ZKTeco LH3000 Electronic Hotel Lock in Dubai, UAE
The ZKTeco LH3000 is a card-based electronic hotel lock built for hospitality environments where guest-room access needs to be straightforward for guests and manageable for front-desk or security teams. It uses 13.56 MHz MIFARE-1 RFID technology, supports ISO14443 Type-A cards, works with the ZKBiolock Hotel Lock System, and uses an American-standard mortise with five latches. For hotels, serviced apartments and accommodation projects, the practical value is not only the lock on the door: it is the ability to prepare a repeatable room-access process, maintain card-based permissions and review recent lock activity when required.
Request QuoteCheck UAE Availability
Quick Product Information
Buyer Decision Snapshot
For a busy hotel manager, project consultant or procurement team, the important decision is whether the lock fits the door, credential workflow and operating model of the property. The LH3000 is best evaluated as part of a room-access system rather than as a standalone piece of hardware.
Hotels, serviced apartments, guest accommodation and hospitality room-access projects using RFID cards.
A consistent MIFARE card workflow with software-based hotel lock management and recent transaction records.
Confirm door thickness, handing, mortise preparation, room quantity, card requirement and management software scope.
Replacement projects should verify existing door cut-outs and credential compatibility before assuming a direct swap.
Low-battery warning supports routine maintenance planning, but battery specifications should be confirmed with the supplied configuration.
FourTeck can review product fit, related accessories, quantity, delivery requirement and project quotation for UAE buyers.
Product Overview
Hotels need room access to be simple for guests without making administration difficult for staff. A conventional mechanical key can become operationally awkward when keys are lost, rooms are reassigned or housekeeping access must be controlled. An RFID hotel lock creates a more structured model by allowing the property to use encoded cards for guest and staff access. The LH3000 is designed around that hospitality workflow. Its 13.56 MHz MIFARE-1 technology reads compatible ISO14443 Type-A cards, while the ZKBiolock Hotel Lock System provides the management layer used to prepare and administer the hotel lock environment.
Mechanically, the lock uses an American-standard mortise with five latches and a 62.5 mm backset. That matters because hotel locks are not selected only by appearance or card technology. Door construction, thickness, existing mortise cut-out, handing and installation preparation all influence whether a model can be fitted cleanly. ZKTeco specifies a supported door thickness of 40 to 55 mm for the current global LH3000 listing. Buyers planning refurbishment should measure a representative set of doors before committing to a full property quantity, especially when the building has mixed door types or previous lock hardware.
For operations teams, two practical functions deserve attention. First, the lock can retain an audit trail of the latest 224 lock transactions. This can help with incident review, housekeeping queries or basic access accountability when the system is used correctly. Second, a low-battery warning provides an operational cue for maintenance. Neither feature removes the need for procedures: staff still need a schedule for battery replacement, card control, lost-card handling, room turnover and system administration.
For UAE hospitality projects, FourTeck.com can help buyers move from model selection to a quote-ready requirement. That process can include checking the lock model, door thickness, quantity, card type, management needs, accessory expectations, delivery location and installation scope. This is particularly useful for hotel openings, phased renovations, serviced-apartment projects and replacement programmes where the wrong mortise or credential assumption can create additional work after the hardware arrives.
Key Business Benefits
◆ Card-Based Guest Access
RFID cards are well suited to hospitality because access can be managed around guest stays and staff responsibilities instead of relying on a physical key for every room. The value is operational consistency: reception, housekeeping and management can work within a defined credential process that is easier to administer across many rooms.
◆ Hotel-Focused Management
Compatibility with the ZKBiolock Hotel Lock System gives the LH3000 a management context designed for hotel locks. For buyers, this is important because a successful deployment depends on the complete operating workflow, including card issuing, room assignments, administrative permissions and staff training.
◆ Recent Transaction Visibility
The lock can hold the latest 224 transaction records. In practice, recent activity information can support basic investigation and accountability when a property needs to review who used a credential at a room. Buyers should plan who is permitted to retrieve or review this information and how records are handled.
◆ Maintenance Awareness
A low-battery warning helps staff identify when a lock needs battery attention before normal operation is affected. For a hotel with many rooms, this can support a preventive maintenance routine. Battery type, expected service interval and replacement procedure should be confirmed for the supplied setup.
◆ Robust Door Hardware Format
The American-standard five-latch mortise and stainless-steel housing are designed for a hospitality door environment where hardware is used repeatedly. Correct installation remains essential. A well-planned template, door preparation and installer handover can be as important as the lock specification itself.
◆ Repeatable Room Standard
Using one model across a defined set of compatible room doors can simplify spare planning, staff familiarity and future maintenance. Procurement teams should still confirm that every door group matches the thickness and mortise requirements before standardising the complete property.
The strongest business case appears when the lock, cards, software process and door preparation are treated as one coordinated system. A property can then build a repeatable operating method rather than buying individual locks without a clear management plan.
Product Highlights
Several confirmed technical points define how this model fits a hospitality access project. Buyers should use these as a starting point for system design rather than as a substitute for door measurement and site assessment.
Designed for compatible contactless hotel credentials based on ISO14443 Type-A cards.
Uses an American-standard mortise format that must match the prepared door and installation template.
A critical mechanical dimension to verify when replacing existing hotel locks or preparing new doors.
Provides a recent activity trail that can support operational review and access accountability.
Creates a maintenance cue so staff can plan battery attention instead of waiting for a room-access issue.
A neutral hospitality finish intended to suit many guest-room door styles.
The official product information specifies the ZKBiolock Hotel Lock System, ISO14443 Type-A S70 4KB / S50 1KB cards, a 0-45 °C operating range, 40-55 mm door thickness, 3 kg net weight and 410 × 218 × 145 mm package dimensions. Buyers should confirm the supplied package, encoder or card requirements, lock handing and any project-specific accessories during quotation because these items can differ by deployment and source.
Technical Specifications
| Specification | ZKTeco LH3000 Detail | Buyer Note |
|---|---|---|
| Product Type | RFID hotel lock | Designed for hospitality door access workflows |
| RFID Technology | 13.56 MHz MIFARE-1 | Confirm credential strategy for new or replacement projects |
| Card Type | ISO14443 RFID Type-A, S70 4KB / S50 1KB | Use compatible hotel cards and management workflow |
| Management Software | ZKBiolock Hotel Lock System | Confirm software, card encoder and workstation scope |
| Mortise | American standard with 5 latches | Door preparation must match installation requirements |
| Backset | 62.5 mm | Important for replacement and renovation projects |
| Door Thickness | 40-55 mm | Measure representative doors before bulk order |
| Audit Trail | Latest 224 lock transactions | Useful for recent activity review |
| Battery Alert | Low-battery warning beeps | Include battery checks in maintenance procedure |
| Operating Temperature | 0-45 °C | Evaluate indoor environment against stated range |
| Housing | Stainless steel, silver finish | Confirm finish preference for refurbishment work |
| Package Dimensions | 410 × 218 × 145 mm | Vendor-published package dimension |
| Net Weight | 3 kg | Vendor-published value |
When choosing the correct configuration, begin with the door rather than the software. Measure thickness and verify the mortise and backset against the installation template. Then define how many guest rooms, staff-only doors and spare units the project requires. Next, decide how cards will be issued and managed. A hotel deployment normally needs a clear reception workflow, suitable credentials and access to the appropriate lock management tools. Replacement projects should also document the current system so the team knows whether existing cards, encoders or software can be retained; do not assume interoperability without confirmation. Finally, clarify the delivery batch, installation responsibility, testing process and maintenance ownership so the hardware is supported by a practical operating plan after handover.
Configuration and Buyer Guidance
A hotel lock quotation becomes much more accurate when the buyer provides more than a model name. The LH3000 has clearly stated mechanical and credential requirements, and those should be matched to the property before quantities are finalised. The following checklist helps project teams reduce compatibility surprises.
Separate guest rooms, staff areas, test doors and spare-unit planning. A pilot installation can be useful before a large retrofit.
Record door thickness and existing mortise preparation. The published thickness range is 40-55 mm and the backset is 62.5 mm.
The lock supports ISO14443 RFID Type-A S70 4KB / S50 1KB cards. Confirm card sourcing and issuing workflow.
Plan for the ZKBiolock Hotel Lock System and confirm any encoder, workstation or setup requirements in the quoted scope.
Clarify door preparation, lock fitting, card testing, room numbering, acceptance testing and user handover responsibilities.
Define battery checks, spare locks, lost-card procedures, access-log handling and escalation steps before the property goes live.
Before requesting a quote, send FourTeck the number of room doors, sample door thickness, whether the project is new-build or replacement, required finish, existing credential system if any, expected software scope, delivery location and desired project timing. This helps the sales team focus the quotation on a complete operating requirement rather than a bare lock quantity.
Ideal Business Use Cases
The LH3000 is relevant where room access is issued through hotel-style RFID credentials and where the doors match the supported hardware format. It is not a universal access-control reader for every office door; its strength is a hospitality-oriented workflow.
Hotel Guest Rooms
A hotel can use a consistent RFID lock model across compatible rooms so front-desk staff can issue cards within the defined hotel-lock process. This is useful for properties that want to move away from mechanical keys or refresh an older card-lock installation.
Serviced Apartments
Serviced accommodation often has hotel-like check-in and housekeeping requirements. A managed card-based room lock can support temporary guest access while giving operations teams a repeatable process for room turnover.
Boutique Hospitality Properties
Smaller hotels and guest properties can benefit from a professional electronic room-lock workflow without treating every door as a separate access-control project. The deployment should still include card issuing, staff procedures and maintenance planning.
Room Refurbishment Projects
A renovation may include replacing locks while doors and interiors are being upgraded. In this case, the mortise, backset and door thickness should be verified early so carpentry and hardware preparation can be coordinated before final installation.
New Hospitality Fit-Outs
For new properties, the lock can be considered while door specifications are still being finalised. Early coordination between the door supplier, lock installer, interior contractor and hotel operations team can reduce last-minute changes.
Phased Replacement Programmes
Properties replacing older locks over several stages should test a sample door and document any differences between floors, wings or room types. A controlled pilot helps procurement understand whether the same preparation applies across the full estate.
For every use case, buyer suitability depends on the physical door, required credential process and management setup. FourTeck can help convert those practical details into a product and accessory requirement before ordering.
ZKTeco LH3000 RFID Guest Access Workflow
The core feature of the LH3000 is its 13.56 MHz MIFARE-1 credential technology. In a hotel environment, this matters because the lock is part of a wider process that begins at reception. A guest is assigned a room, a compatible card is prepared through the hotel-lock management process, and the card is then used at the room door. The advantage of this approach is not simply contactless convenience. It gives the property a structured way to manage temporary room access and staff credentials without depending on a permanent mechanical key for normal daily use.
For procurement teams, the important detail is card compatibility. ZKTeco publishes support for ISO14443 RFID Type-A, including S70 4KB and S50 1KB cards. A buyer should not assume that any card carrying the same frequency will automatically work with an existing hotel system. Credential format, encoding process, software configuration and installed lock environment should be checked together. This is especially important when a property already has staff cards, lift-access cards, energy-saving switches or another access platform and hopes to use one credential across several functions.
A good deployment plan documents who can issue cards, how lost cards are handled, what happens at checkout, how staff cards are controlled, and how spare credentials are secured. This operational discipline turns the RFID feature into a business process rather than an isolated technical function. FourTeck can help buyers prepare a quotation request that includes the room-lock quantity and the supporting credential-management requirements instead of sourcing locks alone.
ZKTeco LH3000 Mortise, Door Fit and Installation Planning
Electronic hotel locks combine electronics with mechanical door hardware, which means installation quality has a direct effect on daily usability. The LH3000 uses an American-standard mortise with five latches and a 62.5 mm backset. ZKTeco also specifies a 40-55 mm door-thickness range on its current global product page. These values should be checked against the actual door construction before a project quantity is approved.
In a new-build hotel, coordination can begin before the doors are manufactured or delivered. The architect, door supplier, joinery contractor and access-control installer can align the lock template with the door set. In a renovation, the challenge is different: existing doors may already have cut-outs from an older lock. Even when the new lock looks similar on the surface, the internal mortise, spindle position, screw locations or handle preparation may not match. A sample installation therefore provides valuable evidence before a full replacement order.
Door handing and the direction in which the room door opens should also be part of the survey. The quoted scope should state whether the installer is responsible for adapting existing doors, whether finishing work is required after removal of old hardware, and how completed locks will be function-tested. A property with several door types should group doors by type and test each group.
This mechanical planning protects the project budget. It reduces the risk of discovering after delivery that additional carpentry, replacement doors or different lock hardware is required. FourTeck can help the buyer document the model and key dimensions during the quotation stage, while final fit should be confirmed by the responsible installer or project team against the site condition and installation documentation.
ZKTeco LH3000 Audit Trail and Maintenance Readiness
Hospitality access is not only about opening the room door. When a guest reports a concern or an operations manager needs to understand recent activity, the ability to review lock events can be useful. ZKTeco states that the LH3000 can record the latest 224 lock transactions. This is a limited recent-history function rather than an unlimited central archive, so properties should set realistic expectations about how the information will be used and retained.
The audit trail has practical value when it is supported by clear administrative controls. Staff should know who is permitted to retrieve records, how credentials are assigned to employees, and how access data is handled according to company policy. The lock should not be treated as a substitute for a complete security investigation process, but recent transaction information can become one useful data point when reviewing an incident or access question.
Maintenance is equally important. The model provides warning beeps when battery power becomes low. In a hotel, a warning is only useful if the property has a response procedure. Engineering or facilities teams should define who checks batteries, how replacement stock is stored, how completed maintenance is recorded and how guest disruption is minimised. The exact battery type and expected service life should be confirmed for the supplied configuration rather than assumed from another regional listing.
Procurement teams should also consider spare locks, spare cards, tools, installation documentation and staff training as part of the lifecycle plan. By asking these questions before purchase, the property creates a system that is easier to support after installation and reduces dependence on emergency fixes.
What Should Hospitality Buyers Know Before Choosing This Lock?
The questions below address the practical points hotel owners, consultants, facility teams and procurement staff often need to resolve before turning a model number into a working room-access solution. Each answer focuses on fit, deployment and operating requirements rather than simply repeating the specification table.
Is this lock suitable for a hotel replacing mechanical keys?
Yes, when the property wants a hotel-style RFID card workflow and the doors match the hardware requirements. The important step is to plan the complete process: compatible cards, management software, room setup, staff procedures and installation. A pilot on one representative door can help confirm the mechanical fit before a large conversion.
Can it be used for a serviced apartment project?
It can fit serviced accommodation where access is managed in a hotel-like way through compatible RFID cards. Buyers should consider how check-in, housekeeping and maintenance credentials will be issued. If the property instead needs cloud-connected mobile access or online central control, another lock architecture may be more appropriate and should be evaluated separately.
Will it fit an existing hotel room door?
Only after the door is checked. The published door-thickness range is 40-55 mm, and the lock uses a 62.5 mm backset with an American-standard five-latch mortise. Existing cut-outs from another lock may not align. Measure the door and compare the installation template before treating the model as a direct replacement.
Can the hotel reuse its current RFID cards?
Do not assume so. The lock supports ISO14443 RFID Type-A S70 4KB and S50 1KB cards, but practical reuse depends on the existing card technology, encoding method and management platform. If a hotel wants one card to work with rooms, lifts or other services, the complete credential architecture should be reviewed before purchase.
What software should be planned with the lock?
ZKTeco identifies the ZKBiolock Hotel Lock System for the LH3000. Buyers should confirm the exact software package, installation method, encoder requirements and workstation responsibility included in the quotation. A hotel should also nominate administrators and define card-issuing procedures before the system is handed to daily operations staff.
How useful is the 224-event audit trail?
It provides a recent record of lock transactions that can support basic access review. Because the stated capacity covers the latest 224 transactions, it should not be viewed as unlimited long-term storage. Hotels should establish when records might be retrieved, who has authority to review them and how any access data is handled.
What should be planned for batteries and maintenance?
The lock provides low-battery warning beeps, which can support preventive maintenance. Confirm the supplied battery requirements with the chosen package, then create a routine for inspection, replacement and spare stock. For larger properties, maintenance responsibility should be assigned to a named team so alerts are acted on before room access is affected.
What should a refurbishment project test first?
Test a representative door from each door type or building section. Check thickness, mortise alignment, backset, handle operation, door closure and the appearance after old hardware is removed. Then verify card issuing and normal guest operation. This reduces the risk of buying a full batch before discovering that carpentry or door modifications are required.
Which project details help FourTeck quote accurately?
Share the room count, spare quantity, door thickness, project type, existing lock model if replacing, required card quantity, software or encoder requirement, delivery location and target schedule. If installation is needed, include site readiness and whether old locks must be removed. These details allow the quotation to address the working system rather than locks alone.
Business Requirements to Match Before You Buy
For a hotel moving from keys to cards
This model can support a structured RFID room-access process when the hotel is prepared to operate compatible cards and lock-management software. The project should include reception workflow design, staff permissions and a maintenance plan rather than treating the hardware as a simple key replacement.
For a room renovation with existing doors
Buyers replacing older locks should confirm door thickness, backset and mortise cut-outs before ordering. A successful pilot can show whether the new lock covers old fixing marks and whether additional carpentry or finishing work is required.
For properties that need recent access review
The latest 224 transaction records can support limited recent-activity review. Hotels should define who can retrieve the information and should not assume the lock provides unlimited central history. Operational policy is needed around credential accountability and access-data handling.
For teams standardising many guest rooms
Standardisation can simplify spares and training when the doors are genuinely compatible. Survey different room types first, then define a consistent lock, card and management package. Procurement should also include a sensible spare quantity based on the property’s maintenance strategy.
For projects with existing RFID systems
Compatibility must be reviewed rather than assumed. The published card family gives an important reference, but encoding, software and cross-system use need confirmation. This is especially relevant when the property wants a single credential for rooms and other controlled services.
For procurement needing a complete quote
Ask for clarity on locks, cards, management tools, installation, delivery, testing, warranty guidance and any optional accessories. A complete scope helps finance teams compare proposals on the same basis and reduces surprises after purchase.
What Buyers Should Check Before Purchase
Electronic hotel lock projects can go wrong when the decision is based only on the model number or front-panel appearance. The lock must fit the physical door, the credential technology must match the planned operating method, and the supporting management tools must be included in the project scope. Before requesting a quotation, buyers should confirm both the technical fit and the day-to-day process that will be used by reception, housekeeping, engineering and security teams.
Correct Model and Door Fit
Verify the 40-55 mm door-thickness requirement, 62.5 mm backset and five-latch mortise against a real door. For retrofits, compare the installation template with the existing cut-out and confirm whether cosmetic finishing will be needed.
Credential and Software Fit
Confirm the ISO14443 Type-A card requirement and the planned ZKBiolock Hotel Lock System deployment. If the property has existing cards or access platforms, test compatibility rather than relying on frequency alone.
Availability and Warranty
Ask for current supply status, lead time, warranty terms and claim process for the quoted source. Project quantities may require staged delivery. Do not assume the warranty or availability shown by another reseller applies to the FourTeck quotation.
Accessories and Project Scope
Clarify cards, encoder or issuing device, software, batteries, keys, spare locks, tools and any other accessories required for operation. Scope should also state whether installation, removal of old locks and testing are included.
Operations and Training
Determine who will issue guest cards, create staff credentials, respond to low-battery alerts, review audit events and maintain spare cards. A short documented handover can reduce future errors when staff change.
Quote Preparation
Provide room quantity, door details, existing system information, credential requirement, software needs, delivery location and target timing. Clear inputs make it easier to compare the complete project cost instead of only the unit price of each lock.
Long-term cost should include more than the initial hardware. Consider spare cards, replacement batteries, maintenance labour, possible door modification, software workstation needs, training and future replacement stock. These items are not necessarily supplied with every quotation, but acknowledging them early gives finance and operations teams a more realistic view of the room-access lifecycle.
UAE Availability and Service Support
FourTeck.com supports ZKTeco LH3000 enquiries for hospitality and accommodation projects in Dubai and across the UAE. Support can include model verification, project quantity review, door-fit questions, card and software planning, quotation assistance, delivery coordination and warranty guidance based on the supplied source and project scope.
Availability can vary with order quantity, supplier status and the exact package required. For a small replacement order, the requirement may be straightforward. A hotel opening or refurbishment can involve dozens or hundreds of room doors, and those projects benefit from earlier planning because delivery batches, installation sequencing and credential preparation need to align with the construction or operations schedule.
When asking FourTeck for a quote, include the room count, location, door information, whether the project is new or replacement, and the required management scope. If you need related access-control planning, explore the FourTeck CCTV and access control solutions page for broader system guidance.
UAE City Coverage for Hospitality Lock Projects
Businesses and hospitality project teams in Dubai, Abu Dhabi, Sharjah and Ajman can contact FourTeck.com for product availability, configuration guidance and quotation assistance. A city location by itself does not determine the right lock package; the more important factors are the property type, room quantity, door preparation, card-management requirement, delivery schedule and installation responsibility. For multi-property operators, FourTeck can also help organise the requirement by site so each location follows a consistent model and accessory plan where appropriate. Buyers should provide the final delivery address during quotation so logistics can be reviewed against the actual order quantity and project timing.
Regional Availability Across GCC and Africa
FourTeck.com also supports business technology inquiries across selected GCC and Africa markets through regional inquiry channels. Hospitality groups, property operators and project contractors in Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Kenya, Uganda and other regional locations can share their requirements for hotel locks and related access-control systems. Availability, shipment method, warranty handling and project scope can vary by country and supplier source, so these details are confirmed during the quotation process.
Regional hotel projects often benefit from standardisation. If a group operates several properties, it may want consistent room-lock models, credential procedures and spare-parts planning across sites. That approach can simplify training, but it should only be adopted after confirming that door specifications and local project requirements are compatible. For country-specific inquiries, buyers can visit FourTeck Kenya, FourTeck Uganda, FourTeck Africa or FourTeck Kuwait.
For cross-border supply, share the destination country, project quantity, desired delivery schedule and whether the requirement includes cards, software-related accessories or installation services. FourTeck can then advise on the next quotation step without assuming that local stock or identical service conditions apply in every market.
Other Options Buyers May Consider
ZKTeco offers other hotel and apartment lock families, including electronic and wireless models. The best alternative depends on whether the project needs the same RFID workflow, a different lock design, wireless management features or a newer room-access architecture. Rather than choosing by model number alone, compare door compatibility, credential method, software platform and operating requirements.
ZKTeco LH4000
Consider when evaluating another electronic hotel lock in the ZKTeco hospitality family. Confirm current specifications and door fit.
ZKTeco LH6500
A related hotel-lock model to review when project design or mechanical requirements differ from the LH3000.
ZKTeco LH6800
Suitable for comparison within the same broad hotel-lock category when a buyer is assessing alternative designs or current availability.
ZKTeco ZL500
A wireless hotel-lock family option for projects that want to investigate a different management architecture.
Dinstar DP85U Door Intercom
For controlled entrances that need SIP communication rather than guest-room hotel locking, this is a different category of door-access product.
FourTeck can help buyers decide whether to stay with a conventional RFID hotel-lock workflow or evaluate a wireless alternative. The comparison should focus on the property’s operating model, door condition, credential strategy and management expectations rather than on appearance alone.
Why Business Buyers Contact FourTeck
A hotel lock project crosses several practical disciplines: procurement, door hardware, access credentials, software administration, installation and ongoing maintenance. FourTeck’s role is to help business buyers organise these requirements before the order is placed, reducing the chance that a product is selected only because its model number is familiar or its unit price looks attractive.
Help with product sourcing and project quantities based on the buyer’s actual requirement.
Review door, credential, software and accessory considerations before quotation.
Build a clearer scope for finance approval, tender comparison or project purchasing.
Review delivery location and quantity during quotation without assuming a fixed stock status.
Clarify the warranty terms that apply to the quoted source and product package.
Discuss alternative locks or access solutions when the original model does not fit the door or management requirement.
This approach is useful for independent hotels, serviced-apartment operators, hospitality groups, contractors, consultants and facility managers who want the purchase to fit the operating environment. Visit FourTeck.com to explore broader business technology support, or use the contact page to submit a room-lock requirement.
Frequently Asked Questions
What is the ZKTeco LH3000 used for?
It is an RFID electronic hotel lock intended for hospitality room-access applications. It uses 13.56 MHz MIFARE-1 cards and works with the ZKBiolock Hotel Lock System. Typical projects include hotel rooms, serviced apartments and accommodation environments where guest and staff access is managed through compatible cards rather than normal mechanical keys.
Which card types does the lock support?
ZKTeco specifies ISO14443 RFID Type-A credentials, including S70 4KB and S50 1KB cards. If you already use hotel cards, do not assume they can be reused without testing. Card compatibility depends on more than frequency, so the credential, encoding process and management environment should be reviewed together.
What door thickness is supported?
The current global product information lists a 40-55 mm door-thickness range. The lock also uses a 62.5 mm backset and an American-standard five-latch mortise. For a retrofit, measure the real door and compare the installation template before ordering a full quantity because existing cut-outs may differ.
Does the LH3000 keep access records?
Yes. ZKTeco states that the lock can record the latest 224 lock transactions. This can support recent activity review when required. Because the capacity is limited to the latest records, hotels should treat it as a recent audit function and establish appropriate procedures for who can review access information.
Does it warn staff when battery power is low?
Yes. A low-battery warning beep is listed among the model’s features. Hotels should combine that warning with a preventive maintenance routine so engineering staff know how to respond. Confirm the battery type and supplied battery requirements for the specific package during quotation.
Is the lock available in Dubai and the UAE?
FourTeck can assist with current availability inquiries for Dubai and UAE projects. Actual supply depends on quantity, supplier status and the package requested. Share the room count and required accessories so the quotation can reflect the project rather than relying on a generic stock assumption.
Can FourTeck help with configuration planning?
Yes. FourTeck can review the requested model, door thickness, quantity, credential needs, software scope, related accessories and delivery requirement before preparing a quotation. Final installation fit should be confirmed against the real doors and the relevant installation documentation.
Can businesses request a bulk project quotation?
Yes. Hotels, serviced-apartment operators, contractors and project teams can request bulk supply guidance. Provide the quantity, delivery location, project stage, door information and required supporting items. For larger installations, it is sensible to validate a sample door before finalising the full quantity.
What should I send when requesting a quote?
Send the number of locks, sample door thickness, whether the project is new-build or replacement, existing lock information if applicable, card quantity, software or encoder requirement, delivery address and project timing. If installation is required, also mention whether old hardware must be removed or doors modified.
Need Help Planning Your Hotel Lock Requirement?
FourTeck.com can help you review model suitability, door requirements, RFID card planning, related accessories, current availability, warranty guidance and delivery requirements. Share the room count and project details so the quotation can be built around the actual hospitality deployment.
