FortiGate 901G-DC in Dubai, UAE
Designed for high-capacity security edges, data rooms, telecom-style racks and enterprise networks that operate on 48–60V DC infrastructure, this Fortinet appliance combines accelerated security processing, multi-gigabit connectivity, local SSD storage and redundant DC power in a compact 1RU chassis. It is a strong candidate for organizations that need to protect high-volume internet traffic, aggregate secure branch connectivity, inspect encrypted sessions, segment critical networks and maintain consistent policy through FortiOS. FourTeck.com helps buyers translate technical requirements into the correct hardware, subscription, optics, deployment and support scope before purchase.
Request QuoteAsk for Configuration Support
Quick Product Information
Fortinet
FG-901G-DC
Next-generation firewall appliance
1RU rack mount
Dual 48–60V DC, hot-swappable
2 x 480GB SSD
Enterprise edge, data center, secure WAN and segmentation
Contact FourTeck.com for current UAE options
FortiGuard options vary by selected bundle
Based on selected FortiCare and supply terms
Optics, cables and deployment items based on design
Share bandwidth, inspection, HA, DC power and license needs
Fast Decision Snapshot for Enterprise Buyers
A firewall of this class should be selected against inspected traffic, encrypted-session load, WAN architecture and resilience requirements rather than raw internet speed alone. The cards below summarize the main decision points procurement and IT teams should agree before requesting a commercial proposal.
Large enterprise perimeters, data-center security zones, regional WAN hubs and environments with DC power distribution.
Combines high-speed security inspection, routing, VPN and SD-WAN functions in one FortiOS-based security platform.
Confirm traffic mix, SSL inspection, VPN scale, required FortiGuard services, optics, HA design and available rack power.
The DC model is intended for restricted-access installations with correctly engineered DC cabling and power infrastructure.
The 901G variant includes two 480GB SSDs, useful when local logging or storage-assisted operational requirements are part of the design.
FourTeck.com can help align hardware, security subscriptions, support term, sourcing, delivery and configuration requirements.
Product Overview
The FortiGate 901G-DC is a high-capacity security gateway for organizations that need more than a conventional perimeter firewall. It sits in the part of a network where internet access, data-center traffic, branch tunnels, application flows and security controls can converge, so the platform must process large volumes of traffic while still enforcing inspection policies. Fortinet combines networking and security functions through FortiOS, allowing the appliance to act as a firewall, secure SD-WAN edge, VPN termination point, segmentation gateway and policy-enforcement platform within a broader Security Fabric design.
Its physical design matters as much as its software capabilities. This is a 1RU rack appliance with dual hot-swappable DC power supplies designed for 48–60V DC environments. That makes it especially relevant where the network or data-center rack already uses centralized DC distribution, including telecom-style facilities, carrier rooms, resilient network sites and certain enterprise infrastructure environments. Fortinet’s quick-start guidance specifies that DC models are intended for restricted-access locations and requires appropriate in-rack cabling practices. Buyers should therefore treat power engineering, cable gauge, rack access and maintenance procedure as part of the purchasing decision rather than an installation detail to solve later.
Connectivity is another defining strength. The platform provides four hardware-accelerated 25GE SFP28/10GE SFP+ ultra-low-latency slots, four hardware-accelerated 10GE SFP+/GE SFP slots, eight GE SFP slots and sixteen GE RJ45 interfaces, plus a dedicated GE management interface and a 2.5GE/GE HA port. This port mix can support high-speed upstream links, aggregation, security zones, management separation and legacy gigabit connectivity without forcing every link into one media type. Final optics and cabling should always be matched to the switch, router, ISP handoff or server-side connection.
For UAE buyers, the practical question is whether this capacity matches the intended inspected workload. FourTeck.com can review WAN bandwidth, security profiles, encrypted traffic, VPN tunnels, branch count, network segmentation, expected growth, local logging, FortiManager or FortiAnalyzer requirements, and high-availability design before quotation. That helps procurement teams evaluate the complete project scope instead of treating the appliance code as the entire solution.
Key Business Benefits
◆ High Inspection Headroom
Large organizations rarely run a firewall with only basic packet filtering. IPS, application control, malware protection and encrypted-traffic inspection consume resources. A platform in this class gives security teams room to apply richer controls while planning for busy periods, new cloud applications and growth in encrypted sessions. Sizing should still use protected throughput requirements rather than headline firewall figures.
◆ Secure WAN Consolidation
FortiOS can combine firewall enforcement with secure SD-WAN and VPN functions, helping multi-site organizations reduce operational fragmentation. Instead of managing a separate routing appliance, VPN concentrator and firewall policy stack at the same edge, teams can design branch connectivity and security policy together. This is especially useful for regional networks where application path selection and threat controls must remain coordinated.
◆ Flexible High-Speed Interfaces
The mix of 25GE, 10GE, fiber gigabit and copper gigabit ports gives architects freedom to connect upstream routers, core switches, server zones and management networks using suitable media. That flexibility helps avoid unnecessary media converters and can support phased migrations where older gigabit systems remain in service while newer high-speed links are introduced.
◆ Resilient DC Power Design
Dual hot-swappable DC power supplies align with facilities that use resilient DC distribution. This can simplify integration into telecom or data-center power designs where -48V-style infrastructure is already standard. The advantage only becomes meaningful when upstream feeds, breakers, cabling and operational procedures are engineered correctly, so power-path planning should be part of the pre-sales review.
◆ Local SSD Capacity
Two onboard 480GB SSDs distinguish the 901G variant from the storage-free 900G model. Local storage can support logging-related requirements and provide additional operational flexibility, although enterprises should still decide whether centralized logging, reporting and retention through platforms such as FortiAnalyzer form part of the architecture.
◆ Segmentation and Access Control
Enterprises increasingly need to control movement between users, servers, guest networks, OT zones, cloud services and partner connections. A high-capacity firewall can be positioned between security zones to apply policy, inspect traffic and limit lateral movement. This supports a more structured network than a flat architecture where compromise in one segment can spread too easily.
◆ Centralized Operational Model
FortiOS provides a common operating environment for routing, policy, VPN, SD-WAN and security services. For teams already using Fortinet technologies, this can simplify change control, training and policy consistency. Larger deployments can also consider centralized management and analytics tools as part of the complete design rather than managing every device independently.
Product Highlights
Fortinet’s NP7 network processor and CP9 content processor provide hardware acceleration for demanding security and networking workloads.
Current vendor datasheet values for the 900G Series list up to 42Gbps IPS, 31Gbps NGFW and 30Gbps threat-protection throughput under defined enterprise traffic mixes.
Published values include up to 164/163/153Gbps IPv4 firewall throughput by packet size and up to 55Gbps IPsec VPN throughput.
The series is specified for up to 16 million concurrent TCP sessions and 720,000 new TCP sessions per second, supporting busy enterprise traffic patterns.
Four 25GE SFP28 ULL slots, four 10GE SFP+ slots, eight GE SFP slots and sixteen GE RJ45 ports support varied network designs.
The storage variant includes 2 x 480GB SSD and a Trusted Platform Module, adding local storage and hardware-backed cryptographic capabilities.
Performance figures are vendor test results and should not be interpreted as guaranteed production throughput. Real results depend on FortiOS version, security profiles, traffic mix, packet size, SSL inspection, logging, VPN encryption, application behavior and other enabled features. Buyers should size against the expected protected workload and maintain capacity headroom for growth and policy changes.
Technical Specifications
| Specification | Published Detail | Buyer Note |
|---|---|---|
| Brand / Model | Fortinet FG-901G-DC | DC-powered 901G storage variant |
| Product Type | Next-generation firewall | Enterprise edge, segmentation, VPN and secure WAN use |
| Firewall Throughput | Up to 164 / 163 / 153Gbps IPv4, 1518 / 512 / 64-byte UDP | Use inspected throughput for real sizing |
| IPS Throughput | Up to 42Gbps, enterprise traffic mix | Vendor test methodology applies |
| NGFW Throughput | Up to 31Gbps, enterprise traffic mix | Application control and IPS conditions apply |
| Threat Protection | Up to 30Gbps, enterprise traffic mix | Security service selection affects production performance |
| IPsec VPN | Up to 55Gbps, 512-byte packets | Tunnel design, encryption and traffic mix matter |
| SSL-VPN Throughput | Up to 10Gbps | Confirm FortiOS feature and remote-access design |
| SSL Inspection | Up to 16.7Gbps, IPS average HTTPS test | Certificate strategy and application exceptions require planning |
| Concurrent TCP Sessions | Up to 16 million | Useful for high-connection enterprise environments |
| New TCP Sessions / Second | Up to 720,000 | Production behavior varies by inspection features |
| 25GE Interfaces | 4 x 25GE/10GE SFP28/SFP+ ULL slots | Choose compatible optics and link speeds |
| 10GE Interfaces | 4 x 10GE/GE SFP+/SFP slots | Suitable for uplinks and high-speed zones |
| 1GE Fiber | 8 x GE SFP slots | Useful for legacy or dedicated fiber segments |
| 1GE Copper | 16 x GE RJ45 ports | Supports LAN/WAN/security-zone connections |
| Management / HA | 1 x GE RJ45 management; 1 x 2.5GE/GE HA | Plan dedicated management and HA topology |
| Storage | 2 x 480GB onboard SSD | Centralized log retention may still be required |
| Security Processors | NP7 and CP9 hardware acceleration | Supports accelerated networking and content processing |
| Trusted Platform Module | Yes | Hardware-backed cryptographic key support |
| Power Input | 48–60V DC, maximum 7A at 48V | Restricted-access installation and proper DC cabling required |
| Power Supplies | Dual, redundant, hot-swappable DC PSU | Use independent feeds when design requires resiliency |
| Power Consumption | Approx. 144W average / 264W maximum | Use maximum values for facility planning |
| Dimensions | 44.45 x 432 x 380mm | 1RU rack mount; verify rail and rack depth planning |
| Weight | Approx. 7.5kg | Use proper rack installation practice |
| Operating Temperature | 0°C to 45°C | Maintain appropriate conditioned environment and airflow |
A buyer should not select this class of firewall by comparing only the 164Gbps headline firewall number. That figure describes packet-forwarding performance under specific conditions, while a production environment may enable IPS, application control, antivirus, web filtering, DNS security, SSL inspection, VPN encryption and detailed logging at the same time. The more useful sizing figure is therefore the throughput available with the intended security stack enabled, plus enough reserve capacity for traffic growth and busy periods. A 10Gbps or 20Gbps internet circuit does not automatically mean a smaller appliance will work, because east-west segmentation traffic, multiple WANs, site-to-site tunnels and private data-center flows can raise the actual protected load far above internet bandwidth.
Interface planning is equally important. The appliance can connect at 25GE, 10GE and 1GE speeds, but optics must match the peer device, fiber type, wavelength and distance. Procurement should list every required transceiver and cable instead of assuming modules are included for all intended links. The same applies to high availability: two firewalls require additional rack space, power feeds, HA links, duplicated optics and a cutover plan. When these items are defined before quotation, project cost and deployment risk become easier to control.
Configuration and Buyer Guidance
Enterprise firewall projects are usually won or lost during requirement gathering. Before placing an order, the technical team should document not just the current network but the way the network is expected to operate over the next three to five years. That document does not need to be complicated; it needs to answer the questions that affect appliance sizing, licensing and implementation.
List internet speed, internal segmentation flows, data-center traffic, cloud access and expected peak throughput. Separate raw routing traffic from traffic that needs full security profiles.
SSL inspection has different performance characteristics from basic firewalling. Identify applications that can be inspected and those requiring exclusions for technical or policy reasons.
Count site-to-site tunnels, remote users, cloud connections and expected encrypted throughput. Decide whether branches use IPsec, SD-WAN overlays or another design.
Service bundles can include different combinations of security and support. Choose according to required controls and renewal strategy, not simply the shortest product code.
Critical edges often use a pair. Budget for the second appliance, duplicate subscriptions where required, independent power feeds, matching optics and planned failover testing.
Confirm 48–60V DC feeds, protection devices, suitable cable size, safe cable routing, restricted-access conditions, airflow and available rack units before delivery.
For a more accurate FourTeck.com quotation, share the current firewall model, WAN bandwidth, expected protected throughput, number of sites, VPN requirements, desired subscription term, need for local or centralized logging, rack power type, high-availability requirement, interface speeds, required optics and delivery location. If the project is a migration, include a summary of current zones, VLANs, routes, NAT rules, VPN peers and major application dependencies. This information lets the sales and technical discussion focus on a configuration that fits the environment instead of guessing from user count alone.
Ideal Business Use Cases
Enterprise Internet Edge
Large headquarters and campus networks can use the appliance as an internet security gateway where multiple WAN links, large user populations, cloud applications and encrypted sessions converge. The design can combine application-aware policy, threat inspection, NAT, routing and secure remote connectivity while preserving capacity for traffic growth.
Data-Center Segmentation
Organizations can place a high-capacity firewall between application tiers, server zones, backup networks, management networks and partner segments. This reduces unnecessary lateral access and makes it easier to apply different inspection policies to business-critical systems, administrative traffic and external-facing services.
Regional SD-WAN Hub
A central site receiving traffic from many branches needs enough encrypted throughput, session capacity and interface flexibility to avoid becoming a bottleneck. FortiOS secure SD-WAN capabilities can help combine WAN path selection and security policy, while the appliance terminates branch connectivity at the regional hub.
Telecom and DC-Powered Facilities
The dual DC power design is relevant for network facilities that use centralized 48–60V DC distribution. In these environments, the firewall can integrate with existing resilient power architecture, provided the installation follows Fortinet’s restricted-access and DC cabling requirements.
High-Volume VPN Concentration
Enterprises with many site-to-site connections, cloud environments or remote connectivity needs can use the platform as part of a consolidated VPN architecture. Accurate sizing should consider encrypted throughput, concurrent sessions, authentication, tunnel count, routing and the effect of security inspection applied to tunnelled traffic.
Security Zone Consolidation
Organizations operating internet-facing services, corporate users, guest access, OT networks or contractor zones can use the platform to centralize policy between many trust boundaries. This approach can reduce uncontrolled pathways and provide a consistent place for access control, logging and inspection.
These use cases are not automatic recommendations. A data center with very high east-west traffic, a service provider with specialized routing requirements or a business with modest inspection needs may need a different architecture or model. The correct choice depends on the traffic that must cross the firewall, the services enabled, availability targets and the expected lifecycle of the deployment. FourTeck.com can help review this fit before a quote is finalized.
FortiGate 901G-DC High-Performance Security Processing
Security performance matters when a firewall has to inspect real application traffic rather than simply move packets between interfaces. Fortinet uses dedicated security processing hardware in this series, including NP7 and CP9 processors, to accelerate networking and content-security tasks. That architecture helps the appliance maintain high throughput while applying controls such as IPS, application visibility, VPN encryption and other FortiOS security functions. For buyers, the important result is not a chipset name; it is the ability to build a policy design that can remain practical as traffic volume and inspection depth increase.
Current Fortinet data for the series lists up to 42Gbps IPS throughput, 31Gbps NGFW throughput and 30Gbps threat-protection throughput under defined enterprise traffic mixes, alongside 164/163/153Gbps IPv4 firewall throughput for different packet sizes. These figures show why the device belongs in enterprise infrastructure, but they must be interpreted correctly. A production deployment may use SSL inspection, web filtering, application control, malware prevention, IPsec tunnels, logging and custom security profiles simultaneously. Each design has its own workload, so the target should be sustainable protected throughput with margin, not simply achieving the highest published number.
Security teams should also think about session behavior. Modern web applications open many short-lived encrypted connections, collaboration platforms create persistent flows, and branch networks can aggregate thousands of users and devices into the same edge. The published capacity of up to 16 million concurrent TCP sessions and 720,000 new TCP sessions per second provides substantial room for these patterns. Still, capacity planning should include expected connection spikes, NAT behavior and inspection settings. FourTeck.com can help buyers compare current network statistics with the appliance’s vendor specifications so that the selected platform has realistic operational headroom.
FortiGate 901G-DC Connectivity, Segmentation and Secure WAN
A firewall becomes easier to deploy when its physical interfaces match the architecture around it. This model provides a broad mix of port speeds instead of forcing every connection onto identical interfaces. Four hardware-accelerated 25GE SFP28/10GE SFP+ ultra-low-latency slots can serve high-speed core or aggregation links. Four additional 10GE SFP+/GE SFP slots provide another tier for data-center, WAN or switch uplinks. Eight GE SFP and sixteen GE RJ45 ports support lower-speed zones, dedicated links and legacy infrastructure, while the dedicated management and HA interfaces help keep operational traffic separate.
This flexibility is useful in segmentation projects. An enterprise may need distinct zones for public services, business applications, employee networks, management systems, backup platforms, guest access and operational technology. Rather than connecting everything through one flat switching environment, the architect can route selected traffic through the firewall so policies decide which zones communicate, on which services and with what inspection. The platform can also participate in VLAN-based designs where physical port counts are not the only segmentation mechanism.
For distributed businesses, connectivity is also about WAN intelligence. FortiOS secure SD-WAN functions can select paths based on application and link conditions while applying security through the same operating environment. A central device may terminate IPsec connectivity from branches, steer traffic to different WAN links and enforce policy for cloud-bound or data-center-bound applications. This can reduce the operational gap that appears when routing and security are managed by separate stacks.
Optics deserve special attention in procurement. An SFP, SFP+, or SFP28 slot does not guarantee that every third-party transceiver, wavelength or cable will behave as expected. Teams should identify peer device type, media, distance and desired speed for each high-speed link. FourTeck.com can help include suitable optics and cabling in the quote scope so the appliance does not arrive without the components required for installation.
FortiGate 901G-DC DC Power, Resilience and Operational Readiness
The DC suffix is not a cosmetic variant. Fortinet specifies dual 48–60V DC power supplies with a maximum current rating of 7A at 48V for the DC models. The supplies are redundant and hot-swappable, which supports resilient designs when they are connected to properly engineered upstream feeds. Facilities using telecom-style power, battery-backed DC distribution or controlled data-center DC systems may prefer this approach because it integrates with established power architecture instead of adding AC conversion at the device.
Installation requirements must be taken seriously. Fortinet’s quick-start guidance states that the DC units are intended for restricted-access locations, that DC power cables are for in-rack wiring, and that cables must be routed to avoid sharp edges and strain. The guide also specifies a minimum 12 AWG cable size and secure fastening of terminal rings to the PSU terminals. These details affect installation scope, safety review and handover documentation, so the facilities or data-center team should be involved before the firewall arrives.
Resilience should extend beyond the power supplies. A critical perimeter may use two firewalls in high availability, dual upstream routers, redundant core switches and independent DC feeds. If only one upstream path exists, a redundant firewall pair cannot remove that dependency. Likewise, a hot-swappable PSU provides little value if both feeds originate from one unprotected source. The procurement discussion should therefore map the entire failure chain: device, power, cabling, upstream network, internet circuits and operational support.
Thermal planning is also part of readiness. The appliance is specified for a 0°C to 45°C operating range and uses forced airflow. Rack teams should preserve the intended airflow path, avoid obstructed ventilation and verify that the room’s cooling design can handle the total heat load of all installed equipment. FourTeck.com can help buyers identify the technical questions to resolve with their network and facilities teams before delivery coordination.
Questions Enterprise Buyers Ask Before Choosing This Firewall
A high-capacity firewall purchase usually involves network architects, security teams, procurement, facilities and finance. The questions below focus on fit, sizing, compatibility, licensing and project readiness so each team can understand what must be confirmed before a quotation becomes an implementation plan.
Is this firewall suitable for a large head office or data center?
Yes, it is designed for high-capacity enterprise security use, including internet edges, segmentation, VPN concentration and secure WAN roles. Suitability still depends on inspected throughput, encrypted traffic, session load, network topology and resilience requirements. A data center with heavy east-west traffic should calculate the flows that will actually traverse the firewall, not just the speed of its internet circuits.
How should we size it if our internet links are below its maximum firewall throughput?
Use protected workload rather than raw link speed. Include IPS, application control, malware protection, SSL inspection, VPN encryption, logging, internal segmentation and peak traffic. Published firewall throughput represents specific test conditions and can be much higher than throughput with multiple security services enabled. Capacity headroom is valuable because policies become richer and encrypted application usage typically grows over the device lifecycle.
What is the practical advantage of the 901G storage variant?
The 901G version includes two 480GB onboard SSDs, while the corresponding 900G model does not provide the same onboard storage. Local storage can support logging-related operational needs and provide more flexibility where on-box storage matters. Enterprises with formal retention, reporting or analytics requirements should still evaluate centralized logging and management platforms rather than assuming local SSD capacity replaces a wider logging architecture.
Can we deploy this model in an ordinary AC-powered server room?
Not without a suitable DC power design. This specific variant expects 48–60V DC input and is intended for restricted-access installation. If the site only provides conventional AC feeds and does not have approved DC distribution, the AC-powered 901G variant may be the more appropriate discussion. Facilities and network teams should confirm power type before the hardware code is finalized.
Which transceivers and cables should be included in the project?
That depends on the peer devices, link speeds, fiber type, wavelength and distance. The appliance includes SFP, SFP+ and SFP28-capable slots, but a complete project should list each required optic and cable explicitly. Share the make and model of adjacent switches or routers and the intended port mapping with FourTeck.com so suitable components can be reviewed before quotation.
What subscription should procurement budget for?
The answer depends on required FortiGuard security services, FortiCare support level and preferred term. Appliance-only, UTP-style and broader enterprise protection packages can have very different commercial profiles. Define the actual controls needed—such as IPS, web security, application control and malware protection—then choose the bundle and term that aligns with operational policy and renewal planning.
Should we buy one unit or design an HA pair?
Critical internet and data-center edges often justify high availability, but the decision depends on business downtime tolerance. An HA pair requires two appliances, matching subscriptions where applicable, additional optics, rack space, HA connectivity and redundant upstream paths. It should be planned as an end-to-end resilience architecture rather than simply purchasing a second chassis and assuming every other single point of failure has disappeared.
Can it replace our existing firewall without changing the network design?
Possibly, but a like-for-like replacement should never be assumed. Review VLANs, routes, NAT rules, VPN peers, certificates, authentication, policy objects, SD-WAN behavior and interface media before migration. Legacy configurations often contain obsolete rules or assumptions that should not be copied blindly. A planned migration can preserve required behavior while cleaning up unnecessary policy and improving documentation.
What information helps FourTeck.com prepare a more accurate quote?
Share the target model, current firewall, WAN speeds, protected throughput, VPN and branch count, required security services, subscription term, HA requirement, DC power readiness, high-speed interface needs, optics, logging platform, installation scope and delivery location. These details allow the commercial proposal to include the hardware and related components needed for the real project instead of quoting only a base appliance.
Business Requirements to Match Before You Buy
For a high-bandwidth enterprise edge
A suitable option when internet, cloud and internal security traffic require substantial inspection capacity. Buyers should estimate traffic with security profiles enabled and keep reserve capacity for future growth rather than comparing only current ISP speed.
For a DC-powered network rack
This variant fits environments with engineered 48–60V DC distribution. Facilities teams should confirm protected feeds, approved cable gauge, terminal hardware, restricted access and airflow before ordering.
For a regional branch aggregation point
Organizations connecting many branches can evaluate secure SD-WAN and IPsec capacity together with session scale, authentication, routing and centralized management requirements. The hub should be sized for combined traffic during peak use and failover events.
For projects needing local SSD storage
The 901G variant provides two 480GB SSDs. Buyers should decide whether local storage is needed for operational logging and whether centralized analytics or longer retention will also be required.
For phased 1GE, 10GE and 25GE migration
The mixed port layout supports modern high-speed uplinks alongside existing gigabit connections. Procurement should still map every link and optic to avoid incompatibility during migration.
For a resilient perimeter refresh
Teams replacing an older firewall should review HA, upstream redundancy, subscription renewal dates, routing, NAT, certificates and change windows so the new platform improves continuity rather than reproducing old single points of failure.
What Buyers Should Check Before Purchase
The appliance code tells you the hardware family, but a complete firewall purchase includes far more than the chassis. Security subscriptions, support duration, optics, power readiness, high availability, logging, migration work and renewal ownership can change both the project cost and the operational outcome. Procurement should therefore build a checklist with the technical team before requesting final pricing.
Correct Model Selection
Confirm that DC power is actually required. If the facility is AC-only, the corresponding AC model may be more appropriate. Also decide whether the onboard storage of the 901G variant adds value compared with the 900G option.
Security Bundle Fit
List the protections the business expects to use, then map them to available FortiGuard and FortiCare options. Avoid choosing a bundle only because its term looks convenient; verify the actual services and support level.
Power and Rack Requirements
Check DC feed voltage, protection, rack space, airflow, cable gauge and restricted-access conditions. Include the facilities team in sign-off for any DC-powered deployment.
Optics and Cabling
Identify every 25GE, 10GE and fiber gigabit link, including peer device, fiber type, wavelength and distance. Missing transceivers can delay a deployment even when the firewall itself arrives on time.
Migration Scope
Document existing policies, routes, VPNs, certificates, authentication, public IPs and critical applications. Decide what should be migrated, redesigned or retired before the change window.
Warranty and Lifecycle
Confirm the support term, hardware replacement expectations and renewal process attached to the exact quotation. Warranty and FortiCare handling can depend on the purchased service and supply arrangement.
Long-Term Operating Cost
Budget for renewals, support, possible centralized logging, optics, spare components, implementation and administration. The lowest chassis price does not necessarily represent the lowest total project cost.
Quote Preparation
Provide bandwidth, protected throughput, branch count, VPN use, license term, HA need, rack power and delivery location. A complete requirement allows FourTeck.com to quote the relevant hardware and supporting items together.
For project supply or bulk requirements, it is useful to identify whether all sites will use the same model or whether the 901G DC unit will act as a central hub with smaller FortiGate models at branches. Standardization can simplify operations, but only when every site is sized correctly. FourTeck.com can help review replacement models, alternatives and related components when the exact requested configuration is not the best fit for the operational requirement.
UAE Availability and Service Support
FourTeck.com supports enterprise firewall inquiries in Dubai and across the UAE with assistance for product selection, configuration review, quote requests, delivery coordination and warranty guidance. Availability can vary according to the exact hardware SKU, FortiCare or FortiGuard bundle, required term, order quantity, supplier position and project timing. For that reason, the page does not claim permanent stock or a guaranteed delivery date.
For the DC model, the pre-sales conversation should include more than quantity and delivery address. The buyer should confirm whether the target rack genuinely uses 48–60V DC, whether the organization requires one appliance or an HA pair, and which high-speed ports will connect to the surrounding network. Where SFP28, SFP+ or SFP optics are needed, they should be specified as separate project items instead of left until installation day. Security subscription term, logging requirements and migration support should also be included when relevant.
FourTeck.com can help coordinate these inputs between procurement and IT so the quote is easier to approve and the delivered equipment aligns with the planned architecture. Warranty handling and support expectations should always be confirmed against the specific commercial offer because they may depend on the selected FortiCare service and supply route.
Dubai, Abu Dhabi, Sharjah and Ajman Coverage
Businesses in Dubai, Abu Dhabi, Sharjah, Ajman and other UAE locations can contact FourTeck.com for current product availability, configuration guidance and quotation assistance. A central data-center buyer may need a very different proposal from a corporate office or multi-site organization, even when the requested model is identical. Share the deployment location, rack power type, required security services, HA design, optics, delivery expectations and implementation scope so the quotation reflects the actual project. FourTeck.com can also help buyers review related Fortinet options when a different power variant, capacity class or storage configuration would better match the site.
Regional Availability for GCC and Africa Projects
FourTeck.com also supports business technology inquiries for selected GCC and Africa markets where organizations need coordinated procurement, replacement planning or standardized security architecture across multiple countries. Companies with sites in Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Kenya, Uganda and other regional locations can discuss hardware, security subscriptions and sourcing requirements through the relevant FourTeck inquiry channels.
Regional deployments require extra care because availability, delivery process, import requirements, warranty handling, support terms and local power infrastructure can differ by country. A DC-powered appliance may suit one network facility but not another. Multi-country projects should therefore list each destination, required quantity, desired bundle term, power type, optics, implementation responsibility and target schedule instead of assuming one commercial package applies everywhere.
For distributed organizations, the central 900G-series platform may be considered for a regional hub while smaller models serve branch locations, but the architecture should be based on actual traffic and inspection requirements. Useful regional resources include FourTeck Kenya, FourTeck Uganda, FourTeck Africa and FourTeck Kuwait. Availability remains subject to the exact product, supplier status and destination requirements.
Other Fortinet Options Buyers May Consider
The right firewall depends on the workload, not on choosing the highest model number. Buyers comparing this appliance may also review Fortinet models designed for smaller branches, mid-size offices or other enterprise capacity levels. The cards below provide useful internal navigation without implying that one model is universally better.
FortiGate 100F
A lower-capacity option often considered for mid-size offices and enterprise branches where 900G-series scale is unnecessary.
FortiGate 90G
Useful for smaller business edges and branch deployments that need modern Fortinet security without data-center scale.
FortiGate 60F
A compact branch firewall choice for growing SMB environments where secure internet, VPN and SD-WAN are the main requirements.
FortiGate 40F
Suitable for compact offices and small branch networks when sizing shows that entry-class security performance is sufficient.
For large enterprise alternatives such as higher-capacity G-series or storage variants, contact FourTeck.com with your bandwidth, inspection, interface and power requirements. The team can help identify whether the requested model should be retained, changed to the AC variant, paired for high availability or compared with another Fortinet platform based on the project scope.
Why Business Buyers Contact FourTeck.com
Enterprise security procurement involves technical and commercial decisions that are tightly connected. Buying the right hardware but the wrong service bundle can create a protection gap. Buying the right firewall without optics can delay installation. Choosing a DC model for an AC-only rack can stop the project before configuration begins. FourTeck.com focuses the pre-sales discussion on these dependencies so buyers can prepare a more complete requirement.
Help with sourcing conversations for enterprise hardware and related project items.
Review bandwidth, security profiles, power, interfaces, storage and HA considerations before quotation.
Build the commercial request around hardware, subscriptions, optics and delivery needs.
Coordinate delivery requirements after availability and order details are confirmed.
Clarify support and warranty expectations against the selected FortiCare and supply terms.
Discuss suitable alternatives when power, lifecycle, capacity or project constraints change.
FourTeck.com supports SMB, enterprise and project buyers without assuming every organization needs the same configuration. A buyer with a single large headquarters may prioritize inspection and redundancy, while a regional organization may focus on SD-WAN, tunnel scale and centralized administration. A telecom-style facility may care first about DC power and rack integration. By sharing the technical context early, buyers can receive a proposal that is easier for IT, procurement and finance to evaluate together.
The goal is practical purchase confidence: understand what the appliance does, verify that it fits the environment, identify the licenses and accessories required, and know which details remain configuration dependent. For direct assistance, use the FourTeck.com contact page and include the project information that affects sizing and supply.
Frequently Asked Questions
What is the FG-901G-DC mainly used for?
It is used as a high-capacity next-generation firewall for enterprise internet edges, data-center segmentation, secure SD-WAN, VPN concentration and security-zone enforcement. The DC power variant is especially relevant where the rack uses 48–60V DC distribution. The exact deployment role should be based on inspected traffic, network topology, resilience needs and the FortiGuard security services that will be enabled.
Does the appliance include onboard storage?
Yes. The 901G variant includes two 480GB onboard SSDs. That local storage can support logging-related operational requirements, but organizations with formal reporting, long retention periods or multi-device analytics should also evaluate centralized logging platforms and retention policy. Storage requirements should be defined during design instead of assuming the onboard SSD capacity alone meets every compliance or reporting need.
Is this model available for Dubai and UAE projects?
FourTeck.com can assist with current UAE availability checks, quotations, configuration guidance, delivery coordination and warranty guidance. Availability can change according to appliance SKU, support or security bundle, order quantity and supplier status, so no permanent stock claim is made. Share your required quantity, security term, power type, optics and project schedule for a more useful availability discussion.
Can FourTeck.com help select a FortiGuard or FortiCare bundle?
Yes. The best bundle depends on which security services the organization plans to use, the desired support level and the renewal term. Buyers should define needs such as IPS, application control, web protection, malware defense and support expectations before selecting a package. FourTeck.com can help review the commercial options available for the requested deployment.
Does the DC version require special installation planning?
Yes. Fortinet specifies 48–60V DC input and restricted-access installation conditions for the DC models. DC cabling must be properly sized, routed and secured, with the vendor guide specifying a minimum 12 AWG cable size. Facilities and network teams should verify feeds, protection, rack access and airflow before deployment. If the site is AC-only, discuss the corresponding AC-powered model instead.
Can it be deployed as a high-availability pair?
The platform supports high-availability configurations. A resilient deployment should be designed beyond the two chassis: include independent power feeds, redundant upstream network paths, appropriate HA links, duplicated optics and a tested failover procedure. Subscription and support requirements for both units should be confirmed in the quotation. The business should define its acceptable downtime and recovery expectations before finalizing the HA architecture.
How should we request a quotation?
Use the FourTeck.com contact page and share the exact model, quantity, current firewall, WAN bandwidth, protected traffic estimate, branch and VPN requirements, FortiGuard services, desired support term, HA requirement, DC power readiness, optics, logging approach, implementation scope and delivery location. The more complete the requirement, the easier it is to prepare a useful commercial and technical proposal.
Should we choose the 900G or 901G variant?
The main hardware distinction is onboard storage: the 901G includes two 480GB SSDs, while the corresponding 900G model does not provide that storage. Choose based on logging and operational requirements, then separately confirm AC versus DC power. Performance sizing, security subscriptions, interface requirements and HA design should still be evaluated for the complete deployment rather than selected only by storage preference.
Are optics and transceivers included for every high-speed port?
Do not assume every required optic is included. The appliance offers multiple SFP, SFP+ and SFP28 slots, and the correct transceiver depends on the peer equipment, speed, fiber type, wavelength and distance. Include optics and cables as explicit line items in the project scope. FourTeck.com can help review these requirements when the surrounding switch or router details are provided.
Need Help Planning the Right Firewall Configuration?
FourTeck.com can help you review appliance availability, DC power readiness, interface and optic requirements, FortiGuard services, FortiCare term, high availability, migration scope and UAE delivery needs. Share your bandwidth, security and deployment requirements so the quotation reflects the real project.
