ZKTeco SpeedPalm-V5L Palm Recognition Terminal in Dubai, UAE
The SpeedPalm-V5L is designed for business entry points where organizations want a flexible combination of palm recognition, visible-light facial authentication, RFID credentials, password verification, and door-control functions in one compact terminal. Its contactless biometric workflow can reduce dependence on shared touch surfaces while supporting high-capacity user databases, rapid verification, integrated access-control connections, and SIP-based video intercom. FourTeck.com helps UAE buyers review the terminal as part of a complete access-control requirement rather than treating it as an isolated device.
✓ SIP 2.0 Video Intercom
✓ Wi-Fi and TCP/IP
✓ Configuration Guidance
Request Quote
Check UAE Availability
Quick Product Information
ZKTeco
SpeedPalm-V5L
Face and palm authentication access-control terminal
Face, palm, card and password
5-inch IPS color LCD touch screen, 720 × 1280
2MP WDR low-light camera
TCP/IP and dual-band Wi-Fi
Wall mount; indoor deployment planning recommended
SIP 2.0 protocol support
ZKBio CVAccess, ZKBio Time, ZKBio CVSecurity; ZSmart optional
Subject to model and supplier availability
Ask for configuration support →
Buyer Snapshot: Is This Terminal a Good Fit?
For a busy buyer, the main decision is not simply whether the device recognizes palms. The larger question is whether its credential options, capacity, software compatibility, door interfaces, mounting conditions, and management model match the site. The SpeedPalm-V5L is especially relevant when a project needs contactless biometric access together with card or password fallback and may also benefit from integrated video intercom.
Controlled indoor entrances in offices, campuses, clinics, hospitality sites, warehouses and managed commercial premises.
One terminal supports several verification methods, allowing an access policy to use contactless biometrics while keeping credential alternatives.
Confirm card technology, door lock interface, software, network path, power, indoor mounting position and required accessories.
The current specification supports large face, palm, card and transaction databases, suitable for more than a small stand-alone doorway deployment.
TCP/IP, Wi-Fi, Wiegand, RS485 and dedicated door interfaces provide several ways to connect the terminal into an access-control design.
The official product page does not list an ingress-protection rating. Site planners should treat weather exposure and outdoor mounting as a design concern rather than assuming outdoor protection.
Product Overview
Modern access-control projects increasingly need more than a single credential reader. A business may want a contactless biometric option for regular staff, a card-based method for selected users, a password method for controlled exceptions, and a way to connect the same endpoint to an electric lock, door sensor, exit button and alarm. The ZKTeco terminal brings those functions together in a compact wall-mounted format with a five-inch touch display and integrated imaging hardware.
The current manufacturer specification lists visible-light facial authentication together with palm authentication, standard 125 kHz ID-card support, optional 13.56 MHz IC-card support and a virtual keypad for password entry. This gives project designers room to define different access policies for different user groups. A corporate office could permit palm or face authentication for employees while retaining cards for contractors. A clinic could prefer contactless credentials at staff entrances. A warehouse could use multiple verification methods for sensitive zones. The suitability of each policy depends on the final software configuration, user workflow and security requirements.
Capacity is another reason this model belongs in a business-class conversation. ZKTeco’s current product page states support for 10,000 face templates, 15,000 palm templates, 20,000 cards and 200,000 transactions. Palm verification is specified at under 0.35 seconds and face verification at under one second. These figures are useful when evaluating database scale and user experience, but a deployment plan should still consider enrollment quality, network design, access rules, synchronization, database management and the number of terminals across the site.
For UAE buyers, FourTeck.com can help translate the terminal specification into a practical bill of materials. That may include checking power requirements, door-lock compatibility, card technology, cabling, network connectivity, server or software requirements, indoor mounting conditions, intercom needs and project quantities. This approach reduces the risk of ordering a biometric terminal without the surrounding components needed to make the doorway operational.
Key Business Benefits
◆ Contactless Entry Workflow
Palm and face authentication allow users to verify without presenting a shared keypad or touching a fingerprint sensor. That can make entry more convenient in workplaces where hygiene, queue movement and user acceptance matter. Card and password methods remain available when the access policy requires an alternative credential.
◆ Multi-Method Security Design
The terminal supports multiple verification methods and access-control functions such as access levels, groups, holidays and antipassback. This helps administrators define different rules for different doors or users instead of relying on one universal credential approach across the whole building.
◆ High-Capacity Enrollment
Large template and transaction capacities give organizations room to handle sizeable staff populations and event records. Capacity should still be planned at system level, especially in multi-site deployments where user synchronization, retention, software licensing and central administration influence the overall architecture.
◆ Flexible Network Connectivity
TCP/IP and 2.4/5 GHz Wi-Fi provide practical network choices for different buildings. Wired Ethernet is often preferred where stable structured cabling is available, while Wi-Fi may help in locations where a network drop is difficult. Final selection should follow the site’s security and reliability policy.
◆ Door-System Integration
Dedicated interfaces for electric lock, door sensor, exit button, alarm and auxiliary input reduce the need to treat the terminal as a simple reader. Wiegand and RS485 connectivity also make it easier to evaluate integration with wider access-control infrastructure, subject to controller design and compatibility checks.
◆ Intercom Capability
SIP 2.0 support gives the model an additional role in visitor and entry communication. For projects that intend to use video intercom, buyers should confirm compatible indoor units, software modules, licenses and network configuration before ordering so the intercom design is planned as part of the system.
◆ Central Management Options
Support for ZKBio CVAccess, ZKBio Time and ZKBio CVSecurity allows the device to fit into broader ZKTeco software environments. The right platform depends on whether the project focuses mainly on access control, attendance, security management or a combination of functions, so software scope should be confirmed early.
Product Highlights
The strongest value of this terminal comes from the way several access functions are combined without forcing a buyer into one identity method. The palm module is designed for near-range contactless presentation, while the visible-light face camera handles recognition at a greater distance. This gives users two biometric experiences with different interaction styles. The anti-spoofing functions described by ZKTeco are intended to improve resistance to common photo and video presentation attacks, but buyers should still treat the terminal as one layer in a wider physical-security design.
Specified at under 0.35 seconds per palm authentication.
Visible-light facial authentication is specified at under one second.
10,000 face templates and 15,000 palm templates on the current product specification.
Standard 125 kHz ID card support with optional 13.56 MHz IC card capability.
Ethernet plus Wi-Fi support for 2.4 GHz and 5 GHz networks.
Lock, door sensor, exit button, alarm, auxiliary input, Wiegand and RS485 interfaces.
Before purchase, check whether the project requires standard ID cards or optional IC cards, whether the selected ZKTeco software needs additional licensing, whether SIP intercom is part of the scope, and whether the intended mounting area is protected from weather. The current product page does not state an IP protection rating, so outdoor exposure should not be assumed to be supported.
Technical Specifications
| Specification | Details |
|---|---|
| Brand / Model | ZKTeco SpeedPalm-V5L |
| Display | 5-inch IPS color LCD touch screen, 720 × 1280 |
| Camera | 2MP WDR low-light camera |
| Operating System | Linux |
| Processor / Memory | 1 GHz dual-core CPU; 1 GB RAM; 8 GB ROM |
| Authentication Methods | Face, palm, card, password via virtual keypad |
| Face Capacity | 10,000 templates (1:N) |
| Palm Capacity | 15,000 templates (1:N) |
| Card Capacity | 20,000 cards (1:N) |
| Transaction Capacity | 200,000 |
| Verification Speed | Face: under 1 second; Palm: under 0.35 seconds |
| Recognition Distance | Face: 30–100 cm; Palm: 5–15 cm |
| Algorithms | ZKFace V3.9 and PalmElite3.3.3 |
| Card Type | 125 kHz ID card standard; 13.56 MHz IC card optional |
| Communications | 1 × TCP/IP; Wi-Fi IEEE 802.11 a/b/g/n/ac on 2.4/5 GHz; 1 × Wiegand input or output; 1 × ZKTeco RS485 |
| Door Interfaces | 1 × auxiliary input, 1 × electric lock, 1 × door sensor, 1 × exit button, 1 × alarm |
| Key Functions | Access levels, groups, holidays, antipassback, record query, schedule bell, tamper switch alarm, mask detection, multiple verification methods, SIP 2.0, AC Push / TA Push switching |
| Optional Functions | IC card, ZSmart app |
| Power Supply | 12V DC, 3A |
| Operating Temperature | -10°C to 45°C |
| Operating Humidity | 10% to 90% RH, non-condensing |
| Dimensions | 227.3 × 92.3 × 24.5 mm (L × W × D) |
| Weight | 0.62 kg net; 1.3 kg gross |
| Housing | Aluminium alloy |
| Mounting | Wall mount; compatible with Asian gang-box / single gang-box |
| Supported Software | ZKBio CVAccess, ZKBio Time, ZKBio CVSecurity; ZSmart mobile app option |
| Certifications Listed | ISO 14001, ISO 9001, CE, FCC, RoHS |
| Ingress Rating | Not listed on the current official product specification |
Choosing the correct configuration requires more than checking the capacity numbers. A buyer should start with the access policy: which users will use palm, face, cards or passwords, and whether two or more methods will be required at sensitive doors. Next, confirm whether the site already uses 125 kHz ID credentials or needs 13.56 MHz IC cards. Network teams should choose between Ethernet and Wi-Fi based on stability, segmentation and security requirements. Facility teams should verify the 12V DC power source, lock type, exit button, door-contact wiring and mounting surface. If SIP intercom is required, include the compatible indoor unit and software licensing in the design. This preparation helps avoid a situation where the terminal arrives but the surrounding door system, software or credentials do not match the project.
Configuration and Buyer Guidance
A biometric access-control terminal sits at the intersection of IT, security, facilities and HR workflows. Before requesting a quotation, gather the information below so the hardware can be matched to the way the site will actually operate.
How many people will be enrolled?
Estimate employees, contractors, visitors who require persistent credentials, and future growth. Compare those figures with the face, palm and card capacities rather than assuming every user will use the same credential type.
What credential policy will be used?
Decide whether one biometric is enough or whether selected doors require multi-verification. Also identify which users may need card or password fallback and whether the existing badge technology is compatible.
What door hardware is already installed?
Share details of the electric lock, magnetic lock, door sensor, request-to-exit device, alarm interface, controller and existing reader wiring. This helps determine how the terminal should be integrated.
How will it be managed?
Clarify whether the project needs access-control administration, attendance functions, broader security management or SIP intercom. The selected ZKTeco software platform and licenses should match those goals.
Where will the terminal be mounted?
Confirm indoor location, wall type, gang-box compatibility, lighting, user approach path, power availability and network access. Avoid assuming weather resistance because an ingress-protection rating is not listed.
What support is required?
State whether you need supply only, configuration review, integration guidance, project quantities, replacement-model advice, software discussion, warranty guidance or delivery coordination.
For a more accurate FourTeck quotation, share the number of doors, number of terminals, expected users, credential type, existing access-control equipment, software preference, network method, power arrangement, installation location and delivery destination. If replacing an older ZKTeco terminal, include the exact old model and explain which functions must be retained. That information makes it easier to identify whether the SpeedPalm-V5L fits directly or whether another model, controller, reader or accessory should be considered.
Ideal Business Use Cases
This model is best evaluated as an indoor access endpoint for organizations that need reliable identity verification and centralized management. The following scenarios show where its combination of biometrics, credentials, interfaces and network options can be useful.
Corporate Office Entrances
For offices with regular employee traffic, contactless face or palm verification can provide a smooth entry process while card support offers an alternative for selected users. Access levels, groups and holiday schedules help administrators apply different rules across departments or controlled zones.
Clinics and Healthcare Administration Areas
Contactless biometrics can be attractive where shared-touch interaction is undesirable. The terminal may suit controlled staff entrances, back-office zones and administrative areas, provided the site reviews biometric-data policy, enrollment procedures, indoor mounting and user workflow.
Education Campuses
Schools, colleges and training centers may use the terminal for staff-only doors, labs, offices or other controlled spaces. Larger template capacity can be useful where many users are enrolled, but the final design should address data governance, door grouping and administration responsibility.
Warehouses and Distribution Facilities
The device can support controlled access to operations rooms, secure storage, IT rooms or staff entrances. Multiple verification methods can help separate permanent employees from contractors. Site planners should choose a protected indoor mounting location rather than exposing the unit to harsh outdoor conditions.
Hospitality and Managed Properties
Back-of-house entrances, staff areas and controlled service spaces may benefit from a terminal that combines biometric access with video intercom capability. SIP integration should be planned with compatible indoor endpoints and software, particularly where reception or security staff need visual communication.
Multi-Door Business Projects
In multi-door environments, the terminal can be part of a wider ZKTeco deployment with centralized users and event management. Buyers should calculate software licensing, network topology, power, controller requirements, door hardware and user synchronization across all locations before finalizing quantities.
The terminal is not automatically the right choice for every door. Outdoor gates, exposed perimeter locations, highly vandal-prone environments, specialty high-security applications or projects needing a different credential technology may call for another product or protective design. FourTeck can help compare the requirement against suitable ZKTeco access-control options before a project quantity is confirmed.
ZKTeco SpeedPalm-V5L Contactless Biometric Performance
Palm and face recognition serve different interaction patterns, and this terminal gives a business both. The palm module is designed for a user to present a hand at close range, with the current specification listing a 5 to 15 cm recognition distance and verification in under 0.35 seconds. Facial authentication operates at a longer 30 to 100 cm distance and is specified at under one second. In practical terms, a workplace can choose the method that best fits the doorway, user population and access policy rather than forcing every person into one biometric experience.
ZKTeco also lists anti-spoofing functions for facial and palm authentication. Those mechanisms are useful, but security teams should avoid viewing any single biometric endpoint as a complete physical-security strategy. Door construction, lock strength, access rules, enrollment control, administrator privileges, audit review, network protection and response procedures all contribute to the actual security result. A strong system combines identity verification with appropriate operational controls.
Enrollment quality matters as well. Poor placement, rushed enrollment, inconsistent user guidance or an unsuitable mounting position can affect everyday experience even when the hardware specification is strong. During planning, consider approach distance, display visibility, nearby lighting, user height range and queue behavior. Clear enrollment procedures and user communication can reduce failed attempts and help the speed ratings translate into a smoother real-world entry process.
ZKTeco SpeedPalm-V5L Access Control Connectivity
A biometric terminal becomes more useful when it can fit cleanly into the surrounding door and network infrastructure. The SpeedPalm-V5L includes Ethernet, dual-band Wi-Fi, Wiegand input or output, ZKTeco RS485 and dedicated connections for an electric lock, door sensor, exit button, alarm and auxiliary input. This collection of interfaces makes the device suitable for several deployment styles, but the chosen architecture should be documented before wiring begins.
For many permanent business installations, wired Ethernet remains attractive because it offers a predictable physical connection and is easy to place on a controlled network segment. Wi-Fi can be useful when cabling is difficult, provided wireless coverage, security policy and reliability are acceptable. Wiegand and RS485 may matter when integrating with controllers or readers, but compatibility should be confirmed by model and system design rather than inferred from the presence of an interface alone.
SIP 2.0 adds another network consideration. If video intercom is required, confirm compatible indoor monitor or software endpoints and any licensing implications. Intercom traffic, access-control events and device management may share network infrastructure, so IT and security teams should coordinate addressing, VLAN policy, firewall rules and system ownership during rollout.
ZKTeco SpeedPalm-V5L Management, Capacity and Deployment
The current manufacturer specification gives the terminal capacity for 10,000 face templates, 15,000 palm templates, 20,000 cards and 200,000 transactions. These figures make it viable for substantial user populations, but capacity planning should account for how identities are distributed, how long events are retained and whether multiple terminals synchronize through a central software platform. A single device specification does not replace system-level planning.
ZKBio CVAccess, ZKBio Time and ZKBio CVSecurity are listed as supported software platforms. That gives buyers a choice depending on whether the deployment is primarily access control, attendance-related or part of a wider security-management environment. The optional ZSmart app adds another management possibility. Before ordering, verify the exact software edition, server requirements, license model, supported firmware and number of managed doors or devices. Software can influence the project cost and administrator workflow as much as the terminal itself.
Physical deployment should be treated with equal care. The terminal uses 12V DC at 3A and is designed for wall mounting, including compatibility with Asian gang-box and single gang-box formats. The current official page does not list an ingress rating, while the quick-start material recommends indoor installation. Buyers should therefore plan a protected indoor environment with suitable temperature, humidity, lighting and user approach space. For UAE facilities, that is especially important where exterior heat, dust and direct sun can be significant environmental factors.
What Should You Know Before Choosing This Terminal?
The questions below reflect how technical teams, procurement staff and business owners typically evaluate a biometric access-control terminal. Each answer focuses on fit, compatibility and project preparation so the device can be selected as part of a complete doorway solution.
Who is this terminal best suited for?
It is best suited to organizations that want an indoor access-control endpoint with contactless palm and face authentication plus card and password alternatives. Offices, education facilities, clinics, hotels, warehouses and managed commercial premises can consider it for staff or controlled-zone entrances. The final decision should reflect enrollment scale, door hardware, software, privacy policy and environmental conditions.
Is the capacity suitable for a large employee database?
The current specification supports 10,000 face templates, 15,000 palm templates, 20,000 cards and 200,000 transaction records, which is substantial for many business deployments. Still, the number of devices, central software design, retention needs and whether every user requires every credential type should be considered before deciding that the system capacity is sufficient.
Can it work with our existing access-control door?
Potentially, because the terminal provides electric-lock, door-sensor, exit-button, alarm, auxiliary, Wiegand and RS485 interfaces. Compatibility should be confirmed against the existing controller, lock voltage and type, reader protocol, cable arrangement and power design. Share the current door schematic or controller model with FourTeck so the integration can be reviewed before ordering.
Should we choose Ethernet or Wi-Fi?
Use Ethernet where structured cabling and a controlled network port are available, especially for fixed business installations that prioritize predictable connectivity. Wi-Fi is supported on 2.4 GHz and 5 GHz and can help where cabling is impractical. The better choice depends on coverage, network security, VLAN design, maintenance policy and the reliability expected from the access-control system.
Which card type should we specify?
The manufacturer lists 125 kHz ID cards as standard and 13.56 MHz IC cards as optional. If your business already issues badges, identify their technology before purchase rather than assuming compatibility. A migration project may require new cards, dual-credential planning or a different reader strategy, so credential technology should be confirmed with the supplier and installer.
Can we use the video intercom function immediately?
SIP 2.0 is supported, but a complete video-intercom deployment may require compatible indoor endpoints, server or software configuration, network settings and relevant licenses. Treat intercom as a project function rather than an automatic plug-and-play assumption. Confirm which monitor or application will receive calls and how it will integrate with access-control administration.
What should we check when replacing an older terminal?
Record the old model, card technology, mounting arrangement, wiring, lock interface, controller connection, software platform, user database and any attendance functions. Replacement is easier when the new device can fit the existing architecture, but differences in firmware, software support, credential types or mounting may require changes. A model-to-model review is safer than assuming a direct swap.
What accessories may be needed?
Depending on the door, you may need a regulated 12V DC power source, electric or magnetic lock, door sensor, exit button, alarm interface, network cabling, suitable mounting hardware, RFID cards, controller equipment, software licenses or an indoor SIP monitor. The exact list is configuration dependent and should be built from the doorway design.
What information helps FourTeck prepare a better quotation?
Share the number of doors and terminals, expected enrolled users, preferred credentials, existing lock and controller models, network method, software requirement, intercom requirement, installation environment, delivery location and project timeline. If this is an upgrade, include the current ZKTeco model and software version. Clear project data reduces configuration assumptions and improves quote accuracy.
Business Requirements to Match Before You Buy
For businesses that need touch-free credentials
Palm and face recognition can reduce reliance on shared touch points. Decide which biometric should be primary, how exceptions will be handled, and whether card or password fallback is necessary for visitors or contractors.
For sites with a growing user population
The device offers sizeable biometric, card and transaction capacities. Teams planning future growth should calculate enrollment numbers across all sites and confirm how central software will synchronize users and retain events.
For projects using existing door hardware
Buyers integrating with an installed lock, door sensor or controller should provide the exact hardware details. Interface support is broad, but electrical and protocol compatibility must be validated before installation.
For organizations standardizing access management
Support for ZKBio software platforms makes the model relevant to sites that want centralized administration. Confirm which platform best fits access, attendance, security and intercom needs before finalizing licenses.
For buyers replacing legacy badge-only readers
A migration to biometrics changes enrollment, policy and user experience as well as hardware. Confirm existing badge compatibility, retention of card fallback, software migration and how users will be registered.
For protected indoor entry points
The model is designed for wall-mounted access use, but an ingress rating is not listed. Locations exposed to rain, dust or direct outdoor heat require a different environmental assessment and possibly another product or enclosure strategy.
What Buyers Should Check Before Purchase
A strong quotation starts with a complete requirement. The model name alone does not tell a supplier which card reader option, software platform, lock arrangement, power accessory, mounting method or intercom components are needed. Buyers should therefore separate the decision into four areas: identity method, physical door integration, management software and operating environment.
Configuration Fit
Confirm whether users will authenticate by palm, face, card, password or a combination. Review enrollment capacity, transaction retention and whether optional IC-card support is required.
Compatibility Check
Document the existing lock, controller, Wiegand or RS485 requirements, door sensor, exit button, alarm and power supply. Also confirm network and software compatibility.
Availability and Warranty
Ask for current supply status, exact included accessories and warranty terms for the quoted channel. Do not assume the warranty period or stock position from a generic product listing.
Quote Preparation
Provide project quantity, delivery location, required card type, software, intercom need, door hardware, installation environment and expected timeline so the quote reflects the complete requirement.
Long-term use should also be considered. Who will enroll and remove users? How will lost cards be handled? Who will review event logs? Is attendance data required, or only access control? Will the terminal be part of a larger ZKTeco estate? Does the organization have a policy for biometric data and user consent appropriate to its jurisdiction and internal governance? These operational questions can be more important than the headline recognition speed.
For replacement projects, ask whether the older model is being changed because of capacity, software compatibility, maintenance, user experience or new security requirements. The answer determines whether a direct replacement is appropriate or whether the project should be redesigned. FourTeck.com can help compare the requested model with related access-control options and identify configuration questions that should be resolved before purchasing.
UAE Availability and Service Support
FourTeck.com supports business inquiries for ZKTeco access-control products in Dubai and across the UAE. Assistance can include reviewing the model against the project requirement, confirming the requested credential option, preparing a quotation, coordinating delivery requirements, and discussing warranty terms associated with the proposed supply channel. Availability can vary with distributor status, shipment timing, configuration, optional card technology, software licenses and order quantity.
For a single-door request, provide the existing lock type, network method and software expectation. For a multi-door or multi-site project, it is better to send a small schedule showing each location, number of terminals, user estimate, door hardware and management requirement. That makes it easier to identify whether all doors can use the same configuration or whether some areas need readers, controllers or models with different environmental protection.
FourTeck can also help buyers prepare related accessory requirements such as compatible cards, power arrangements, exit buttons, door sensors and access-control components. Warranty guidance is provided based on the actual quoted source and should be confirmed on the commercial offer rather than assumed from a generic specification.
Dubai, Abu Dhabi, Sharjah and Ajman Coverage
Businesses in Dubai, Abu Dhabi, Sharjah, Ajman and other UAE locations can contact FourTeck.com for product availability, quotation support and configuration guidance. The practical requirements can differ by site: a corporate office may need integration with existing badge credentials, a warehouse may require robust door hardware and a protected mounting location, while a hospitality project may place greater emphasis on video intercom and visitor communication. Share the delivery location and project scope so logistics and configuration questions can be addressed together. FourTeck does not assume local stock or delivery speed until the requested quantity and supply channel are confirmed.
GCC and Africa Availability
FourTeck.com also supports business technology inquiries for selected projects across GCC and Africa markets. Organizations in Saudi Arabia, Qatar, Oman, Kuwait and Bahrain, as well as buyers in Kenya, Uganda and other Africa-region markets, can submit project details for sourcing review. Availability, delivery method, warranty handling and software support can vary by country and supplier channel, so regional inquiries are assessed case by case.
For cross-border access-control projects, provide the number of units, destination, required card technology, software platform, power accessories and whether the equipment is for a new installation or a replacement. Project teams should also check local import requirements, installation standards, data-governance obligations and support arrangements applicable to their country.
Regional buyers can start from FourTeck.com or use the relevant regional inquiry channel: FourTeck Kenya, FourTeck Uganda, FourTeck Africa and FourTeck Kuwait. Commercial terms and availability should be confirmed for the destination before purchase.
Other Options Buyers May Consider
The right alternative depends on why you are considering palm recognition. Some projects need a different biometric mix, stronger outdoor protection, QR credentials, a controller-centric architecture or a simpler attendance terminal. Rather than choosing only by model name, compare the credential method, capacity, environmental rating, interface set, management platform and door topology.
ZKTeco SpeedFace Series
Worth reviewing when facial recognition is the primary requirement and the project may need different biometric or QR options depending on the exact model.
ZKTeco SenseFace Series
Suitable for buyers comparing newer ZKTeco facial-recognition terminals with different display sizes, credential combinations or environmental characteristics.
ZKTeco ProFace Options
A useful family to consider for projects that need different face-and-palm designs, capacities or installation requirements.
ZKTeco Access Controllers and Readers
For larger controlled-door architectures, a controller-and-reader design may be more appropriate than using every terminal as a stand-alone door endpoint.
ZKBio Management Software
Consider software requirements at the same time as the hardware so access rules, users, reporting, attendance and intercom functions are licensed and managed correctly.
FourTeck can help compare alternatives when you provide the business objective rather than only a product code. Tell us whether the main concern is touchless access, user capacity, outdoor installation, mobile credentials, video intercom, attendance, replacement compatibility or centralized control. That context makes the comparison more useful.
Why Business Buyers Contact FourTeck
Access-control procurement often involves more dependencies than the visible terminal suggests. A model can have the right biometric technology and still be a poor project choice if the cards, door lock, software, network, power or mounting environment do not match. FourTeck.com approaches the request as a business technology requirement, helping buyers identify the questions that should be resolved before purchase.
Review current channel availability and requested quantities without making unsupported stock promises.
Match credential type, software, door interfaces and accessories to the intended site.
Build a clearer quotation from project quantity, delivery location and technical requirements.
Compare the new terminal with an older ZKTeco model when software, wiring or credentials must be retained.
Coordinate supply requirements after product, quantity and destination details are confirmed.
Explain warranty terms associated with the actual quoted source rather than relying on generic assumptions.
This is especially useful for procurement teams that must obtain commercial approval while technical teams are still defining the system. FourTeck can help keep the discussion anchored to practical questions: What exactly is being supplied? Which functions are standard or optional? What needs a separate license? Which accessories are required? What environmental limits apply? What information must the installer receive? Clear answers reduce avoidable changes later in the project.
Frequently Asked Questions
What is the SpeedPalm-V5L used for?
It is a biometric access-control terminal for verifying users by palm, face, card or password and controlling a connected door. It also supports access rules, event records, networking and SIP 2.0 video intercom. It is best evaluated as part of a complete access-control system that includes door hardware, power, networking and management software.
How fast is palm authentication?
ZKTeco’s current product specification states palm authentication at under 0.35 seconds, with a recognition distance of 5 to 15 cm. Actual user experience also depends on enrollment quality, mounting position, user presentation and system configuration, so deployment planning and clear user guidance remain important.
How many users or credentials can it store?
The current specification lists 10,000 face templates, 15,000 palm templates, 20,000 cards and 200,000 transactions. These capacities are not necessarily the same as a simple count of unique people because a user may have more than one credential. Plan capacity around the actual enrollment model and central management design.
Does the terminal support Wi-Fi?
Yes. The manufacturer lists Wi-Fi supporting IEEE 802.11 a/b/g/n/ac on both 2.4 GHz and 5 GHz, along with a TCP/IP Ethernet interface. Choose the connection method according to site cabling, network security, signal quality and reliability requirements rather than simply using whichever is easiest to install.
Which software can manage the device?
ZKTeco lists ZKBio CVAccess, ZKBio Time and ZKBio CVSecurity as supported software, with ZSmart available as an optional mobile application. The appropriate platform depends on whether the project needs access control, attendance, security management, intercom or a combination. Confirm licensing and version compatibility before purchase.
Can it be installed outdoors?
The current official specification does not list an ingress-protection rating, and the manufacturer’s quick-start guidance recommends indoor installation. Buyers should not assume rain, dust or exposed-weather protection. If the required door is outdoors or exposed to direct heat and sunlight, ask FourTeck to review a more suitable design or protected mounting approach.
Is the 13.56 MHz IC card reader standard?
No. ZKTeco currently lists 125 kHz ID card support as standard and 13.56 MHz IC card capability as optional. If your business already uses MIFARE or another 13.56 MHz credential environment, identify the card technology clearly when requesting a quote so the offered unit can be checked for compatibility.
Can FourTeck help with a multi-door project quotation?
Yes. Send the number of doors, terminal quantities, user estimate, credential types, existing controllers or locks, software requirement, network method, installation environment and delivery location. FourTeck can use that information to review product fit, related accessories and commercial requirements before preparing a quote request.
How do I request current UAE pricing and availability?
Use the FourTeck contact page and include the exact model, required quantity, card option, software needs, destination and any installation or replacement details. Current price and availability can change by supplier channel and configuration, so a project-specific quotation is more reliable than assuming a generic online price applies to the final UAE requirement.
Need Help Planning Your Biometric Access-Control Purchase?
FourTeck.com can help you review model fit, card technology, software, door interfaces, accessory requirements, UAE availability, warranty guidance and delivery details. Share your door count, user estimate and existing access-control environment for a more useful quotation discussion.
