ZKTeco HBL100B Hybrid Biometric Smart Lock in Dubai, UAE
Designed for controlled entrances where convenience and identity verification matter, this ZKTeco smart lock combines facial recognition, fingerprint authentication on the HBL100B model, supported card access, touch-screen operation and wireless mobile management in a compact reversible door-lock format. It can suit executive offices, managed apartments, villas, meeting spaces and selected light-commercial entrances when the door construction and mortise are compatible. FourTeck.com helps UAE buyers review the installation requirement, current lifecycle position, accessories and quotation details before purchase.
Request QuoteCheck UAE Availability
Quick Product Information
ZKTeco
HBL100B
Hybrid biometric smart door lock
100 users
Face, fingerprint on HBL100B, card, passcode/phone/key functions based on supported setup
BLE 4.0 / Zigbee as listed by ZKTeco regional documentation
30–60 mm standard
Rechargeable lithium battery; 8×AA alkaline option listed
-20 °C to +55 °C
EOL on current international ZKTeco listing; confirm current options
Selection, quote, delivery coordination and warranty guidance
Share door, quantity and access requirements with FourTeck.com
Buyer Snapshot: Is This Lock a Practical Fit?
Busy procurement teams usually need to know five things quickly: whether the lock supports the required identity methods, whether it physically suits the door, whether the selected mortise matches the installation, whether the wireless features fit the management approach, and whether the model is still appropriate for a new project given its lifecycle status. The cards below summarize those decision points.
Controlled office, residential and managed-property entrances where multiple authentication methods are preferred over a basic mechanical lock.
Face, fingerprint and supported credential methods can reduce dependence on one physical key and improve convenience for approved users.
Confirm door thickness, handing, mortise, quantity, preferred credentials, power expectations and any mobile-management requirement.
A good match for individual managed doors; large enterprise estates may need a broader centrally managed access-control architecture instead.
Because the family is marked EOL by ZKTeco, new projects should compare remaining supply with current-generation alternatives.
FourTeck can help organize the requirement, review suitable alternatives and prepare a quote based on project and delivery details.
Product Overview
The ZKTeco HBL100B Hybrid Biometric Smart Lock is built for buyers who want more than a traditional key-operated door lock but do not necessarily need a full building access-control panel, reader network and server platform for every individual door. Its design places biometric recognition, credential input, the lock mechanism and local user interaction into one integrated product. ZKTeco positions the family within smart home security and identifies the HBL100B/HBL200B range as a hybrid biometric lock with wireless connection, facial recognition, lockout mode, smart alarm, touch screen, mobile management and a reversible design.
The HBL100B variant is especially relevant where both face and fingerprint recognition are desired. ZKTeco regional documentation lists a semiconductor fingerprint sensor for the HBL100 version, while the wider family supports facial recognition and credential-based operation. For an office owner or facilities manager, that means a single entrance can be configured around more convenient identity methods instead of distributing conventional keys to every user. For a residential or managed-property environment, it provides a modern interaction model while retaining the need for careful physical installation and access-policy planning.
The product is designed around a standard door thickness of 30 to 60 mm. ZKTeco documentation lists a zinc-alloy construction, an American standard single-latch mortise and an optional German standard mortise. The front assembly measures 86 × 236 × 37 mm, while the rear assembly measures 84 × 236 × 38 mm. These details matter because a smart lock is not simply an electronic accessory that can be attached to any door. The mortise, backset, door preparation, edge condition and handle orientation need to be checked before purchase. A reversible design improves flexibility, but it does not remove the requirement for a compatible door.
For Dubai and UAE procurement, another important factor is lifecycle. The current ZKTeco international listing labels the HBL100B/HBL200B family EOL. That does not automatically mean every unit is unavailable, but it does mean buyers should approach new projects with additional care. Existing installations may still require replacement units or matching hardware, while new projects should consider whether a current-generation alternative offers a better support path. FourTeck.com can help buyers organize those questions before quotation, including required quantity, installation environment, preferred access methods, door measurements, delivery location and acceptable alternatives.
Key Business Benefits
◆ Multiple Ways to Authenticate
A door policy does not need to depend on one credential type. Facial recognition, fingerprint on the HBL100B, supported card methods and other listed lock functions give buyers more flexibility when deciding how employees, residents or approved visitors should gain access. Multiple methods can also make day-to-day use easier when one credential is inconvenient for a particular user.
◆ Reduced Key Administration
Organizations that frequently issue and recover mechanical keys can benefit from identity-based access. The practical value is not simply that the lock is electronic; it is that authorized users can be enrolled according to the chosen access method, reducing the number of routine situations where physical key distribution is the only option.
◆ Local Smart-Door Convenience
For an individual office, executive room, apartment or selected internal entrance, an integrated smart lock can be simpler to deploy than a larger access-control system. Buyers should still compare that simplicity with their need for centralized monitoring, audit, integration and lifecycle management, especially when many doors are involved.
◆ Wireless Management Options
ZKTeco lists wireless communication and mobile management for this family. That can make setup and routine administration more convenient in suitable deployments. The exact management workflow should be confirmed for the unit and region being supplied, particularly when a buyer expects remote operation, app compatibility or integration with a broader smart-property environment.
◆ Flexible Door Orientation
The reversible design can accommodate different door-opening directions, which is valuable in projects where room layouts are not identical. This should be treated as installation flexibility rather than universal compatibility. The door thickness, mortise and existing cut-outs still need to be checked before the lock is ordered.
◆ Practical Battery Operation
ZKTeco lists a rechargeable lithium battery and an optional eight-AA alkaline arrangement, with more than 6,500 operations specified for lithium-battery use. Battery-powered operation can simplify deployment where a wired power feed to the door is undesirable, but battery inspection and replacement planning remain part of normal facilities maintenance.
Product Highlights That Matter to Buyers
The strongest reason to evaluate this model is the combination of biometric and electronic credential choices in one integrated door product. Facial recognition provides contactless identification, while the HBL100B model adds fingerprint capability. Supported card access and the touch-screen interface provide additional ways to operate the lock, and ZKTeco documentation for the family also references passcode, phone and key functions. For buyers, the value lies in being able to select an access method that suits the people using the door rather than forcing every user into one credential process.
The hardware is also designed around practical door installation. The reversible arrangement can help with left- or right-opening layouts, the documented standard door thickness is 30–60 mm, and the family supports an American standard single latch with a German standard mortise listed as an option. Those details make the lock more adaptable than a fixed-orientation design, but they also underline why measurement is essential. A buyer replacing an older lock should provide clear photos, door thickness, existing mortise dimensions and the opening direction before a supplier confirms suitability.
Wireless communication is another practical feature. Regional ZKTeco documentation lists BLE 4.0 / Zigbee and the international page highlights mobile management. This can be useful when local administration from a compatible mobile workflow is part of the requirement. It should not be assumed, however, that the lock offers the same centralized controls as an enterprise access platform. Buyers managing many doors, multiple sites or formal security policies should decide whether a standalone smart-lock approach or a networked access-control system better matches governance needs.
Finally, lifecycle must be part of the decision. Because ZKTeco now marks the family EOL, the HBL100B may be most relevant for matching existing deployments, fulfilling a replacement need, or where confirmed remaining supply satisfies a specific project. A greenfield project should compare current ZKTeco alternatives before standardizing on an end-of-life platform.
Technical Specifications
| Specification | ZKTeco HBL100B Details |
|---|---|
| Brand | ZKTeco |
| Model | HBL100B |
| Product category | Hybrid biometric smart lock |
| Material | Zinc alloy |
| Biometric methods | Facial recognition; semiconductor fingerprint sensor listed for HBL100 |
| Card support | IC / Mifare card support as listed by ZKTeco sources |
| User capacity | 100 users |
| Communication | BLE 4.0 / Zigbee listed in regional manufacturer documentation |
| Display | Touch-screen interface; manufacturer catalogue lists a 2.8-inch capacitive screen for the family |
| Mortise | American standard single latch; German standard mortise optional |
| Door thickness | 30–60 mm standard |
| Power supply | Rechargeable lithium battery; 8×AA alkaline battery optional |
| Battery life | Over 6,500 operations for lithium-battery use |
| Operating temperature | -20 °C to +55 °C |
| Front dimensions | 86(W) × 236(L) × 37(D) mm |
| Rear dimensions | 84(W) × 236(L) × 38(D) mm |
| Languages | English / Spanish / Portuguese |
| Design | Reversible door-opening design |
| Lifecycle status | EOL on current international ZKTeco listing |
| Warranty / availability | Supplier and country dependent; confirm current options with FourTeck.com |
The correct configuration is the one that matches the actual door and the access policy. A 30–60 mm door-thickness range is helpful, but it should not be treated as the only installation check. If the door already contains another lock, the existing mortise opening may not align with the HBL100B hardware. Similarly, a project that requires fingerprint enrollment should specifically confirm the HBL100B version rather than assuming the same capability across the wider HBL100B/HBL200B family. Buyers should also confirm whether the lithium-battery arrangement or optional AA-battery setup is expected, and whether the selected wireless-management method is supported by the delivered regional unit. For replacements, provide the old model, photos of both sides of the door and the door edge, plus dimensions. For new doors, involve the installer before the door is drilled so the lock and mortise can be coordinated correctly.
Configuration and Buyer Guidance
A smart lock should be purchased from a requirement sheet, not from a model number alone. The first question is the door: What is the thickness, material and opening direction? Is an American single-latch mortise appropriate, or does the project require the optional German-style mortise? Is the door new and uncut, or is the lock replacing existing hardware? These details can determine whether installation is straightforward or whether door modification is needed.
How will users authenticate?
Decide whether face, fingerprint, card, passcode, phone-based management or a combination is required. Confirm the exact supported methods on the supplied unit before rollout.
How many people need access?
The documented capacity is 100 users. A buyer approaching that limit should consider user turnover, temporary access and whether a centrally managed access-control solution would be more scalable.
What maintenance is acceptable?
Battery-powered locks require a routine check process. Plan who will monitor low-battery warnings, recharge or replace batteries, and retain appropriate backup access procedures.
Is this a new project or replacement?
The EOL status changes the purchasing discussion. Existing deployments may prioritize matching hardware; new projects should compare current alternatives and long-term support.
Do you need central control?
A smart lock is not automatically a substitute for enterprise access control. Multi-door sites may need centralized permissions, reporting, integration and standardized administration.
What should you send for a quote?
Share quantity, door thickness, door photos, opening direction, mortise requirement, authentication preference, project location, expected delivery timing and acceptable replacement options.
FourTeck.com can use that information to make the quotation discussion more useful. It also reduces the risk of ordering a smart lock that appears correct by name but does not match the door, access policy or lifecycle expectations of the project.
Ideal Business and Property Use Cases
The lock fits best where a limited number of controlled doors need convenient identity-based access without the complexity of a full access-control infrastructure. The correct use case depends on security policy, door construction and management requirements. The examples below are practical situations in which the product may be considered, subject to a compatibility review.
Executive and Management Offices
An executive room or management office may benefit from biometric access when the organization wants to reduce conventional key circulation. The user capacity is sufficient for a defined group, while multiple access methods can accommodate different authorized users.
Meeting and Restricted Rooms
Selected internal rooms containing confidential documents, equipment or controlled resources can use a smart lock where a local access solution is acceptable. For audited or regulated environments, buyers should verify whether a centrally logged access platform is required instead.
Managed Apartments and Villas
Property owners can evaluate the lock for individual residences where face, fingerprint or credential access improves daily convenience. Door dimensions, climate exposure and management workflow should be checked before installation.
Small Professional Offices
Consultancies, clinics, studios or small offices with a limited number of users may prefer an integrated lock over a larger access-control project. The buyer should still decide how permissions will be managed when staff join or leave.
Replacement for an Existing HBL Installation
Where the same family is already installed, a matching replacement can reduce change to the existing door and user workflow. Because the product is EOL, the exact hardware and remaining supply should be confirmed before relying on it as a long-term standard.
Showrooms and Private Service Areas
A private back office, stock room or staff-only room in a customer-facing environment can be a suitable candidate when the security requirement is moderate and the installation is compatible. Higher-risk storage areas may require a more comprehensive controlled-access design.
The most important distinction is between an individual smart door and an enterprise access-control estate. If a project contains dozens of doors, requires centralized policy, detailed reporting, time-based rules, integration with alarms or HR systems, or coordinated user deactivation across sites, buyers should compare a controller-and-reader solution rather than selecting standalone locks independently. FourTeck.com can help frame that decision before a quote is prepared.
ZKTeco HBL100B Hybrid Biometric Smart Lock Biometric Access
The central feature of this model is the ability to identify approved users through biometrics rather than relying only on something they carry. Facial recognition supports a contactless interaction, and the HBL100B version adds a semiconductor fingerprint sensor according to ZKTeco regional documentation. In a workplace or managed residence, that can make access more natural for regular users because they do not need to present the same physical card or key every time they approach the door.
The business value of biometrics is strongest when the enrollment process is managed carefully. The lock has a documented user capacity of 100, so administrators should define who is entitled to access, how new users are enrolled, and how former users are removed. A small office with predictable staff turnover can manage that locally. A larger organization with frequent changes across many doors may find local enrollment less efficient than centralized access control. That is why the number of doors matters as much as the number of users.
Multiple authentication options also improve flexibility. A person who cannot conveniently use one biometric method may be able to use another supported credential. A visitor or temporary user may need a different process from a permanent resident or employee. Buyers should define these user groups before purchase rather than deciding after installation. The goal is not to enable every possible method without policy; it is to choose the right methods for the security and convenience requirement.
Biometric access should also be evaluated alongside physical security. A smart recognition system cannot compensate for a weak door, unsuitable frame, incorrect mortise installation or poor maintenance. The complete door assembly needs to support the security expectation. For higher-security business applications, consider the whole entrance design, not only the recognition technology on the lock.
ZKTeco HBL100B Hybrid Biometric Smart Lock Wireless Management
Wireless capability is useful because it can simplify how a local smart lock is configured and managed. ZKTeco describes the family as having wireless connection and mobile management, while regional product documentation lists BLE 4.0 / Zigbee. This positions the lock differently from a purely standalone keypad or fingerprint device that must be managed only at the door. For suitable deployments, a mobile workflow can make routine administration more convenient.
The important purchasing question is what level of wireless management the buyer actually expects. Local Bluetooth management, a compatible mobile application and a wider smart-home or property platform are not the same thing. A buyer should clarify whether the requirement is simply to enroll or configure the lock from a phone, to operate the lock within local wireless range, to integrate with a broader platform, or to administer multiple doors centrally. These expectations should be written into the quote request so the supplied configuration can be checked against them.
Wireless access also introduces operational planning. Someone must own the administrative credentials, mobile devices used for configuration should be controlled, and the organization needs a process for changing administrators if a staff member leaves. For managed property, the owner should decide who can add users and what happens when occupancy changes. In a business, facilities or IT teams may need responsibility assigned clearly rather than leaving administration to an individual user.
For buyers comparing this EOL model with current ZKTeco products, wireless management is one area that deserves direct comparison. Newer products may offer different app ecosystems, connectivity methods or remote-management features. FourTeck.com can help buyers state the required management outcome first, then compare models that meet it rather than assuming every smart lock behaves the same way.
ZKTeco HBL100B Hybrid Biometric Smart Lock Door Fit and Battery Planning
Physical fit is often the difference between a successful smart-lock purchase and an expensive installation problem. ZKTeco specifies a standard door thickness of 30–60 mm for this family, with front and rear assemblies that occupy a substantial area around the handle. That means the installer needs enough flat door surface for the hardware, correct clearance around decorative trim, and a compatible mortise position. A reversible design helps accommodate different opening directions, but it does not make the lock universal.
For replacement projects, existing cut-outs are especially important. Removing a previous digital lock may reveal a mortise pocket, spindle hole or screw pattern that does not match the HBL hardware. Buyers should supply photographs of the door face, inside face and door edge, plus measurements of thickness and the existing lock position. If the door is new, the better approach is to confirm the lock before final machining so the installer can prepare the correct mortise and mounting holes.
Battery planning is equally practical. ZKTeco lists a rechargeable lithium battery and an optional eight-AA alkaline arrangement. The manufacturer states more than 6,500 operations for lithium-battery use. That figure is useful for understanding the product design, but actual maintenance intervals depend on usage patterns, battery condition, environmental factors and how the lock is operated. Facilities teams should not wait for a battery to fail before establishing a routine check.
A good deployment plan includes responsibility for battery charging or replacement, a response to low-battery alerts, retention of appropriate emergency access and documentation for administrators. These tasks are small compared with a full access-control system, but they become significant when several smart locks are installed across a property. Buyers standardizing on multiple doors should include maintenance workload in the decision, not just initial hardware cost.
Questions Business Buyers Ask Before Choosing This Smart Lock
The following questions help procurement teams, facilities managers, property administrators and business owners decide whether this lock matches the door, the user group and the management model. They also help identify when a newer product or a more centralized access-control solution may be more appropriate.
Who is this lock best suited for?
It is best suited to controlled individual doors in offices, executive rooms, apartments, villas and selected managed-property environments where biometric and electronic credentials are preferred. It is less suitable as a direct substitute for a fully centralized enterprise access-control platform when many doors, detailed reporting, integration or complex policy management are required.
Can it support a small office team?
Yes, the documented capacity is 100 users, so it can fit a small office or defined access group when local management is acceptable. Buyers should still consider staff turnover, temporary users and how many separate doors need to be administered. If the organization is growing quickly, a centrally managed solution may scale more efficiently.
Will it fit my existing door?
It may fit if the door is within the standard 30–60 mm thickness range and the mortise and mounting area are compatible. Thickness alone is not enough. Existing cut-outs, spindle position, handle clearance, door edge preparation and opening direction should be checked. Photos and measurements should be reviewed before a replacement order is placed.
Does the HBL100B include fingerprint recognition?
Yes. ZKTeco regional product documentation specifies a semiconductor fingerprint sensor for the HBL100 version, while the family also supports facial recognition. Buyers should confirm the exact model on the quotation because the related HBL200B does not carry the same fingerprint designation in the manufacturer documentation.
What should I check about mobile management?
Confirm the exact management workflow expected from the supplied unit. ZKTeco lists wireless connection, mobile management and BLE 4.0 / Zigbee in regional documentation. Buyers should clarify whether they need local phone-based administration, specific app compatibility, remote operation or integration with another platform. These are different requirements and should not be assumed automatically.
Is it a good choice for a new multi-door project?
A new multi-door project should compare current-generation alternatives first because ZKTeco marks this family EOL. Even if remaining units can be sourced, a new standard should be evaluated for future availability, support and consistency. For many doors, also compare a centrally managed access-control architecture against standalone smart locks.
What battery option should a buyer request?
ZKTeco lists a rechargeable lithium battery and an optional eight-AA alkaline arrangement. The lithium configuration is associated with the manufacturer’s stated figure of more than 6,500 operations. Buyers should confirm which power package is included in the offered unit, how charging or battery replacement will be handled and who will maintain the lock after installation.
What should I check when replacing an older smart lock?
Check the old lock model, door thickness, mortise dimensions, screw and spindle positions, handle clearance, door handing and the authentication methods currently used. A like-for-like electronic feature list does not guarantee mechanical compatibility. Providing detailed door photos before quotation can help identify whether the new lock is a practical replacement or requires door modification.
What information should I send FourTeck.com for an accurate quote?
Send required quantity, project location, door thickness, door-opening direction, photos of the door and edge, preferred mortise, required authentication methods, expected management method, target delivery timing and whether current-generation alternatives are acceptable. For replacement projects, include the old lock model. This information helps turn a model inquiry into a practical procurement recommendation.
Common Business Requirements This Product Can Support
For businesses that want less dependence on physical keys
Biometric and supported credential methods allow approved users to access a door without every person relying on the same conventional key workflow. The organization should still retain a clear administrator process for enrollment and removal.
For an executive room or limited-access office
The 100-user capacity and integrated design can suit a defined group where a local smart lock is sufficient. Buyers that need company-wide policy, detailed reporting or many controlled doors should consider a broader access-control platform.
For buyers replacing an installed HBL-family lock
A matching model may reduce changes to an existing deployment, but the exact mechanical fit should still be checked. Because the family is EOL, buyers should also ask about current supply and an alternative migration path.
For projects that need more than one authentication method
Face, fingerprint on the HBL100B and supported electronic credentials can accommodate different user situations. The buyer should define which methods are mandatory and confirm that the supplied regional unit supports the expected workflow.
For door projects where orientation varies
The reversible design provides useful flexibility across left- and right-opening doors. This feature should be combined with a check of thickness, mortise, handle clearance and existing door preparation before ordering.
For procurement teams that need lifecycle clarity
The EOL status means the quote should address more than price and quantity. Buyers should confirm whether the goal is a replacement, a short-term matching requirement or a new standard that would be better served by a current model.
What Buyers Should Check Before Purchase
The most common purchasing mistake with a smart lock is assuming that electronic features are the whole specification. In practice, a correct purchase needs a match between the door, the mortise, the power arrangement, the people using the entrance, the management process and the expected product lifecycle. A buyer who checks these items before requesting a quote can reduce installation surprises and avoid standardizing on hardware that does not fit the long-term requirement.
Configuration Fit
Confirm HBL100B specifically if fingerprint is required. Define face, fingerprint, card, passcode and mobile-management expectations. Also confirm the battery package and the exact wireless communication supported by the supplied unit.
Door Compatibility
Measure the 30–60 mm door thickness, identify door handing, photograph the door edge, check the current mortise and inspect clearance around the handle area. Reversible design helps with orientation but does not resolve an incompatible mortise or cut-out.
Lifecycle and Warranty
The manufacturer’s EOL label should be discussed openly in the quote. Confirm whether units can still be supplied, what warranty terms apply to the offered stock and which current model is recommended if a new project needs longer-term continuity.
Administration Model
Decide who can enroll users, remove users and manage the mobile workflow. For several doors, calculate the administrative effort of local smart locks versus a central access-control system. The simplest hardware choice is not always the simplest operational choice.
Maintenance Planning
Identify who will monitor battery condition, recharge or replace batteries and respond to low-battery alerts. Retain a documented emergency-access procedure so a routine maintenance issue does not become a door-access problem.
Quote Preparation
Provide quantity, location, door dimensions, photos, opening direction, mortise preference, required credentials, management expectations and acceptable alternatives. If the project replaces an older lock, include its brand and model so the mechanical change can be assessed.
Long-term cost should also include installation, door modification if required, battery maintenance, user administration and the possibility of future model migration. These are more meaningful to a business buyer than comparing hardware price alone. FourTeck.com can help organize these factors into a quotation request that reflects the actual project rather than a simple model-name purchase.
UAE Availability and Service Support
FourTeck.com supports smart-lock and business-security inquiries in Dubai and across the UAE with assistance for product selection, configuration review, quotation requests, delivery coordination and warranty guidance. Availability can vary according to remaining supplier stock, exact model, regional package and order quantity. This is particularly important for the HBL100B family because the current international ZKTeco listing identifies it as EOL.
For an existing installation, FourTeck.com can help structure the inquiry around replacement needs. Share the current lock model, photos of the installed door, door thickness, mortise type, required quantity and whether a current-generation alternative is acceptable. For a new project, the discussion should begin with the requirement rather than the legacy model. That allows current ZKTeco smart locks or a broader access-control solution to be considered if they offer a better long-term fit.
Delivery timing and warranty handling should be confirmed on the quotation because they can depend on the source of supply and the product’s lifecycle status. FourTeck.com does not need to assume ready stock to help a buyer: the team can review the requirement, check the available sourcing path and propose practical alternatives where necessary.
Coverage for Dubai, Abu Dhabi, Sharjah and Ajman
Businesses and property buyers in Dubai, Abu Dhabi, Sharjah, Ajman and other UAE locations can contact FourTeck.com for availability guidance, quotation support and product-selection assistance. For a smart lock, location is only one part of the requirement. The quote should also identify the door type, quantity, authentication methods, whether the request is for a replacement or new project, and any installation constraints. By collecting those details first, buyers can receive a more practical response than simply asking whether a model name is available. FourTeck.com can also discuss current alternatives when an end-of-life model is not the most suitable choice for a new deployment.
Regional Availability Across GCC and Africa Markets
FourTeck.com also supports business technology inquiries across selected GCC and Africa markets through regional inquiry channels. Buyers in Saudi Arabia, Qatar, Oman, Kuwait and Bahrain can request guidance on product availability, suitable alternatives and delivery planning, while organizations in Kenya, Uganda and other Africa-region markets can use the appropriate FourTeck regional platform where applicable. Product availability, warranty handling, taxes, logistics and supported configurations can differ by destination.
For an end-of-life product, regional variation can be significant. One market may still have remaining units for replacement projects while another may only be able to offer a newer alternative. Buyers should therefore include the exact delivery country and project purpose in the inquiry. A request for one replacement lock in an established installation is different from a request to standardize 20 new doors across multiple sites.
Regional buyers can start from FourTeck.com or use relevant platforms such as FourTeck Kenya, FourTeck Uganda, FourTeck Africa and FourTeck Kuwait for regional inquiry direction.
Before requesting a regional quotation, provide quantity, delivery location, door details and acceptable alternatives. This helps the sourcing discussion reflect logistics and lifecycle realities rather than assuming one availability position applies to every country.
Other ZKTeco Options Buyers May Consider
Because the HBL100B/HBL200B family is marked EOL, related products should be considered as part of a new-project review. The options below are not presented as automatic replacements; each has its own functions, door requirements and management model. The right comparison depends on whether the buyer needs face recognition, fingerprint access, mobile administration, Wi-Fi or other connectivity, and whether the installation is one door or part of a larger property-security plan.
ZKTeco HBL200B
Same family reference for buyers comparing the paired HBL100B/HBL200B product line. Confirm biometric differences and current availability.
ZKTeco HBL400
Another hybrid biometric lock in ZKTeco’s smart-home-security portfolio. Review current specifications and door compatibility for new projects.
ZKTeco TL300B
A Bluetooth-enabled fingerprint-lock family that may suit buyers whose priority is fingerprint and mobile convenience rather than the same hybrid feature mix.
ZKTeco TL800
A newer smart-lock family listed under ZKTeco wireless IoT locks. It is worth evaluating when connected-property features are part of the requirement.
ZKTeco Smart Lock Range
Use a broader brand search when the project is flexible and a current model is preferred over matching a specific legacy product.
Access Control Solutions
For many doors, central policy and reporting may be more important than an individual smart-lock design. Compare access-control systems before standardization.
Why Business Buyers Contact FourTeck.com
A useful supplier conversation should reduce uncertainty before a purchase order is raised. FourTeck.com supports that process by helping business buyers translate a simple product inquiry into the information needed for a practical quotation. For a smart lock, that may include door dimensions, access methods, model lifecycle, power preferences, project quantity, delivery location and suitable alternatives.
Assistance for individual purchases, replacement requirements and project-based supply discussions.
Help identifying the details that should be confirmed before the smart lock is quoted.
Support comparing remaining EOL supply against newer options for a new deployment.
A structured quotation process based on quantity, configuration and delivery requirement.
Delivery planning based on the quoted source, project location and confirmed availability.
Clarification of warranty terms applicable to the specific source and quoted product.
This approach is particularly important for discontinued or end-of-life products. A buyer may need an exact replacement because an existing installation depends on it, or may simply have found an older model online while planning a new project. Those are different buying situations. FourTeck.com can help separate them, identify what needs to be verified and discuss current options without assuming that the older model is automatically the best answer.
Frequently Asked Questions
What is this ZKTeco smart lock used for?
It is used to control access to a compatible door through biometric and electronic authentication methods. Typical environments include offices, executive rooms, apartments, villas and selected managed-property entrances. The product is best considered for individual controlled doors where an integrated smart lock is appropriate rather than as a direct replacement for a multi-door enterprise access-control platform.
Does the HBL100B support fingerprint access?
Yes. ZKTeco regional documentation lists a semiconductor fingerprint sensor for the HBL100 version. The family also supports facial recognition. Because HBL100B and HBL200B are related but not identical, the exact model should be stated on the quote when fingerprint access is mandatory.
Is the product still current?
The current ZKTeco international listing marks the HBL100B/HBL200B family EOL. Buyers should therefore confirm current availability, warranty terms and replacement options before ordering. Existing installations may still need matching units, while new projects should compare current-generation alternatives before standardization.
What door thickness does it support?
ZKTeco specifies 30–60 mm as the standard door-thickness range. Buyers should also verify mortise compatibility, existing cut-outs, spindle position, handle clearance and opening direction. A door can be within the thickness range and still need modification if the existing lock preparation does not match.
How is the lock powered?
Manufacturer documentation lists a rechargeable lithium battery, with an eight-AA alkaline battery option. ZKTeco states more than 6,500 operations for lithium-battery use. Actual maintenance intervals depend on usage and battery condition, so the owner should establish a routine battery-check process.
Can FourTeck.com help with configuration?
Yes. FourTeck.com can help buyers identify the configuration information needed for a quote, including door thickness, mortise, opening direction, preferred authentication methods, battery expectations, quantity and delivery location. For an EOL model, the team can also discuss whether a current alternative should be considered.
Is delivery support available in the UAE?
FourTeck.com can support quotation and delivery coordination for UAE business inquiries. Availability and delivery timing depend on the product source, quantity and lifecycle status, so they should be confirmed in the quotation rather than assumed from an online product page.
Can businesses request multiple units?
Yes, buyers can request project quantities, but a multi-unit order should include a compatibility review before standardization. Confirm that all target doors are mechanically suitable, decide how users will be administered and consider whether a current model offers a better long-term supply path for a larger rollout.
How do I request a quotation?
Use the FourTeck.com contact page and provide the product model, quantity, delivery location, door thickness, opening direction, photos if available, preferred authentication methods and whether alternatives are acceptable. For replacement requests, include the old lock model and door-edge photo so mechanical compatibility can be reviewed more effectively.
Need Help Choosing the Right Smart Lock?
FourTeck.com can help you review current availability, door compatibility, authentication requirements, lifecycle alternatives, warranty guidance and delivery needs. Send the project quantity, door details and preferred access methods so the quotation can be based on the actual requirement.
