ZKTeco ProMA-RF Facial Recognition RFID Terminal in Dubai, UAE
For businesses planning controlled-door access with both touchless facial authentication and RFID credentials, ProMA-RF provides a focused combination of speed, credential capacity, outdoor-ready construction and integration options. The terminal is designed as a standalone access control device rather than a simple card reader, making it relevant for organizations that need identity verification, event recording, door control interfaces and connection to a wider ZKTeco management environment. FourTeck.com helps buyers evaluate the correct card module, software requirement, mounting location, power arrangement, door hardware and project quantity before they request a quotation.
✓ IP67 / IK07 Rated
✓ Configuration Guidance
✓ UAE Quote Support
Quick Product Information
Buyer Snapshot: Is ProMA-RF a Good Fit?
Busy procurement and security teams often need a quick answer before reviewing every technical detail. ProMA-RF is best considered when facial recognition and RFID are the two primary authentication methods, an outdoor-capable enclosure is important, and the project may benefit from centralized management or integration with door-control components. It is not the fingerprint-focused model in the ProMA family, and it is not the QR-focused version, so model selection should match the credential workflow rather than simply choosing the newest device.
Controlled entrances where users authenticate by face or supported RFID credentials.
Two common access methods in one rugged terminal, reducing the need for separate face and card devices.
Confirm RFID technology, door hardware, software platform, optional palm requirement and mounting environment.
Corporate buildings, warehouses, campuses, residences, gated internal areas and project sites.
Face capacity and RFID modules can vary by selected version; verify the exact supplied specification.
Use-case review, product matching, quote preparation and related access-control component guidance.
Product Overview
The ProMA-RF sits in ZKTeco’s ProMA family of standalone outdoor access control terminals. Within that family, the RF version is specifically positioned for face and RFID authentication, with optional palm authentication on supported configurations. That distinction matters because buyers often compare three closely related names: ProMA, ProMA-RF and ProMA-QR. The base ProMA includes fingerprint capability, while ProMA-QR adds QR authentication. Choosing the RF model therefore makes the most sense when fingerprint or QR workflows are not required and the organization wants to standardize around facial and card credentials.
From an operational perspective, the terminal combines identity capture, credential verification, local event storage and door-control interfaces in one wall-mounted device. The current international specification lists a 2-inch color LCD, binocular 2MP WDR cameras, a Linux operating system, a quad-core A55 processor, 1GB RAM and 8GB ROM. ZKTeco specifies 30,000 facial templates as standard, 50,000 card credentials, 50,000 users and 500,000 transaction records. Those capacities make the product relevant not only to small offices but also to larger facilities where the credential database and event history need substantial headroom.
Physical durability is another important purchasing consideration. The current international product specification lists an aluminum-alloy housing, IP67 ingress protection and IK07 vandal resistance. For UAE deployments, that can be useful in areas exposed to dust, humidity, accidental impact or semi-outdoor conditions. However, a protection rating does not remove the need for correct electrical installation, suitable weatherproof cabling, appropriate mounting and thoughtful placement away from direct conditions that could interfere with camera performance or user approach.
The terminal is also designed to work as part of a broader access-control environment. TCP/IP, Wiegand input/output and ZKTeco RS485 are listed, together with interfaces for electric lock, door sensor, exit button, alarm and auxiliary functions. ZKTeco also lists integration with ZKBio CVSecurity and ZKBio Time, as well as SIP video intercom and ONVIF capabilities on the current platform. FourTeck.com can help UAE buyers translate these technical options into a practical bill of materials by reviewing how many doors are involved, which credentials are already in use, whether an existing controller or software platform must be retained, and what installation accessories are required.
Key Business Benefits
◆ Faster Entry Flow
Facial authentication is specified at less than 0.35 seconds, helping reduce hesitation at controlled doors during busy arrival periods. Speed matters most when paired with sensible enrollment, user positioning and a door mechanism that can respond quickly after a valid credential.
◆ Dual Credential Strategy
Face and RFID give organizations two everyday methods without forcing all users into a single workflow. Cards can remain useful for employees, contractors or exception cases, while facial authentication supports a touchless experience for enrolled users.
◆ Capacity for Growing Databases
A 30,000-face standard capacity, 50,000-card capacity and 500,000 transaction log provide useful headroom for organizations that expect staff, residents, students or contractor records to expand over time. Optional face expansion is available on supported configurations.
◆ Rugged Installation Profile
The aluminum-alloy enclosure, IP67 rating and IK07 vandal resistance support deployment in tougher access points than a basic indoor reader. Buyers should still plan cable routing, electrical protection and mounting to match the actual site environment.
◆ Integration Flexibility
TCP/IP, Wiegand and RS485 connectivity, plus door control interfaces, make the terminal relevant to both standalone and integrated access-control projects. This can simplify migration when an organization already has locks, readers, controllers or management software in place.
◆ Centralized Administration
Support for ZKTeco management platforms and an embedded webserver can help administrators standardize configuration, enrollment and event review. The correct software design should be confirmed before ordering, especially in multi-door or multi-site projects.
◆ Better Procurement Clarity
Because ProMA-RF has a clearly defined face-and-card role, procurement teams can avoid paying for fingerprint or QR functions they do not plan to use. FourTeck.com can help map the model to the intended credential policy and accessory list.
The practical value of these benefits depends on correct system design. A high-capacity terminal does not automatically make an access-control project complete: the lock type, fail-safe or fail-secure policy, fire-alarm integration, power supply, network security, user enrollment process and management software all affect the final outcome. FourTeck.com encourages buyers to treat the terminal as one component in a complete controlled-entry workflow rather than as an isolated purchase.
Product Highlights That Matter to Buyers
Suitable for organizations that need a large facial enrollment database. A 50,000-face option is listed for supported ProMA-RF configurations, so exact capacity should be confirmed at quotation.
The standard international specification lists dual-frequency ID and IC DESFire EV1/EV2 support, with broader multi-tech modules available as options.
Dual cameras with wide dynamic range are designed to support facial authentication across challenging lighting situations, though installation angle and ambient lighting still influence user experience.
A sizable local event history supports facilities with regular access activity and provides administrators with more room before log management becomes a concern.
The device includes interfaces for an electric lock, door sensor, exit button, alarm and auxiliary functions, helping it operate as a practical access-control endpoint rather than only a biometric reader.
Current ZKTeco documentation lists SIP video intercom and ONVIF capabilities for supported platform integrations. Buyers should confirm the intended indoor monitor, NVR or software architecture during design.
One important procurement point is that regional documents can sometimes show different revisions or optional modules. For a project order, the safest approach is to state the required authentication methods, RFID credential type, software environment, face capacity, communication interfaces and environmental rating in the request for quotation. That gives FourTeck.com a clearer basis for matching the offered unit to the project rather than relying on a generic family description.
Technical Specifications
| Specification | ProMA-RF Detail |
|---|---|
| Brand / Model | ZKTeco ProMA-RF |
| Authentication Methods | Face / Card / Palm (optional) |
| Display | 2.0-inch color LCD, 240 × 320 |
| Camera | Binocular 2MP WDR camera |
| Operating System | Linux |
| Processor / Memory | Quad Core A55 at 1.2GHz, 1GB RAM, 8GB ROM |
| Face Capacity | 30,000 (1:N); 50,000 optional on supported configuration |
| Card Capacity | 50,000 (1:N) |
| User Capacity | 50,000 (1:N) |
| Transaction Capacity | 500,000 records |
| Facial Authentication Speed | Less than 0.35 seconds |
| Facial Authentication Distance | 30cm to 170cm |
| Card Technology | Standard: ID & IC DESFire EV1/EV2, 125kHz & 13.56MHz dual frequency; optional multi-tech modules add additional supported technologies |
| Communication | 1 × TCP/IP, 1 × Wiegand input/output, 1 × ZKTeco RS485 |
| Door Interfaces | Aux input/output, electric lock, door sensor, exit button, alarm; doorbell support |
| Software | ZKBio CVSecurity (AC Push) and ZKBio Time (TA Push) listed by ZKTeco |
| Video / Intercom | SIP Protocol Video Intercom v2.0; ONVIF support listed for current platform |
| Power Supply | DC 12V 3A |
| Operating Temperature | -26°C to 55°C |
| Operating Humidity | 10% to 90% RH, non-condensing |
| Protection | IP67 water/dust protection and IK07 vandal resistance on current international specification |
| Housing | Aluminium alloy |
| Dimensions | 194.7 × 68.7 × 28.3mm |
| Net Weight | 0.45kg |
| Installation | Wall mount; compatible with Asian gang-box / single gang-box |
| Factory ID | AC01-PF07H-47 |
| Warranty / Availability | Configuration and supplier dependent; confirm current terms with FourTeck.com |
Choosing the correct specification starts with the credential policy. If the organization already issues MIFARE, DESFire, HID or another card family, that information should be included in the request because optional RFID modules expand the supported technologies. Buyers should also decide whether the standard 30,000-face capacity is enough or whether the project requires the optional higher-capacity configuration. For a single door, the built-in interfaces may be sufficient as part of a straightforward design; for multiple doors, centralized software, controllers, network architecture and access-level planning become more important. If video intercom or ONVIF integration is part of the requirement, identify the intended indoor monitor, VMS or NVR environment so compatibility can be reviewed before installation. Finally, confirm power supply, lock current, relay design, fire-safety requirements and cable routes with the installer. FourTeck.com can use these details to help match the terminal, accessories and related infrastructure to the intended deployment.
Configuration and Buyer Guidance
Access-control hardware is easiest to procure when the buyer provides a short design brief rather than only a model number. ProMA-RF can work in different deployment patterns, but its card module, software integration, access-control wiring and optional capabilities should match the real site. Before requesting a quote, answer the following practical questions.
State whether this is a single entrance, a small group of doors or a larger multi-site rollout. Door count affects software, controller, network and accessory planning.
Identify the card technology already issued to users. Do not assume every ProMA-RF configuration supports every credential without the correct reader module.
Compare your current and expected database size with the standard face and card capacities, leaving room for future additions.
Clarify whether the terminal will be managed locally, through ZKBio CVSecurity, ZKBio Time or another supported architecture.
Share the lock type, exit device, door contact, power supply and any controller or safety interfaces already present.
Palm authentication is configuration dependent, so it should be specified at quotation rather than assumed to be included.
For replacement projects, also provide the old device model, mounting dimensions, communication method and software version. A replacement that looks similar physically may still require changes in card compatibility, firmware, database migration or wiring. For new projects, a simple door schedule is useful: door location, indoor or outdoor status, lock type, network point, power source, credential method, expected user count and whether intercom is required. FourTeck.com can use that information to recommend a more complete bill of materials and reduce the risk of missing an accessory after the main terminals have already been ordered.
Ideal Business Use Cases
Corporate Office Entrances
Organizations can use facial authentication for enrolled staff while retaining RFID cards for visitors, contractors or alternative credential policies. Centralized access levels and event logs become useful when multiple departments share the same building.
Warehouses and Logistics Sites
Rugged construction and fast user verification can fit staff entrances, secure rooms and controlled operational areas. Project planning should account for dust exposure, gloves or PPE, network cabling and the physical location of the terminal.
Education Campuses
Large credential capacities can support staff, faculty and authorized users across controlled buildings. Buyers should design user groups, schedules and exception procedures before rollout rather than relying on a single global access policy.
Residential Communities
Face and card access can be applied to resident entrances, facilities or controlled common areas. Video intercom requirements, visitor workflows and property-management responsibilities should be reviewed as part of the system design.
Healthcare and Clinic Areas
Touchless facial authentication can reduce dependence on physical interaction with a keypad or fingerprint sensor. Access policies should still account for staff turnover, temporary contractors and emergency egress requirements.
Multi-Site Business Rollouts
Organizations standardizing on one face-and-RFID endpoint can benefit from consistent enrollment and management practices. Successful multi-site deployment depends on network planning, software architecture, naming conventions and local installation standards.
The terminal is particularly suitable where a buyer wants the convenience of facial access without abandoning card credentials. It is less appropriate when fingerprint authentication is mandatory or when QR credentials are a primary workflow, because those requirements point to other members of the ProMA family. Similarly, a high-security project may need additional controllers, secure relay arrangements, anti-passback logic, visitor management or integration with other security platforms. FourTeck.com can help buyers compare the terminal against those broader requirements so the selected device supports the intended operational process rather than becoming an isolated piece of hardware.
ZKTeco ProMA-RF Facial Authentication Performance
Facial authentication is the defining biometric capability of the RF model. ZKTeco lists a binocular 2MP WDR camera system, a facial authentication distance of 30cm to 170cm and recognition speed below 0.35 seconds. For a buyer, these figures matter because the terminal is expected to identify an enrolled person quickly enough that access does not feel like a slow check-in process. A short recognition time can support smoother morning entry, shift changes and controlled staff movement when many users approach the same door.
However, quoted recognition speed is only one part of deployment quality. Camera angle, mounting height, ambient lighting, direct sunlight, reflective surfaces and user approach all affect how consistently people present themselves to the device. The WDR camera design helps in scenes with contrast between bright and dark areas, but installers should still choose a location that gives users a clear, predictable approach path. Enrollment quality is equally important: poorly captured profiles create avoidable exceptions and can reduce confidence in the system even when the hardware is capable.
Capacity also deserves attention. A standard 30,000-face database is substantial for many corporate or residential deployments, while ZKTeco lists an optional 50,000-face configuration for ProMA-RF. Procurement teams should not automatically choose the largest number. Instead, estimate current active users, growth over the system life, temporary credentials and any site-by-site segmentation. A smaller database may be perfectly adequate when access is separated by site, while a centralized multi-site organization could value additional headroom.
ZKTeco ProMA-RF RFID Credential Flexibility
RFID is more than a backup authentication method in many access-control projects. Existing organizations may already have thousands of staff cards, multi-application smart credentials or a corporate standard built around a particular technology. The current international specification lists a standard dual-frequency card capability covering ID and IC DESFire EV1/EV2 at 125kHz and 13.56MHz, while optional multi-tech reader modules expand compatibility to additional credential families such as FeliCa, HID Prox and HID iClass depending on the selected module.
This modular approach is valuable because it allows the same terminal family to fit different installed card estates, but it also creates a procurement responsibility: the buyer must specify what card is actually used. Describing the requirement only as “RFID” is not enough. An EM-format credential, MIFARE-type credential, DESFire card or HID technology may require different reader support. A project can become unnecessarily expensive if all cards must be replaced simply because the terminal was ordered with the wrong reader module.
Card capacity is listed at 50,000 credentials. That can support a large population, but database planning should still account for inactive users, temporary badges, lost cards, card replacement rules and synchronization across multiple devices. Security teams should define whether face and card can be used independently or in a multi-verification sequence for selected doors. ZKTeco lists multiple verification methods among standard functions, making policy design an important part of configuration.
ZKTeco ProMA-RF Management, Integration and Outdoor Design
A modern access terminal is rarely purchased for recognition alone. Administrators also need to enroll users, apply access levels, review events, manage devices and connect each door to the surrounding security infrastructure. ProMA-RF supports TCP/IP for network communication, Wiegand input/output, ZKTeco RS485 and interfaces for electric lock, door sensor, exit button and alarm functions. These connections give system designers several ways to use the terminal in new installations or as part of an existing access-control environment.
The current ZKTeco specification lists webserver functionality, access levels, groups, holidays, anti-passback, record query, tamper alarm and multiple verification methods. It also lists AC Push and TA Push protocol modes, ZKBio CVSecurity, ZKBio Time, SIP video intercom and ONVIF support. For buyers, the important question is not whether every listed capability sounds useful; it is which capabilities are required for the planned deployment. A simple single-door installation has different software and network needs from a campus with centralized visitor management, intercom stations and surveillance integration.
The physical design also supports more demanding locations. The current international specification lists IP67 protection, IK07 vandal resistance, an aluminium-alloy housing and an operating temperature from -26°C to 55°C. These ratings can be attractive in regional projects, but the rest of the installation must be designed to a similar standard. Cable entry, junction boxes, power supplies and lock hardware should not become weak points. Direct solar exposure can also raise enclosure temperatures or create camera glare even when the ambient temperature is inside the stated operating range.
What Should You Know Before Choosing This Access Terminal?
The questions below reflect the practical concerns that arise when a security team, installer or procurement department evaluates a face-and-card terminal. They focus on fit, configuration, compatibility and rollout preparation rather than simply repeating the specification table.
Is this model suitable if we want face and card but no fingerprint?
Yes. ProMA-RF is the family variant specifically listed for face and card authentication, with optional palm on supported configurations. If fingerprint is mandatory, the base ProMA model is the relevant variant. If QR credentials are required, ProMA-QR should be evaluated instead. Matching the variant to the intended credential policy avoids paying for functions that will not be used.
How large a user database can we plan around?
The current international specification lists 50,000 users, 30,000 face templates and 50,000 card credentials, with 500,000 transaction records. A 50,000-face option is listed for supported ProMA-RF configurations. Plan capacity using active users plus expected growth and temporary credentials rather than choosing a higher-capacity option without a real need.
Will it read our existing RFID cards?
Possibly, but the exact credential technology must be checked. ZKTeco lists standard dual-frequency ID and IC DESFire EV1/EV2 support and optional multi-tech modules for additional card families. Provide the card technology, existing reader model or credential details before ordering so the correct reader configuration can be selected.
Can we use it at an outdoor entrance?
The current international specification lists IP67 ingress protection and IK07 vandal resistance, so the device is designed for demanding installation areas. Outdoor suitability still depends on correct mounting, sealed cable routing, suitable power hardware and a camera position that limits extreme glare or poor approach angles. Confirm the exact supplied revision because regional documents can vary.
What should we prepare for software integration?
Identify whether the project will use ZKBio CVSecurity, ZKBio Time or another supported management architecture, and note how many terminals and sites will be managed. Network addressing, server requirements, user synchronization, access levels and event retention should be planned before deployment. Existing ZKTeco software versions should be stated for replacement projects.
Can it control a door directly?
The terminal includes interfaces for an electric lock, door sensor, exit button, alarm and auxiliary functions, so it can participate directly in a door-control design. The electrical arrangement still needs to be engineered around the lock current, fail-safe or fail-secure requirement, fire-release logic and security level. Some projects may benefit from a separate secure relay or controller.
Should we choose the optional palm feature?
Choose optional palm only if the access policy needs another touchless biometric method or if specific user groups cannot rely on face or card alone. ZKTeco lists up to 5,000 palm templates on the optional configuration. Because optional hardware and software support can affect the supplied model, include the palm requirement in the original quotation request.
What should be checked before replacing an older terminal?
Check card technology, mounting footprint, power supply, lock wiring, Wiegand or RS485 usage, network settings, database migration method and software compatibility. A replacement can require more than swapping the front-end device. Sharing the existing terminal model and system diagram helps FourTeck.com identify likely compatibility questions before the order is finalized.
What information gives us a more accurate quotation?
Provide door quantity, required terminal quantity, credential type, face database size, software platform, optional palm requirement, existing controller details, lock and exit hardware, site environment and delivery location. Project quantities and required accessories can materially change the bill of materials, so a concise technical brief is more useful than asking for a terminal price alone.
Business Requirements to Match Before You Buy
For a business that wants touchless entry plus cards
This model fits when facial authentication is the preferred everyday method but RFID remains necessary for contractors, visitors or staff exceptions. Define whether both methods are independent or combined for higher-security doors.
For an outdoor or exposed access point
The rugged enclosure and listed IP67/IK07 ratings support demanding placement. Buyers should match that protection with suitable cabling, junction hardware, power supplies and mounting practices.
For organizations keeping existing credentials
Retaining cards can reduce migration disruption, but only when the selected RFID module supports the credential family already in use. Share card technology before quotation.
For multi-door growth
The terminal can be part of a larger managed access environment, but software, network design, naming standards, access groups and controller strategy should be standardized before a wider rollout.
For buyers replacing older ZKTeco hardware
Replacement planning should check database migration, old wiring, server software, communication settings and physical mounting. Same-brand replacement does not guarantee drop-in compatibility.
For projects that need video intercom
Current platform documentation lists SIP and ONVIF capabilities. Confirm the intended indoor monitor, NVR, VMS and network design so the required integration is reviewed before purchase.
A suitable product decision comes from matching these requirements in combination. A warehouse may value outdoor durability and card retention, while a headquarters project may place more weight on software management and intercom integration. A residential project may need a different balance again. FourTeck.com can help turn a short requirement list into a quote-ready configuration with the appropriate model, credentials and supporting components.
What Buyers Should Check Before Purchase
A face-and-RFID terminal can look straightforward in a product list, yet purchasing mistakes often come from the surrounding system rather than the terminal itself. Before approval, confirm exactly which ProMA family variant is required. ProMA-RF is intended for face and card, while other family models add fingerprint or QR capabilities. Next, identify the card technology. If an organization is migrating from an existing access system, keeping the same employee cards can be a major business requirement, so the reader module must be selected accordingly.
Configuration Fit
Confirm face capacity, optional palm requirement, RFID module and whether the project needs intercom or ONVIF integration. Treat optional capabilities as quotation items, not default assumptions.
Compatibility Check
Review existing cards, door controllers, lock voltage and current, exit devices, door contacts, server software and cabling. Include the current equipment list for replacement projects.
Availability and Warranty
Supply status, exact regional version and warranty terms can vary by order source and quantity. Ask for current confirmation before issuing a purchase order.
Quote Preparation
Provide project quantity, door count, credential technology, site environment, management software, delivery location and required accessories. Better input usually results in fewer quote revisions.
Long-term operating cost should also be considered. The terminal itself may represent only part of the project budget. Power supplies, locks, secure relay boxes, exit buttons, door sensors, cards, network switches, server software, installation labor and future support can all affect total cost. For a multi-site deployment, standardization can reduce administration effort, but only if naming, user enrollment, access levels and network security are planned consistently.
Finally, define what success looks like after installation. Is the goal faster staff entry, fewer physical touchpoints, reuse of existing badges, centralized event management or a stronger outdoor access point? A clear operational objective makes it easier to choose the correct model and avoids selecting hardware only because of headline capacities. FourTeck.com can review these buying points and help assemble a quotation that reflects the full access-control requirement.
UAE Availability and Service Support
FourTeck.com supports inquiries for ZKTeco access-control hardware in Dubai and across the UAE, with assistance aimed at helping buyers move from a model name to a practical project requirement. Availability can vary according to the exact hardware revision, optional RFID module, biometric capacity, order quantity and supplier channel. For that reason, FourTeck.com does not treat every ProMA family listing as interchangeable. The quotation process can be used to confirm the requested authentication combination, capacity option and integration requirements before procurement.
Pre-sales support can include a review of door quantity, current credential type, existing access-control software, network connectivity, lock and exit hardware, required optional features and site conditions. This is particularly useful for replacement projects where the buyer wants to preserve existing cards, cabling or central management systems. It can also help new projects avoid incomplete bills of materials that omit power supplies, sensors, secure relay components or software requirements.
Delivery coordination can be discussed once the product configuration, quantity and destination are known. Warranty guidance should also be confirmed as part of the quotation because coverage can depend on the supplied source, region and order terms. Buyers who require project documentation, serial-level tracking, staged delivery or alternative model suggestions should include those requirements in the inquiry so they can be reviewed before purchase approval.
Dubai, Abu Dhabi, Sharjah and Ajman Coverage
Businesses in Dubai, Abu Dhabi, Sharjah, Ajman and other UAE locations can contact FourTeck.com for product availability, configuration guidance and quotation assistance. The same procurement questions apply across locations: which card technology is required, how many doors are involved, what software will manage the devices, whether the installation is indoor or exposed, and which accessories must be included. For multi-location projects, it is helpful to provide a site-by-site schedule so quantities, delivery requirements and configuration standards can be reviewed together. FourTeck.com can also discuss suitable alternatives if the requested version is not aligned with the credential method or project architecture.
GCC and Africa Availability
FourTeck.com also supports business technology inquiries for selected GCC and Africa markets through its regional inquiry channels. Organizations sourcing for Saudi Arabia, Qatar, Oman, Kuwait or Bahrain can request product matching and quotation support, while buyers with projects in Kenya, Uganda and other Africa-region markets can use FourTeck’s regional platforms where relevant. Availability, delivery arrangements, warranty handling and supported product versions can vary by country and supplier route, so each regional request should include the final destination and project quantity.
Regional deployment planning is especially important for access-control hardware because card technologies, power arrangements, installation practices and software support may differ between existing sites. A multinational buyer standardizing the same terminal family should document the desired card module, user capacity, software platform, firmware expectations and accessory bundle for every site. This reduces the chance of receiving different configurations under the same family name.
For regional inquiries, buyers can start with FourTeck.com or review relevant regional channels such as FourTeck Kuwait, FourTeck Kenya, FourTeck Uganda and FourTeck Africa. Final supply terms should be confirmed for the destination before purchase.
Other ZKTeco Options Buyers May Consider
The correct alternative depends mainly on the authentication method rather than appearance. Buyers who need fingerprint or QR credentials should compare other ProMA family variants before ordering. Projects with different capacity, form factor or software priorities may also benefit from another ZKTeco access-control series.
ZKTeco ProMA
Consider when fingerprint is required in addition to face and RFID. Confirm palm options and capacity requirements for the selected configuration.
ZKTeco ProMA-QR
A better family fit where QR credentials are part of the access workflow together with face and RFID authentication.
ZKTeco SpeedFace Series
Useful to evaluate when the project needs a different display size, biometric mix or deployment profile within ZKTeco’s facial access range.
ZKBio CVSecurity
Relevant to projects that need centralized access-control and security management around supported ZKTeco devices.
These related options should be treated as selection paths rather than automatic upgrades. For example, adding fingerprint only helps when the organization actually intends to enroll and maintain fingerprint templates. QR capability is valuable for visitor or mobile credential workflows only when the surrounding software and operational process support it. FourTeck.com can help compare authentication needs, card compatibility, software requirements and installation environment so the alternative is chosen for a practical reason.
Why Buyers Choose FourTeck.com for Access-Control Procurement
Business buyers often need more than a part number. Access-control projects combine security policy, door hardware, credentials, networking, software and installation, so the quality of the purchase depends on how well those pieces are matched. FourTeck.com supports procurement teams, IT departments, facilities teams, contractors and integrators by helping organize the information required for a quote-ready solution.
Product sourcing assistance for single devices, project quantities and related infrastructure.
Help reviewing authentication methods, capacity, card technologies, software and accessories.
A structured quotation process based on quantity, destination and project requirements.
Coordination after configuration and supply terms are confirmed for the order.
Clarification of applicable coverage and order terms before procurement approval.
Comparison with related models when fingerprint, QR, different capacity or another architecture is required.
The goal is to reduce avoidable selection errors. A buyer should not discover after delivery that existing cards cannot be read, the software version is incompatible, an optional module was assumed to be standard, or the door requires additional secure relay hardware. By sharing a basic site and credential brief before quotation, buyers give FourTeck.com a stronger basis for reviewing the intended configuration. That approach is useful for both small business purchases and larger projects where consistent configuration across many doors matters to long-term administration.
Frequently Asked Questions
What is ProMA-RF mainly used for?
It is a standalone access-control terminal for controlled doors where users authenticate by facial recognition or supported RFID cards. The device can store user and transaction data, connect to door-control components and operate within supported ZKTeco software environments. Its role is broader than a simple reader because it combines authentication, access logic interfaces and event handling in one endpoint.
Does the ProMA-RF include fingerprint recognition?
No. The RF version is listed for face and card authentication, with palm available as an optional capability on supported configurations. Buyers who require fingerprint should evaluate the base ProMA model in the same family. This distinction is important because the three ProMA variants look related but are designed around different combinations of credentials.
How many faces and cards can it store?
The current international specification lists 30,000 facial templates and 50,000 card credentials, with 50,000 total users and 500,000 transaction records. ZKTeco also lists a 50,000-face option for supported ProMA-RF configurations. Confirm the exact supplied capacity when requesting a quotation because options can vary by configuration or regional release.
Is the terminal suitable for outdoor installation?
The current international ZKTeco specification lists IP67 water and dust protection, IK07 vandal resistance and an aluminium-alloy housing. That supports demanding placement, but installers should still protect cable entries, power components and junctions and choose a mounting position that limits extreme glare or environmental stress. Confirm the exact supplied hardware revision before final installation.
Can FourTeck.com help choose the correct RFID option?
Yes. Buyers should provide the existing card technology or reader model, especially if current employee credentials must be retained. The standard and optional reader modules support different card families, so confirming credential type before order is one of the most useful compatibility checks. FourTeck.com can include that requirement in the configuration review and quotation process.
Which software can manage this device?
ZKTeco currently lists ZKBio CVSecurity for AC Push deployments and ZKBio Time for TA Push use. The correct platform depends on whether the requirement is primarily access control, time-related management or a broader security architecture. Existing software versions, server design and multi-site synchronization should be checked before a replacement or expansion project.
What door accessories might be required?
A complete installation can require an electric lock, appropriate power supply, exit button, door sensor, secure relay or controller, cables, junction hardware and network connectivity. The exact list depends on the door type and security design. Fire-release requirements and fail-safe or fail-secure behavior should be reviewed by the project installer rather than assumed from the terminal alone.
Can businesses request bulk or project supply?
Yes, project quantities can be included in a FourTeck.com inquiry. For larger rollouts, provide door count, site locations, required device quantity, credential technology, software plan, installation environment and delivery requirements. This helps align the offered configuration across the project and allows related accessories or alternative models to be reviewed at the same time.
How do I request a UAE quotation?
Use the FourTeck.com contact page and include the product model, quantity, delivery location and key technical details. For the most accurate response, add the card technology, number of doors, software requirement, optional palm need and any existing controller or lock information. Availability and final supply terms can then be confirmed for the requested configuration.
What warranty should I expect?
Warranty coverage should be confirmed with the quotation because terms can depend on the supplied channel, region and order conditions. Buyers should ask what is covered, the applicable period, the process for service claims and whether accessories follow separate terms. FourTeck.com can provide warranty guidance for the offered supply before the purchase order is approved.
Need Help Planning Your Face and RFID Access Project?
FourTeck.com can help you review model fit, RFID credential compatibility, face capacity, software integration, door accessories, warranty guidance and delivery requirements before you request a final quotation. Share your door count and project brief to start with a configuration that matches the intended use.
