ZKTeco Mars-S100 Swing Barrier Turnstile in Dubai, UAE
The Mars-S100 is a compact, single-lane swing barrier for managed pedestrian entrances where floor space, credential flexibility, smooth passage and emergency egress all matter. Its 600 mm cabinet length, brushless drive, four-pair infrared sensing, optional wider passage and access-control integration make it a practical choice for reception areas, office lobbies, institutions and other indoor sites that need a controlled flow of authorized users without installing a bulky gate system.
✓ Access Reader Planning
✓ UAE Delivery Coordination
✓ Quote Assistance
Quick Product Information
ZKTeco
Mars-S100
Single-lane swing barrier turnstile
Indoor installation
660 mm; optional 900 mm
RFID, fingerprint, palm, QR or face, depending on selected equipment
C3-200 and InBio260 Pro are vendor-recommended options; other choices are fit-dependent
Infrared anti-clamping, mechanical clutch and power-loss emergency opening
Contact FourTeck.com for current options
Dubai and wider UAE inquiry support
Confirm supplied-unit warranty terms at quotation stage
Share site layout, lane count, credentials and integration needs
Fast Decision Snapshot for Project Buyers
A turnstile project is easier to specify when the buying team separates the physical lane requirement from the credential and management requirement. The Mars-S100 provides the pedestrian barrier and sensing platform; the final access experience depends on the reader, controller, software, mounting method and site preparation selected for the project.
Managed indoor entrances that need a compact single controlled lane with modern credential options.
A short 600 mm cabinet helps projects use reception and lobby space efficiently while retaining automated passage.
Confirm the number of lanes, 660 or 900 mm passage, credential method, controller, fire input and floor condition.
The vendor describes this model as a low-security gate, so it should not be mistaken for a high-security perimeter turnstile.
Multi-lane layouts should be planned as a complete entrance system, including clearances, reader positions, queue flow and emergency paths.
FourTeck can review product fit, related access-control components, installation scope and purchasing information before quotation.
Product Overview
The Mars-S100 is designed for organizations that want a physical pedestrian gate to work as part of an electronic access-control process. In normal operation the barrier remains closed to discourage uncontrolled passage. When the connected access system validates an approved credential, the acrylic wing swings open so the person can pass through the lane. This turns a reception entrance, staff access point or controlled interior corridor into a more structured entry zone than a simple reader beside an unrestricted doorway.
Its biggest physical advantage is the compact cabinet. At 600 mm long and 120 mm wide, the unit can fit layouts where a deeper speed-gate body would consume too much lobby space. The standard pedestrian passage is 660 mm, while a 900 mm option can be considered where the project must accommodate luggage, a trolley or a wider route. Because the wider lane changes the physical planning of the entrance, buyers should confirm clear opening dimensions, neighboring lanes, wall distances and walking direction before fixing the floor position.
The gate itself is only one layer of the system. ZKTeco lists under-mount options for RFID, fingerprint, palm and QR verification and surface-mount facial recognition options. The company also recommends C3-200 and InBio260 Pro controllers, while noting that other controllers depend on whether their dimensions fit. Supported management software can include ZKBio CVAccess or ZKBio CVSecurity depending on the equipped controller. This means procurement teams should avoid ordering the barrier first and deciding the control architecture later. Reader type, controller, software, user enrollment, access rules, cabling and power should be planned together.
For UAE projects, this model is most relevant when the site needs an indoor controlled entrance with moderate security expectations, smooth credential-driven flow and clear emergency egress behavior. FourTeck.com can help buyers turn a broad requirement such as “we need a turnstile at reception” into a more complete scope covering lane quantity, identification method, access-controller choice, interface requirements, power, floor preparation and installation responsibilities. That preparation reduces the risk of receiving a gate that is physically suitable but incomplete for the intended access workflow.
Key Business Benefits
◆ Compact Entrance Planning
A 600 mm cabinet length gives architects, facilities teams and installers more flexibility in lobbies where circulation space is valuable. A smaller cabinet can make it easier to preserve a clean reception path, maintain queue space and position more than one lane without turning the entrance into a heavy mechanical zone. Buyers should still validate all site dimensions before installation.
◆ Flexible Credential Experience
The platform can be paired with several credential types, including RFID, QR, fingerprint, palm or face equipment depending on the selected configuration. This helps a business match the lane to how users already identify themselves rather than forcing one authentication method. It also lets procurement separate permanent staff workflows from visitor or temporary-access workflows when designing the wider system.
◆ Controlled Pedestrian Flow
A normally closed automated barrier creates a clear physical checkpoint. Authorized users receive an obvious passage event after successful verification, while unverified pedestrians do not simply walk through an open corridor. In offices and institutional environments this can support better entry discipline, clearer reception procedures and more predictable movement through controlled areas.
◆ Emergency Egress Consideration
The design includes automatic barrier opening when power is lost and accepts a voltage-free fire alarm input. That behavior is important because access control must never be considered only in normal operating conditions. The final installation still needs to follow the building’s approved life-safety design, local requirements and the consultant’s emergency-exit strategy.
◆ Sensing Around the Passage
Four pairs of infrared sensors are provided to help detect pedestrians and support anti-clamping behavior. For buyers, this means the gate is designed around actual person movement rather than a simple timed motor action. Correct sensor performance depends on proper installation, alignment, configuration and routine maintenance, especially in busy entry areas.
◆ Durable Drive Architecture
ZKTeco specifies a DC brushless motor and an MCBF rating of five million cycles. For a facilities team, these figures are useful when assessing whether the mechanism is intended for repetitive automated movement. They do not remove the need for preventive inspection, but they give procurement a clearer basis for comparing gate mechanisms and expected operational duty.
◆ Easier System-Level Procurement
Because the gate has defined controller, reader, software, power and fire-input considerations, buyers can create a structured bill of materials instead of treating the turnstile as an isolated item. FourTeck can help review those surrounding requirements so the quotation reflects the entrance system the business expects to deploy, including integration and installation items where applicable.
Product Highlights That Matter to Buyers
The ZKTeco Mars-S100 Swing Barrier Turnstile combines a narrow cabinet, swing movement and multiple integration choices in a form intended for indoor pedestrian control. The following points are especially useful when preparing a purchase specification because they affect the physical site, day-to-day user experience and connected access-control architecture.
Useful for reception and lobby layouts where deeper gate cabinets would consume more floor area.
Lets planners choose between a standard pedestrian lane and a wider route for suitable access scenarios.
The manufacturer specifies 0.8 seconds per opening or closing movement; overall passage rate depends on credential method and user behavior.
Vendor figures list up to 30 people per minute for RFID or QR, 20 for fingerprint or palm, and 15 for face verification.
The standard chassis uses powder-coated cold-rolled steel, while stainless-steel material is listed as an option.
ZKBio CVAccess or ZKBio CVSecurity support depends on the controller fitted, so software expectations should be confirmed before ordering.
A particularly important specification is the vendor’s “low” security-level classification. This does not make the product unsuitable; it clarifies its role. It is better considered an elegant controlled-flow gate for managed indoor premises than a substitute for a full-height anti-climb barrier or other high-security perimeter solution. Projects with elevated physical-security requirements should compare alternative entrance-control types before final selection.
Technical Specifications
| Specification | Mars-S100 Detail |
|---|---|
| Brand / Model | ZKTeco / Mars-S100 |
| Lane Type | Single lane |
| Barrier Movement | Swing |
| Lane Width | 660 mm standard; 900 mm optional |
| Cabinet Dimensions | 600 × 120 × 1040 mm (L × W × H) |
| Motor | DC brushless motor |
| Movement Speed / Accuracy | 0.8 seconds per opening/closing movement; ±2 degrees |
| Barrier Material | Acrylic, 295 × 630 mm standard; 425 × 630 mm optional |
| Chassis / Lid | Cold-rolled steel SPCC (GB700) with optional SUS304 stainless steel; chassis thickness listed as 1.2 mm |
| Color | White standard; silver-gray optional |
| Infrared Sensors | 4 pairs, high and low position |
| Visual / Audio Indicators | Green/red visual status and internal buzzer |
| Authentication Options | Under-mount fingerprint, RFID, palm or QR options; surface-mount facial-recognition options |
| Credential Hardware Examples | ProID/KR RFID readers, FR1200/FR1500 fingerprint, ProFace X/G4 Pro face, Omni AC30 palm; final compatibility is configuration dependent |
| Recommended Controllers | C3-200 and InBio260 Pro; other controller choices depend on physical fit |
| Motherboard Communication | 1 fire-alarm relay port and 1 RS485 port |
| Flow Rate | RFID/QR: up to 30 passengers/min; fingerprint/palm: 20/min; face: 15/min |
| Power Supply | 110/220 V AC at 50–60 Hz; DC 24 V |
| Power Rating | 22 VA standby; 50 VA operation |
| Noise Level | Less than 60 dB |
| MCBF | 5 million |
| Operating Conditions | -20°C to 70°C; 0% to 85% RH, non-condensing |
| Application Environment | Indoor |
| Safety / Security Functions | Infrared anti-clamping, mechanical anti-clamping/clutch, power-off fail-safe and emergency escape function |
| Software | ZKBio CVAccess / ZKBio CVSecurity depending on equipped controller |
| Certifications Listed by Vendor | CE, FCC, ISO9001 |
| Security Level | Low |
| Site Preparation | Flat, level finished floor; optional base plate for unfinished floor |
| Product Delivery | Pre-assembled |
When choosing a configuration, start with the lane and access workflow. A normal staff entrance using cards may prioritize fast RFID verification and a standard passage. A reception environment that accepts visitor QR codes may need a QR reader positioned for intuitive presentation. A wider lane may be more appropriate when the route is expected to handle luggage or suitable trolley traffic. Biometric options require extra attention to reader mounting, enrollment, privacy processes and the controller/software combination. Power and fire-alarm interfacing should be reviewed with the site’s electrical and life-safety teams. The table provides the product baseline, but the approved project drawing and final bill of materials should define what is actually supplied.
Configuration and Buyer Guidance
A successful swing-barrier purchase begins with a movement plan, not with the model number. Mark the intended entrance on the floor plan, note the direction of travel, identify reception furniture or walls that can restrict the approach, and decide how many independent lanes are required. If the site needs both standard pedestrian passage and a wider assisted route, document those lanes separately rather than assuming one opening size suits every user.
Choose card, QR, fingerprint, palm or face based on real operating procedures, not novelty. Visitor and employee workflows may differ.
Confirm door/reader capacity, physical mounting space, software support and the integration method before finalizing the hardware.
Use the standard lane only after checking the project’s accessibility, trolley, luggage and circulation requirements. The optional lane is 900 mm.
Coordinate the voltage-free fire signal, power-loss behavior and escape route with the approved building safety design.
The manufacturer calls for a flat and level finished floor. Cable paths, anchors and any base plate requirement should be planned before delivery.
If the site requires strong anti-climb or perimeter resistance, compare other turnstile types because this unit is classified as low security.
Before requesting a detailed quotation from FourTeck.com, share the site type, floor plan or opening measurements, number of lanes, preferred lane width, expected user flow, authentication method, existing ZKTeco controller or software information, fire-alarm interface requirement, cabinet finish preference and whether installation is part of the scope. Also identify any associated network cabling, power outlet, containment, UPS, visitor-management or enrollment requirement. A precise request helps the sales and technical teams distinguish the core gate from optional readers, controllers and installation materials, giving procurement a clearer basis for approval.
Ideal Business Use Cases
The Mars-S100 fits sites where pedestrian movement should be controlled but the entrance still needs to look open, modern and convenient. Because the manufacturer specifies indoor use and a low physical-security level, the strongest use cases are managed interior or sheltered-building entrance workflows rather than exposed perimeter security.
Corporate Reception and Staff Entry
A reception can use the gate to separate a public waiting area from an employee zone. Staff may authenticate with an approved credential while visitors follow a reception or temporary-access process. The compact cabinet helps preserve lobby appearance where space and presentation matter.
Business Buildings and Shared Offices
Multi-tenant environments can use controlled lanes at a common interior checkpoint when the access platform and user-management design support the required tenant groups. The project should define how temporary users, contractors and after-hours access will be handled.
Education and Institutional Entrances
Schools, training facilities or institutions may use credential-controlled swing barriers for selected indoor access points where orderly movement is needed. The design should consider peak arrival times, supervision, accessibility and emergency evacuation rather than relying only on nominal throughput figures.
Transport-Related Indoor Halls
ZKTeco positions the series for locations that can include busy terminals. In such projects the optional wider passage may be relevant for luggage or trolley movement. Queue design, lane quantity and the credential process will determine whether the selected layout can handle real peak demand.
Government and Administrative Facilities
Administrative buildings may require controlled separation between public reception space and staff-only areas. The gate can form part of that transition when the required risk level is appropriate and the access controller is integrated with approved credential-management procedures.
Commercial Campus Interior Zones
A campus can deploy multiple lanes at selected indoor entrances as part of a broader access system. For multi-lane planning, buyers should define how end cabinets, intermediate cabinets, wider lanes and reader positions interact rather than calculating quantity from pedestrian count alone.
These examples assume that the barrier’s low-security classification is acceptable for the application. Sites that need forced-entry resistance, outdoor weather exposure, anti-climb protection or controlled perimeter containment should evaluate a different gate category. The best product is the one whose physical behavior matches the security objective, not simply the model with the preferred appearance.
ZKTeco Mars-S100 Compact Lane Design and User Flow
The most distinctive engineering choice in the Mars-S100 is its short cabinet. A conventional entrance-control project can become difficult when long bodies consume too much of a reception area or leave insufficient space for queuing. With a 600 mm cabinet length, the gate gives designers another option for locations where the equipment must be present without dominating the room. That does not mean the total lane footprint is only 600 mm; the full installation still includes passage width, approach and exit space, neighboring gates, service clearance, reader reach and any nearby architectural features.
The standard 660 mm lane is intended for normal single-pedestrian use. The optional 900 mm width is significant because it changes who and what can comfortably pass through the gate. It can be considered for a person carrying luggage or pushing a suitable trolley, but project teams should not assume that “wider” automatically satisfies every accessibility code or local requirement. Accessibility and emergency-route compliance are building-design questions that must be checked against the approved project requirements.
User flow is also determined by authentication. ZKTeco publishes different flow rates for different credential methods: RFID or QR can reach a higher nominal rate than fingerprint, palm or face. This is logical because presenting a card or code often requires less interaction than biometric positioning and verification. A busy entrance therefore needs more than a barrier-speed calculation. The buyer should estimate peak arrivals, consider failed scans or unfamiliar visitors, decide whether reception support is nearby and provide enough space so people do not queue into lifts, doors or public circulation paths.
ZKTeco Mars-S100 Credential Integration and Access Control
A swing barrier does not decide who is authorized by itself. That decision comes from the access-control layer connected to it. ZKTeco supports several reader approaches for the series, including under-mount RFID, fingerprint, palm and QR options plus surface-mounted facial-recognition devices. This gives system designers flexibility, but it also creates a procurement responsibility: every selected reader must be checked for physical mounting, electrical connection, controller support and the user-management workflow that will operate it.
For a simple employee entrance, an RFID reader may provide a familiar and efficient process. A site that frequently issues temporary visitor passes may prefer QR verification as part of its visitor workflow. Fingerprint or palm authentication may suit organizations that want biometric identity checking, while facial recognition can provide a more contactless experience. The correct choice depends on company policy, user population, privacy requirements, environmental conditions and the existing access platform. It is not necessary to choose the most advanced credential if a simpler method is easier to administer reliably.
Controller selection is equally important. ZKTeco lists C3-200 and InBio260 Pro as recommended controller options and notes that other controllers depend on dimensional fit. The company also references ZKBio CVAccess and ZKBio CVSecurity software depending on the equipped controller. Buyers who already operate a ZKTeco environment should provide the exact controller and software version to FourTeck before quotation. Buyers starting a new project should define user count, number of controlled lanes, enrollment method, reporting needs and integration expectations so the proposed controller is appropriate for the larger access design.
ZKTeco Mars-S100 Safety, Emergency Behavior and Maintenance
Entrance-control equipment sits directly in the path of people, so safety behavior deserves the same attention as access permissions. The Mars-S100 includes four pairs of infrared sensors and both infrared and mechanical anti-clamping functions. The built-in mechanical clutch is intended to respond when the barrier is forced, helping protect the movement mechanism. These features support normal operational safety, but their effectiveness depends on the gate being anchored, aligned and configured correctly.
The emergency design is particularly important. ZKTeco specifies automatic barrier opening during power loss and provides a voltage-free contact input for a fire-alarm signal. This creates a fail-safe route in the scenarios the product is designed to handle. The installer still needs to connect and test that behavior in accordance with the building’s approved fire and life-safety system. A turnstile should never be installed with emergency operation treated as a future commissioning task; it should be included in the acceptance checklist from the beginning.
For maintenance planning, the manufacturer lists an MCBF value of five million and an MTTR of less than 60 minutes. Those numbers help indicate the product’s mechanical design target, but they are not a promise that a specific installation will run maintenance-free for a defined number of years. Dust, misalignment, misuse, repeated impacts, wiring conditions and changes made during renovations can all affect performance. Facilities teams should keep the area around the infrared sensors clean, check unusual noises or motion, confirm visual indicators, inspect physical anchoring and periodically test emergency release behavior under controlled service procedures.
The vendor lists this gate for indoor use. If the intended position is exposed to rain, direct outdoor conditions or an uncontrolled environment, the buyer should not rely on the operating-temperature range as proof of weather suitability. Environment rating and temperature range are separate considerations. FourTeck can help compare another entrance-control type when the site conditions fall outside the intended indoor deployment.
What Should You Know Before Choosing This Swing Barrier?
The questions below reflect how facilities managers, security teams, consultants and procurement staff typically evaluate a controlled entrance. Each answer focuses on fit, configuration and project preparation so the gate can be quoted as part of a complete access solution rather than as an isolated cabinet.
Is this gate suitable for a normal office reception?
Yes, when the reception needs a controlled indoor pedestrian lane and the project’s physical-security requirement matches the manufacturer’s low-security classification. Its compact cabinet can suit lobby planning, while card, QR or biometric options can support staff and visitor workflows. The buyer should still confirm queue space, accessibility, emergency routing and how reception staff will handle rejected or temporary credentials.
Should I choose the 660 mm or 900 mm lane?
Choose 660 mm for a standard pedestrian route only after checking the site’s required clear passage. Consider the optional 900 mm version when the planned lane must better accommodate luggage, suitable trolleys or a wider walking path. The final decision should come from the approved layout and accessibility requirements, because a wider product option is not a substitute for project-specific code review.
Which authentication method gives the fastest passage?
The manufacturer’s published figures show RFID and QR at up to 30 passengers per minute, compared with 20 for fingerprint or palm and 15 for face. Actual site flow can be lower because user familiarity, failed verification, visitor handling and queue behavior all affect throughput. Select the credential based on security and operating needs first, then size the lane count for peak traffic.
Can it work with an existing ZKTeco access-control system?
It can integrate with supported ZKTeco controllers and software, but compatibility should be checked against the exact equipment already installed. ZKTeco recommends C3-200 and InBio260 Pro controller options and lists ZKBio CVAccess or ZKBio CVSecurity depending on the equipped controller. Share controller model, software name, software version and reader details with FourTeck before ordering.
What must be prepared on site before installation?
Prepare a flat, level finished floor, confirmed anchor positions, cable routes, electrical supply, access-control wiring and the fire-alarm interface. The final drawing should also show approach space, exit space, neighboring gates and reader positions. If the floor is unfinished, ask whether the optional base-plate arrangement is required. Early coordination prevents civil and electrical changes after the gate arrives.
Can I use the Mars-S100 outdoors?
The manufacturer lists the application environment as indoor, so an exposed outdoor installation should not be assumed suitable. A broad operating-temperature range does not equal a weather or ingress-protection rating. If the gate location is exposed to rain, dust, direct sun or uncontrolled outdoor conditions, provide the site details so FourTeck can help review a product designed for that environment.
What should replace this model in a high-security entrance?
A high-security project should compare a different entrance-control category rather than trying to make a low-security swing gate perform like a perimeter barrier. Full-height turnstiles or other stronger physical-control systems may be more appropriate depending on risk, escape requirements and user flow. FourTeck can review the security objective and suggest suitable product categories before quotation.
Which accessories should be included in the quotation?
The list depends on configuration, but buyers commonly need to define the credential reader, controller, required software environment, communication wiring, power, fire-alarm interface, mounting or base-plate items, and installation materials. Multi-lane layouts may require additional gate components. Asking for a complete bill of materials is safer than comparing quotations that list only the core barrier cabinet.
What information gives FourTeck enough detail for an accurate quote?
Send the site location, entrance drawing or measurements, number of lanes, required lane width, daily and peak user flow, credential choice, existing controller/software details, preferred cabinet finish, fire-interface requirement, installation scope and desired project timeline. If you are replacing an older gate, also share photos and the existing cable or floor arrangement so compatibility questions can be reviewed early.
Business Requirements to Match Before You Buy
For a compact reception entrance
This model is worth considering when the project needs automated entry but a long speed-gate cabinet would consume too much lobby depth. Verify the full installed footprint, not just cabinet length.
For staff plus visitor credentials
The flexible reader options can support different identity methods. Define who uses cards, QR or biometrics and how temporary access is issued before selecting hardware.
For a wider assisted passage
Projects needing more clearance can evaluate the 900 mm option. Confirm accessibility and circulation requirements with the project consultant rather than choosing width from preference alone.
For a multi-lane rollout
Plan all lanes as one coordinated system, including reader positions, lane types, queue formation, emergency behavior, cable distribution and administrator workflow.
For an existing ZKTeco environment
Provide the current controller and software details so compatibility can be reviewed. Similar brand names do not guarantee every generation or component will connect as expected.
For a replacement project
Measure the existing footprint, photograph cable entry and floor anchors, and document reader and fire connections. Replacement effort depends on what can be reused safely and correctly.
What Buyers Should Check Before Purchase
A good quotation should answer more than “how much is the gate?” It should make clear which version is being supplied, what components are included and what work remains outside the hardware price. Start by checking the exact model and lane arrangement. Mars-S100 is the single-lane model, while related series configurations can use different structures for additional lanes. If your entrance requires several parallel passages, ask for a lane layout and itemized bill of materials rather than multiplying a single-unit price.
Configuration Fit
Confirm standard or 900 mm lane, cabinet finish, acrylic wing size, reader type, controller and software path. Request exact model references for optional components so procurement can compare equivalent quotations.
Compatibility Check
If there is an existing access system, provide controller, reader, software and network details. Confirm the fire-alarm interface and any third-party integration separately rather than assuming compatibility from brand alone.
Availability and Warranty
Ask for current lead time and warranty terms for the actual quoted configuration. Availability can change by finish, reader, controller and project quantity, so these points should be confirmed at quotation stage.
Installation Scope
Clarify who provides floor drilling, anchoring, electrical supply, containment, data cable, controller wiring, fire input, network configuration, software setup, user enrollment and final testing.
Operational Suitability
Check whether the site is truly indoor, whether the security level is adequate, how many people arrive during peak periods and whether a staffed reception is available to resolve failed credentials.
Quote Preparation
Provide drawings, photos, lane count, credential method, integration requirements, floor condition, location and quantity. Accurate project information allows FourTeck to identify missing accessories before a purchase order is issued.
Long-term cost should include more than the gate body. Consider reader replacement, controller support, software administration, user cards or enrollment, preventive maintenance, spare parts, onsite service and any civil work required when the entrance changes. For multi-site organizations, standardizing the same controller and credential approach across locations can simplify training and support, but only if the chosen platform suits every site.
If you are replacing an older swing barrier, do not assume the new cabinet will reuse the same anchor holes, cable entries or controller wiring. A pre-installation survey can reveal whether flooring needs repair, whether old power wiring is suitable and whether the new emergency interface can connect to the building system. FourTeck.com can help structure these checks before quotation so the purchase decision reflects the full project rather than only the equipment model.
UAE Availability and Service Support
FourTeck.com supports product inquiries for the Mars-S100 across Dubai and the UAE with help for product selection, configuration review, quotation preparation, related access-control components, delivery coordination and warranty guidance. Current availability can vary according to the requested cabinet material, lane configuration, reader option, controller, project quantity and supplier status. For that reason, FourTeck does not treat a model-page listing as confirmation that every possible configuration is immediately available.
For a quicker commercial response, include the quantity and configuration details with the inquiry. A request for “two turnstiles” may still be incomplete if the site needs a special lane width, face terminals, QR readers or an existing controller connection. Project buyers can also share photographs, drawings and an expected installation date so sourcing and technical questions can be handled together.
Warranty guidance should be tied to the actual supplied equipment and sales channel. Ask for written warranty terms in the quotation, especially when the solution contains a gate, controller and reader from different product families. If installation or commissioning support is required, define that scope separately so the team can plan labor, site access, safety coordination and testing.
Dubai, Abu Dhabi, Sharjah and Ajman Coverage
Businesses in Dubai, Abu Dhabi, Sharjah and Ajman can contact FourTeck.com for swing-barrier availability checks, bill-of-material review, access-reader selection, controller guidance and quotation support. For a single office entrance, the discussion may focus on one lane and a straightforward card or biometric workflow. Larger building or institutional projects may require several lanes, a wider passage, centralized access management and coordination with fire-alarm and building works. Delivery and project arrangements depend on the exact location, configuration and order scope, so buyers should share the installation address and site-access requirements when requesting a quotation.
GCC and Africa Regional Availability
FourTeck.com also supports business technology inquiries for selected GCC and Africa markets through regional inquiry channels. Organizations with projects in Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Kenya, Uganda and other Africa locations can ask for product sourcing guidance, configuration review and delivery possibilities based on the destination and current supplier arrangements. Cross-border availability, warranty handling, freight, local installation and import requirements can differ by country, so each project should be reviewed individually.
Regional buyers should provide the destination city and country, quantity, required credential method, lane width and whether the requirement is product supply only or part of a broader access-control rollout. Projects involving several sites benefit from a standardized bill of materials and a documented controller/software design, because it helps reduce differences between branches and simplifies future support.
For regional information, buyers can use FourTeck Kenya, FourTeck Uganda, FourTeck Africa or FourTeck Kuwait where relevant. Availability and technical scope remain subject to the selected configuration and local project conditions.
Other Options Buyers May Consider
A buyer should compare entrance-control products by physical-security objective, lane arrangement and user flow rather than by appearance alone. The following ZKTeco families are useful reference points when the Mars-S100 does not exactly match the project. Final model selection should be based on current manufacturer options and a site-specific requirement review.
Mars-S120
A related dual-lane arrangement in the same series for projects that need more than one passage and want a coordinated Mars family design.
ZKTeco Mars-S1000 Series
A different Mars-series platform to evaluate when the project calls for another gate format, feature set or entrance design.
ZKTeco SBTL Swing Barrier Family
Suitable to compare when a project needs a different cabinet style, lane arrangement or swing-barrier specification from the compact Mars format.
ZKTeco FBL Flap Barrier Family
A flap-barrier category can be considered where the design brief favors a different closure mechanism and pedestrian-lane appearance.
ZKTeco Full-Height Turnstiles
Worth evaluating when the physical-security objective is stronger than a low-security lobby gate and the site can accommodate a full-height mechanism.
FourTeck can help compare these categories without forcing a like-for-like decision where the intended use is different. Share whether the priority is compact appearance, wider access, anti-tailgating, higher physical resistance, outdoor suitability, throughput or integration with an existing controller. This makes alternative selection more meaningful than comparing model numbers alone.
Why Buyers Choose FourTeck.com for Access-Control Projects
Entrance-control procurement often spans several technical disciplines: physical gate hardware, access readers, controllers, software, network connectivity, electrical power, fire integration and civil installation. FourTeck approaches the requirement as a system so buyers can identify those dependencies before a purchase order is issued.
Help sourcing the specified model and surrounding technology components based on current availability.
Review lane width, authentication, controller, software and site details before finalizing the bill of materials.
Structure commercial inquiries around quantity, selected options, installation scope and delivery location.
Coordinate product delivery requirements according to project location, supplier status and order scope.
Clarify warranty expectations for the actual supplied gate, controller and reader components at quotation stage.
Help identify another entrance-control type when the original model does not fit the environment or security objective.
This approach is useful to SMBs, enterprise IT departments, security managers, project consultants, facility teams and procurement departments because each group sees a different part of the same project. Procurement needs a clear bill of materials and commercial scope. Security needs an appropriate control level. Facilities needs floor and power readiness. IT may need controller, network and software integration. By collecting these questions before the order, FourTeck helps reduce the risk of discovering missing items during installation.
Buyers can also explore FourTeck’s broader CCTV and access-control solutions or review networking, firewall and switching support when the access project depends on new network infrastructure. For a combined requirement, use the FourTeck contact page and provide the complete site scope.
Frequently Asked Questions
What is the Mars-S100 used for?
It is an indoor single-lane swing barrier used to control pedestrian passage as part of an access-control system. After a connected reader and controller validate an approved credential, the acrylic barrier swings open. It suits managed entrances such as offices, receptions, institutions and similar sites where the required physical-security level matches the manufacturer’s low-security classification.
Is it available for projects in Dubai and the UAE?
FourTeck.com can support product inquiries, configuration review and quotations for UAE requirements. Availability is not fixed across every version because lane width, finish, reader, controller and quantity can affect sourcing. Contact FourTeck with the required configuration and project location to request a current availability check.
Can FourTeck help choose the reader and controller?
Yes. FourTeck can review the intended credential method, existing access platform, user workflow and physical mounting requirement. ZKTeco lists several RFID, fingerprint, palm, QR and face options and recommends C3-200 or InBio260 Pro controllers. The final choice should be confirmed against the complete project rather than selected only from a compatibility list.
Does the gate open during a power failure?
The manufacturer specifies automatic barrier opening during power loss and also provides a voltage-free fire-alarm input for emergency operation. The installation team should connect and test emergency behavior as part of commissioning and ensure the finished design follows the building’s approved life-safety and evacuation requirements.
Can the gate be supplied with a 900 mm passage?
ZKTeco lists 900 mm as an optional lane width, compared with the standard 660 mm. A wider lane can be useful for suitable trolley, luggage or wider pedestrian requirements, but buyers should confirm the final clear passage against the project’s accessibility, circulation and emergency-route requirements.
Does it support ZKBio software?
The manufacturer lists ZKBio CVAccess and ZKBio CVSecurity support depending on the controller installed. Because software compatibility can depend on controller family, revision and deployment design, buyers should share the exact software and controller details when integrating with an existing environment.
What flooring is required for installation?
ZKTeco specifies a flat and level finished floor and notes that a base plate can be an option for an unfinished floor. The installer should also confirm anchor locations, embedded or surface cable routing, electrical supply and clear service access before equipment is positioned.
Is the Mars-S100 a high-security turnstile?
No. The manufacturer lists its security level as low. It is intended for managed pedestrian access where a compact automated gate and credential workflow are suitable. Sites that require strong forced-entry resistance, anti-climb protection or perimeter containment should compare a more appropriate high-security entrance-control category.
How do I request a business quotation?
Send FourTeck.com the quantity, site location, entrance measurements or drawing, number of lanes, preferred lane width, credential method, controller/software details, cabinet finish and whether installation is required. Adding photos and an expected project schedule helps the team identify configuration questions before preparing the quotation.
Need Help Planning the Right Entrance-Control Configuration?
Share your entrance dimensions, lane quantity, preferred credential method and existing access-control details. FourTeck.com can help review product fit, configuration options, current availability, warranty guidance, delivery requirements and related installation scope for your business project.
