needs hardware only or a complete package with FortiCare and FortiGuard services. Security subscriptions can change the practical capability and lifecycle cost of the solution, and renewal planning should be considered at the original purchase stage. FourTeck.com can also help buyers review whether the integrated PoE ports are sufficient or whether a FortiSwitch, access points, UPS, rack accessory, additional cabling, or migration support should be included.
Deployment timing should be planned around the business cutover requirement. If the firewall is replacing an existing gateway, share the current model, WAN details, VPN requirements, and proposed migration date. If it is being deployed at a new branch, provide the ISP handoff, internal VLAN plan, expected user and device profile, and the equipment that will draw power from PoE. This allows the quotation to reflect the real project rather than only the appliance SKU.
Dubai, Abu Dhabi, Sharjah and Ajman Coverage
Businesses in Dubai, Abu Dhabi, Sharjah, Ajman, and other UAE locations can contact FourTeck.com for firewall quotation support, configuration guidance, security-bundle selection, and delivery coordination. For project purchases, provide the required quantity, final delivery location, deployment schedule, current network details, and whether installation or migration assistance is needed. The team can also help compare related Fortinet options when the requirement calls for onboard storage, more interfaces, a different performance tier, or additional PoE capacity. Availability and delivery arrangements remain dependent on the selected SKU, supplier status, commercial terms, and order quantity.
Regional Availability Across GCC and Africa Markets
FourTeck.com also supports business technology inquiries across selected GCC and Africa markets through its regional inquiry channels. Organizations in Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Kenya, Uganda, and other supported locations can request product and configuration guidance for branch firewall projects. Availability, shipping arrangements, warranty handling, licensing, tax treatment, and support options can differ by country, so each requirement should be quoted according to the destination and the exact hardware or subscription bundle.
Regional projects benefit from standardization. If a company plans to deploy the same branch design in multiple countries, share the complete bill of materials and indicate which elements must remain consistent across all sites. FourTeck can help review the firewall model, subscription term, switching, wireless, PoE endpoints, and management approach so procurement teams can compare like-for-like configurations. Country-specific availability or lead times should be confirmed before a rollout schedule is finalized.
For regional inquiries, buyers can use FourTeck.com, FourTeck Kuwait, FourTeck Kenya, FourTeck Uganda, and FourTeck Africa as appropriate to the destination. A single coordinated request should include site count, quantities, delivery countries, preferred service term, and rollout window.
Other Fortinet Options Buyers May Consider
The correct model depends on whether the project prioritizes integrated PoE, local storage, additional performance, or a smaller entry configuration. The options below can help procurement teams frame the discussion before asking for a quote. Final suitability should be confirmed against current vendor specifications and the required security-services package.
FortiGate 70G
Suitable when the same 70G family performance is desired but integrated PoE is not required.
FortiGate 71G PoE
Consider this sibling model when integrated PoE is required together with onboard SSD storage for local logging use cases.
FortiGate 90G
A higher-tier option to review when the site needs a different performance or interface profile.
FortiGate 50G
An entry-class Fortinet option worth comparing for smaller branch requirements where the 70G family may provide more capacity than necessary.
A related model should not be chosen purely from the model number. Compare inspected-traffic performance, interface layout, PoE needs, storage requirements, management architecture, support entitlement, and expected service life. FourTeck.com can help turn those factors into a short list before commercial approval.
Why Business Buyers Contact FourTeck.com
Firewall procurement is rarely just a hardware transaction. The appliance has to fit the traffic profile, security policy, existing network, subscription model, migration plan, and operational support process. FourTeck.com helps business buyers organize those requirements before quotation so purchasing teams can compare complete configurations rather than incomplete hardware listings.
Review bandwidth, inspection, VPN, interfaces, PoE, and related network requirements.
Prepare a hardware and service request with the correct term, quantity, and project details.
Consider the firewall within the wider switching, wireless, UPS, cabling, and rollout requirement.
Clarify the support entitlement and warranty handling associated with the selected commercial package.
Compare newer and alternative models when replacing an older appliance or revising branch design.
Support multi-unit requirements with a consistent bill of materials and delivery information.
The goal is to reduce avoidable purchasing errors: under-sizing inspection performance, forgetting a required security subscription, overlooking the PoE power budget, omitting a switch or UPS, or selecting a non-storage model when local logging was expected. By sharing technical and commercial requirements together, buyers can receive a quotation that is easier for IT, procurement, and finance teams to evaluate.
Frequently Asked Questions
What is the main purpose of this appliance?
It is a next-generation firewall and secure SD-WAN appliance for branch and smaller business environments. It can enforce firewall and security policies, provide VPN connectivity, route traffic, support SD-WAN, and integrate with Fortinet’s wider ecosystem. The PoE version also provides four powered Ethernet interfaces for compatible devices, subject to the shared power budget.
Does the hardware include every FortiGuard security service?
No. Security services and FortiCare support depend on the bundle or subscription purchased with the appliance. Buyers should compare the required protections, support level, contract term, and renewal plan before ordering. A hardware-only SKU should not be assumed to include all threat-protection, web-filtering, malware, or support services.
Does this model include built-in Wi-Fi?
No. This is the FortiGate wired model, not a FortiWiFi appliance. Wireless access can be provided through compatible external access points as part of the network design. If integrated wireless is a project requirement, buyers should compare the appropriate FortiWiFi variant and confirm regional wireless specifications before purchase.
Does the 70G PoE model have onboard SSD storage?
The 70G PoE variant is the non-storage PoE model. The 71G PoE sibling adds onboard SSD storage. If the project requires local log retention on the appliance, discuss the logging design and compare the storage-equipped version rather than assuming the two models are identical apart from their name.
What does the 60 W PoE budget mean?
It means the four PoE/PoE+ ports share a combined available power budget of 60 watts. The total maximum draw of the connected powered devices must fit within that shared amount. Check each endpoint’s PoE standard and wattage before deployment, and consider a dedicated PoE switch if the branch needs more powered devices or higher total power.
Can the firewall be used for site-to-site IPsec VPN?
Yes. FortiOS supports IPsec VPN, and Fortinet publishes IPsec throughput figures for the platform. Practical sizing should still account for the number of tunnels, encryption settings, concurrent traffic, WAN bandwidth, and any security inspection applied to VPN sessions. Multi-site designs should also consider how configuration and monitoring will be managed centrally.
Can this appliance participate in Fortinet Security Fabric?
Yes. Fortinet positions FortiGate as a core component of its Security Fabric platform. When used with compatible Fortinet switching, wireless, management, endpoint, or security products, the firewall can participate in a broader integrated architecture. Exact functionality depends on the connected products, software releases, subscriptions, and intended management design.
Can FourTeck support bulk or multi-site quotations?
Business buyers can request quotations for multiple appliances or standardized branch deployments. Share the site count, required quantity, hardware and subscription preference, rollout schedule, delivery locations, and any related switching or wireless requirement. Availability and commercial terms depend on the exact configuration and supplier status, so project quantities should be confirmed during quotation.
How can I request current availability and pricing?
Use the FourTeck.com contact page and include the exact model, quantity, preferred subscription term, required security services, and delivery location. If the firewall is part of a new branch or replacement project, also include internet bandwidth, PoE devices, VPN requirements, and the current firewall model so the sales team can prepare a more relevant quotation.
Need Help Choosing the Right Fortinet Firewall?
FourTeck.com can help you review firewall performance, security subscriptions, VPN requirements, PoE load, related switching or wireless equipment, warranty guidance, and delivery requirements before you place an order. Share your branch design and procurement timeline so the quotation reflects the complete business requirement.
