ZKTeco UHF5 Pro Long-Range UHF Reader in Dubai, UAE
Built for contactless identification at vehicle gates, controlled entry points, parking lanes, personnel movement zones, and other access environments, this long-range UHF reader gives project teams a practical way to identify passive UHF credentials without forcing every user to stop and present a card at very close range. The UHF5 Pro combines a 9 dBi antenna, selectable reading modes, Wiegand or RS485 communication, USB-based parameter configuration, and an IP66 enclosure. ZKTeco states a 2 to 8 metre reading distance in handheld testing, while actual scenario testing is around 4 metres, making correct installation, tag selection, lane geometry, controller design, and RF tuning important to the final result.
Request QuoteAsk for Configuration Support
Quick Product Information
| Brand | ZKTeco |
| Model | UHF5 Pro |
| Product Type | Long-range passive UHF RFID reader |
| Primary Use | Vehicle management and personnel identification applications |
| Reading Distance | 2–8 m handheld test; actual scenario test around 4 m |
| Antenna Gain | 9 dBi |
| Frequency Versions | E: 865–868 MHz; F: 902–906 MHz adjustable |
| Communication | Wiegand, RS485, USB for parameter configuration; Wiegand or RS485 is selected according to the required interface option |
| Protocol | EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C |
| Protection | IP66 |
| Power | DC 9–15 V; 1.2–4.2 W |
| Buyer Action | Confirm frequency, credential type, interface, installation geometry, controller compatibility, power, mounting, and quantity before quotation |
Buyer Snapshot: Is This Reader a Good Fit?
Busy project teams usually need a fast answer before studying every specification. The UHF5 Pro is most relevant when a project needs passive UHF credentials to be read from a greater distance than conventional proximity cards, especially at controlled vehicle lanes and selected personnel access points. The final fit depends on the credential, mounting height, direction of travel, controller input, surrounding RF conditions, lane width, power source, weather exposure, and the desired trigger logic.
Parking entrances, gated facilities, staff vehicle access, warehouse yards, campuses, and selected personnel identification points.
Passive tags can be detected without a user presenting the credential directly against the reader.
Frequency version, tag format, read zone, controller interface, installation position, power, and environmental exposure.
Requirement review, product selection guidance, accessory planning, quotation support, and UAE delivery coordination.
Product Overview
A long-range UHF reader changes how an access point can be designed. Instead of requiring every driver or staff member to stop, lower a window, reach for a card, and present it near a conventional reader, a passive UHF credential can be detected from farther away when the installation is correctly engineered. This can reduce unnecessary handling at parking gates and other controlled approaches. The UHF5 Pro is designed for that role. ZKTeco positions it for vehicle management and personnel management, with a directional antenna, adjustable output power, two reading modes, communication choices for access-control integration, and an enclosure rated for outdoor environmental protection.
The published reading-distance figure should be treated as a planning reference rather than a promise that every site will achieve the maximum distance. ZKTeco differentiates between handheld test range and an actual scenario result, stating 2 to 8 metres in handheld testing with an actual scenario test around 4 metres. Real installations are affected by the UHF tag, tag position, windshield or vehicle material, approach angle, reader orientation, nearby metal, reflective surfaces, interference, output-power setting, mounting height, trigger method, and the controller logic that decides what happens after a credential is read. A strong project therefore begins with site conditions, not with the maximum number on a datasheet.
For UAE businesses, the reader can fit parking control at offices, warehouses, logistics compounds, gated communities, campuses, staff facilities, industrial sites, hospitality back-of-house areas, and controlled service entrances. It may also be useful for personnel identification where a passive UHF credential and a deliberately defined read zone make operational sense. Buyers should confirm the local frequency version and the rest of the access ecosystem before ordering. The reader is only one part of a complete solution; credentials, controller inputs, barrier logic, mounting hardware, power, cabling, software, and commissioning all influence the result.
FourTeck.com can help procurement teams translate a site requirement into a clearer bill of materials. Instead of selecting only by model name, buyers can share the lane layout, expected credential type, desired read distance, controller model, barrier or door equipment, power availability, installation environment, quantity, and project schedule. That information makes it easier to determine whether the UHF5 Pro is suitable or whether a different reader range, antenna pattern, accessory set, or system design should be considered.
Key Business Benefits
More Convenient Credential Reading
A longer reading zone can make controlled vehicle entry smoother because the credential can be recognized without requiring the driver to move a card close to a short-range reader. This is valuable where the operational goal is controlled access with less manual interaction. The site still needs correct lane geometry and tag placement so the read zone remains predictable.
Flexible Integration Choices
Wiegand and RS485 give integrators different ways to connect the reader to an access-control environment, while USB is used for parameter configuration. This flexibility matters when a project must work with an existing controller architecture. Buyers should confirm the required interface option before purchase because the implementation is configuration dependent.
Outdoor Deployment Readiness
The IP66 protection level supports installations exposed to dust and water ingress conditions when the reader is mounted and cabled correctly. This can suit parking entrances, perimeter gates, industrial compounds, loading areas, and other outdoor access locations. The complete installation still needs suitable cable protection, sealing, power arrangements, brackets, and site-specific environmental planning.
Selectable Reading Behaviour
The reader supports continuous reading as the default mode and trigger-based reading. That allows system designers to choose between an always-active read zone and a controlled reading event initiated by a trigger condition. Trigger logic can be useful when a project needs to limit unnecessary reads, coordinate with a barrier sequence, or define a more controlled operational workflow.
Standards-Based Passive UHF
Support for EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C gives buyers a recognized UHF credential standard to plan around. That can simplify tag sourcing and system design, but it does not remove the need to test the chosen credential form factor. Windshield tags, cards, labels, and other passive tags can behave differently depending on orientation and the material around them.
Visible Reading Feedback
The reader includes a seven-colour LED indicator for read status. Visual feedback can help during commissioning and day-to-day operation because technicians and users can see that the device has registered an event. The exact meaning assigned to colours and system reactions should be aligned with the final configuration and access-control workflow.
Product Highlights
The UHF5 Pro is a focused reader rather than an all-in-one access terminal. That distinction matters. Its job is to energize and read compatible passive UHF credentials in a defined area, then pass credential information into the surrounding system through the selected communication method. Project teams should therefore evaluate it as part of a complete entrance-control design rather than expecting the reader alone to manage users, operate a barrier, store business rules, or provide every function found in a standalone access terminal.
- 2–8 m published handheld-test range: useful for planning long-range identification, with ZKTeco noting an actual scenario result around 4 m.
- 9 dBi antenna gain: supports a focused UHF read zone, but installation angle and surrounding materials still affect practical coverage.
- 19–30 dBm output power: allows output adjustment during commissioning so the read zone can be tuned to the site instead of simply operating at maximum power.
- Continuous or triggered operation: supports different entrance workflows and can help control when reading occurs.
- Wiegand and RS485 communication: provides options for integration with compatible controllers; the required version and interface should be confirmed before order.
- IP66 protection: supports outdoor use when the reader, connectors, cabling, mounting, and power components are installed appropriately.
- Compact panel format: at approximately 308.5 × 308.5 × 67.5 mm and 1.8 kg, the reader can be planned into gate posts, walls, pedestals, or dedicated structures where mounting geometry supports the intended read zone.
Technical Specifications
| Specification | UHF5 Pro Details |
|---|---|
| Brand / Model | ZKTeco UHF5 Pro |
| Reader Type | Passive UHF RFID reader for vehicle and personnel management applications |
| Reading Distance | 2 to 8 metres in handheld testing; actual scenario testing around 4 metres |
| Antenna Gain | 9 dBi |
| Frequency | E: 865 MHz–868 MHz; F: 902 MHz–906 MHz adjustable |
| RFID Protocol | EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C |
| Working Mode | Read Always by default; Read by Trigger |
| Communication Interface | Wiegand, RS485, USB for configuration parameters; Wiegand/RS485 interface selection is configuration dependent |
| Wiegand Output | Different Wiegand data outputs supported; Wiegand 26 is default |
| RS485 Baud Rate | 9600, 19200, 38400, 57600, 115200; default 115200 |
| Output Power | 19 dBm–30 dBm |
| Working Voltage | DC 9–15 V |
| Power Consumption | 1.2–4.2 W |
| Protection Level | IP66 |
| Dimensions | 308.5 × 308.5 × 67.5 mm |
| Weight | 1.8 kg |
| Working Temperature / Humidity | -20°C to 65°C; less than 85% RH |
| Storage Temperature / Humidity | -20°C to 80°C; less than 85% RH |
| Compliance Notes | ZKTeco states the product meets CE and FCC technical requirements |
When choosing the correct configuration, start with the country frequency requirement, then work outward to the credential and controller. The reader must match the intended UHF band, the chosen passive tags must operate correctly in that band, and the controller must accept the selected Wiegand or RS485 arrangement. After those fundamentals are confirmed, the integrator can plan mounting height, direction, cable path, trigger input, output power, and lane sequence. The goal is not simply to maximize range. A well-tuned access lane reads the intended credential reliably while minimizing unwanted reads from adjacent lanes, nearby vehicles, or people outside the authorized approach.
Configuration and Buyer Guidance
A successful UHF access project depends on more than selecting a reader model. Before requesting a quotation, buyers should describe what should happen from the moment a credential enters the detection zone to the moment the barrier, gate, or access controller makes a decision. That workflow helps determine whether continuous reading or triggered reading is more appropriate and whether additional sensors, controllers, barrier equipment, or software are required.
What is being identified?
Specify whether the credential will be on a windshield, vehicle body, access card, badge, asset, or another passive UHF form factor. Tag type and placement can change practical read performance.
What read zone is required?
Share the lane width, mounting position, approximate target distance, direction of approach, and whether adjacent lanes or nearby pedestrian areas must be excluded from the read zone.
Which controller will receive the data?
Confirm controller model, input type, Wiegand requirements, RS485 expectations, credential format, and any software rules that convert a read event into access permission.
How will the reader be powered and mounted?
Plan a suitable DC 9–15 V supply, cable route, weather protection, bracket or support structure, grounding practices where relevant, and service access for future adjustments.
Also confirm whether the project needs spare tags, mounting hardware, vehicle loop or sensor integration, barrier-gate equipment, access-control panels, software configuration, installation, testing, or handover documentation. If the reader is replacing an older UHF model, provide the existing frequency, controller interface, credential type, cable arrangement, and measured lane behavior. FourTeck.com can use these details to help prepare a more accurate product and accessory recommendation instead of treating the reader as an isolated component.
Ideal Business Use Cases
Staff Parking and Office Gates
Companies can issue passive UHF vehicle credentials to approved staff and use the reader as part of a barrier-control workflow. This can reduce the need for drivers to lower windows or present a card at close range. The integrator should control lane width, tag position, read-zone direction, and barrier timing so authorized vehicles are recognized consistently without unnecessary reads from nearby traffic.
Warehouse and Logistics Compounds
At warehouses, distribution yards, and service compounds, passive UHF identification can support controlled entry for registered company vehicles, contractors, or approved service traffic. The reader can provide the credential event while the access platform applies business rules. Sites should consider large metal vehicles, tag placement, multiple lanes, gate geometry, dust exposure, and how the access system records entries.
Campus and Institutional Vehicle Access
Schools, clinics, staff campuses, residential compounds, and other managed properties may use long-range UHF credentials for approved vehicles. The model can be appropriate when the project needs a straightforward passive RFID read event that connects to a compatible access controller. The system designer must still decide how visitors, unregistered vehicles, exceptions, and lost credentials are handled.
Industrial and Service Entrances
Industrial sites often have controlled perimeter gates where staff, maintenance vehicles, forklifts, or approved service traffic follow repeatable routes. A defined UHF read zone can support that workflow when passive tags are suitable for the environment. Mounting strength, cable protection, weather exposure, metal surroundings, and the need for trigger sensors should be reviewed during design.
Selected Personnel Identification Points
ZKTeco also positions the reader for personnel management. This can be useful where people carry passive UHF credentials and the project intentionally wants detection from a wider zone than a conventional proximity reader. Because longer-range personnel reading can capture unintended nearby credentials, placement and workflow should be carefully designed around the actual movement path.
Replacement of Older Long-Range Readers
The UHF5 Pro may be considered when updating an older UHF reader installation, but replacement should not be assumed to be plug-and-play. The existing frequency, tags, Wiegand format, RS485 arrangement, mounting dimensions, power supply, cabling, read range, and controller behavior should be documented first. A controlled test is the safest way to verify the replacement design before a wider rollout.
ZKTeco UHF5 Pro Reading Range and RF Control
Reading range is the feature most buyers notice first, but it is also the specification most likely to be misunderstood. ZKTeco gives the UHF5 Pro a 2 to 8 metre handheld-test range and notes that its actual scenario test is around 4 metres. This tells project teams two important things. First, the reader can operate well beyond conventional proximity-card distances. Second, the maximum laboratory or handheld figure should not be treated as a guaranteed lane result. Long-range UHF is an RF system, and the site becomes part of the antenna environment.
A windshield tag placed consistently on similar vehicles may behave differently from a loose card carried by a person. Metallic films, vehicle bodywork, tinted glass, nearby fences, concrete structures, steel gates, reader angle, tag orientation, and even the direction of travel can influence the energy that reaches the passive tag and the signal that returns to the reader. That is why practical deployments focus on repeatable reading rather than simply the greatest possible distance. Too much read range can be undesirable if the reader starts identifying credentials in an adjacent lane or before a vehicle reaches the correct decision point.
The adjustable 19–30 dBm output power gives commissioning teams a tool to shape the result. Output can be tuned together with reader angle, mounting height, and the chosen credential. If the project uses trigger mode, a vehicle detector, access event, or other trigger logic can further define when the reader should actively seek tags. The best configuration is the one that reliably covers the intended zone while avoiding unnecessary detections. FourTeck.com can help buyers prepare the product and accessory requirements, but final RF tuning should be carried out against the actual site conditions and credential set.
ZKTeco UHF5 Pro Controller Integration and Working Modes
An RFID reader only becomes useful when its credential data reaches a system that can act on it. For the UHF5 Pro, ZKTeco lists Wiegand and RS485 as communication interfaces, with USB used for parameter configuration. The selection should be made according to the controller, cable design, credential format, software architecture, and the experience of the integrator. Wiegand remains common in access control because many controllers accept card data over a simple reader interface. RS485 can be useful in designs that expect serial communication and defined baud-rate settings. ZKTeco lists selectable RS485 rates from 9600 through 115200, with 115200 as the default.
The reader supports multiple Wiegand data outputs and uses Wiegand 26 by default. That detail should be checked carefully when an existing controller, database, or credential numbering scheme expects another format. A reader may physically detect a tag yet still fail to produce the desired access result if the controller interprets the data differently. Procurement teams replacing an older reader should therefore capture the current Wiegand format, facility-code conventions where applicable, tag numbering, and software mapping before changing hardware.
Working mode is another practical choice. Read Always is the default and keeps the reader continuously monitoring for credentials. Read by Trigger allows the system to initiate reading based on another event. A parking project may prefer trigger logic so the read sequence starts when a vehicle reaches a specific point, while another project may prefer continuous operation for a simple controlled zone. There is no universal best mode. The right approach depends on traffic flow, adjacent read areas, barrier timing, safety devices, controller response, and how duplicate or repeated tag reads are handled by the software.
ZKTeco UHF5 Pro Outdoor Deployment and Installation Planning
IP66 protection makes the reader suitable for many outdoor access environments, but a complete outdoor installation is only as reliable as its weakest component. The reader enclosure may resist dust and water ingress to its specified level, yet cable joints, connectors, power supplies, junction boxes, mounting plates, conduits, and controller enclosures also need protection appropriate to the site. A parking-lane reader mounted under an open sky has different exposure from one placed under a covered entrance, and both installations may face heat, dust, vibration, accidental impact, or cleaning water.
Mounting position deserves particular attention because it affects both physical protection and RF performance. The front of the antenna should face the intended credential path at an angle that creates a useful read zone. The structure must be rigid enough to prevent movement that changes the antenna direction over time. In vehicle applications, the mounting height and lateral offset should be chosen around the tag position, usually with a controlled test using the actual vehicle credential. Where multiple lanes are close together, integrators may need more conservative power settings or different reader angles to reduce cross-lane reads.
Power planning should use the specified DC 9–15 V operating range and account for cable length, voltage drop, service access, and protection against unsuitable supplies. Cabling for Wiegand or RS485 should follow the controller manufacturer’s recommendations and the site’s electrical practices. The reader’s 1.8 kg weight and panel dimensions should be considered when selecting a bracket or pedestal. Before handover, technicians should test different vehicle positions, approach speeds appropriate to the gate, credential placements, wet and dry conditions where practical, and exception cases such as tailgating or two vehicles entering the read zone together.
What Should You Know Before Choosing This UHF Reader?
The questions below mirror the practical decisions that security managers, installers, procurement teams, facilities departments, and project consultants usually face before approving a long-range RFID reader. They are intended to help buyers define the requirement clearly enough to avoid mismatched frequencies, unsuitable tags, uncontrolled read zones, or controller-integration problems.
Who is the UHF5 Pro best suited for?
It is best suited to projects that need passive UHF credentials read from several metres away, especially controlled vehicle entrances and carefully planned personnel-identification areas. Typical buyers include facilities teams, security integrators, parking-system contractors, industrial sites, warehouses, campuses, commercial properties, and organizations replacing an older long-range reader. It is not a complete access system by itself, so the surrounding controller, software, barrier or door hardware, credentials, power, and cabling must also be planned.
Can I expect the full 8-metre reading distance on site?
Not automatically. ZKTeco states 2–8 metres for handheld testing and around 4 metres in its actual scenario test. Practical range changes with tag quality, tag orientation, windshield or mounting material, reader angle, output power, environmental reflections, nearby metal, interference, and the approach path. Buyers should specify the distance they actually need and plan a site test with the intended credentials rather than designing around the maximum published number alone.
Which frequency version should a UAE buyer choose?
The project must use a frequency version suitable for the local regulatory environment and the selected credentials. ZKTeco lists an E version operating at 865–868 MHz and an F version at 902–906 MHz with adjustment. Before ordering, confirm the required band for the deployment, then make sure the UHF tags are designed for the same range. FourTeck.com can help buyers identify the version to request, but the final project should follow applicable local radio requirements.
Will it work with my existing access-control panel?
It may, provided the controller supports the selected reader interface and the credential data format matches the system design. The UHF5 Pro supports Wiegand and RS485, with Wiegand 26 used by default and other Wiegand data outputs supported. Buyers should provide the existing controller model, reader port specification, Wiegand format, tag numbering method, software platform, and cable details before assuming compatibility. A bench test is recommended when replacing an older reader or integrating into a legacy system.
Should I use continuous reading or trigger mode?
Choose the mode based on how tightly the read event must be controlled. Read Always keeps the reader active and can suit a simple defined zone. Read by Trigger can be preferable when a vehicle detector, barrier sequence, controller signal, or other event should decide when reading begins. Triggering can help reduce unnecessary reads around adjacent traffic, but it adds another design element. The correct choice depends on the lane layout, traffic pattern, controller logic, and exception handling.
Which tags should be purchased with the reader?
Use passive EPC Gen2 / ISO 18000-6C credentials that suit the selected frequency band and the physical mounting method. Vehicle windshield tags, adhesive labels, hard tags, and cards can perform differently because of antenna design and surrounding materials. For a vehicle project, test the intended tag on the actual windshield or mounting surface. Procurement teams should not buy a large quantity of tags until the chosen credential has been validated with the reader and site geometry.
What should be checked when replacing an older UHF reader?
Document the old frequency, tags, Wiegand or RS485 interface, credential data format, power supply, mounting position, cable length, bracket, lane width, controller model, and typical reading behavior. Replacement is not only about physical dimensions. A new reader can change the RF zone or output format even when it connects to the same controller. The safest process is to test the new reader with existing credentials and software before replacing multiple units across a site.
What accessories might the project require?
Common project items can include compatible passive UHF tags, a suitable mounting bracket or pedestal, DC power supply, protected junction box, conduit, controller, barrier-gate interface, trigger sensor, cable, software configuration, and spare credentials. The exact bill of materials depends on the site and controller architecture. Ask for the reader together with the complete access workflow so the quotation can include the items needed for installation rather than only the core device.
What information should I send FourTeck.com for a more accurate quote?
Share the quantity, deployment location, required frequency, vehicle or personnel use case, approximate read distance, tag type, lane or doorway layout, controller model, preferred interface, power availability, mounting requirement, outdoor exposure, and whether you need related barrier, access-control, installation, or configuration items. For replacement projects, include photos and the existing reader/controller details. This helps FourTeck.com recommend the right version and avoid a quote that leaves out important project components.
Business Requirements to Match Before You Buy
For businesses that need contactless vehicle entry
A passive UHF setup can reduce close-range card presentation at controlled gates. Match the reader with a validated windshield or vehicle tag, a compatible access controller, and a lane design that gives the driver a clear stopping and decision point.
For sites replacing a short-range reader
Moving from proximity reading to UHF changes the physical access workflow. Buyers should review credential issuance, lost-tag procedures, anti-passback rules where used, lane geometry, controller format, and the possibility of reading tags before they reach the gate.
For multi-lane entrances
Adjacent lanes require careful RF planning. Reader angle, output power, trigger logic, tag placement, and lane spacing should be tested so each reader focuses on its intended approach and does not create confusing cross-lane credential events.
For outdoor parking and industrial environments
The IP66 reader enclosure supports outdoor projects, but the mounting structure, connectors, cabling, power supply, and junction boxes must also suit the environment. Heat, dust, vibration, cleaning water, and accidental impact should be considered during installation planning.
For procurement teams standardizing several sites
Standardization works best after a pilot validates the frequency, credential, controller format, read distance, mounting method, and software behavior. Once those variables are proven, the same bill of materials and configuration approach can be documented for repeat deployments.
For projects that require future serviceability
Plan access to the reader, power supply, controller, cabling, and configuration port so technicians can test or retune the installation later. Record the final output power, interface format, tag type, mounting angle, and controller settings as part of the handover documentation.
What Buyers Should Check Before Purchase
Long-range RFID projects can fail for small reasons that are easy to miss at purchasing stage: the wrong frequency version, a tag that performs poorly on the intended surface, a Wiegand format that does not match the controller, a mounting position that reads the next lane, or a quote that includes the reader but not the power, brackets, credentials, and interface components. A structured pre-purchase review helps reduce those risks.
Correct Version
Confirm whether the project requires the E or F frequency range and make sure the selected passive credentials operate in the same band. Regulatory suitability should be checked for the installation country.
Controller Compatibility
Provide the access-controller model and required reader interface. Verify Wiegand format or RS485 details, credential numbering, software mapping, and cable requirements before purchase.
Read-Zone Design
Define where the credential should first be detected and where it should not be detected. Consider adjacent lanes, pedestrians, parked vehicles, metal barriers, windshield film, and the tag’s mounting orientation.
Complete Bill of Materials
Ask whether the quotation includes tags, power supply, bracket or pedestal, junction box, cabling, trigger device, controller, barrier interface, software, installation, and commissioning where required.
Buyers should also clarify warranty expectations, replacement lead-time concerns, spares strategy, and whether the project needs a test unit before a larger rollout. Availability can change by model version and quantity, so request current commercial confirmation rather than assuming stock from an older listing. If several sites will use the same reader, build a repeatable deployment standard that documents mounting dimensions, power source, cable type, interface settings, output power, tag position, trigger behavior, controller programming, and acceptance-test results. This can reduce later support effort and make future replacements easier.
For quotation preparation, send FourTeck.com the reader quantity, site location, expected traffic flow, photos or drawings of the lane, target reading point, controller details, credential preference, frequency requirement, power availability, installation scope, and any barrier-gate or access-control components already selected. When those details are available, the product decision becomes much more reliable than choosing only by advertised distance or unit price.
UAE Availability and Service Support
FourTeck.com supports business inquiries in Dubai and across the UAE for access-control, vehicle-management, RFID, surveillance, networking, and related business technology products. For the UHF5 Pro, the useful commercial conversation starts with the exact version and project scope. Buyers can request current availability, quantity-based quotation support, compatible accessory guidance, delivery coordination, and warranty information based on the supply channel available at the time of order.
Availability should not be assumed from the model name alone. UHF products can differ by frequency band, communication requirement, supplied accessories, and regional configuration. Project quantities may also affect sourcing time. FourTeck.com can help check the requested version against the buyer’s frequency, controller, credential, and installation requirements before a commercial offer is prepared. This reduces the risk of receiving a reader that is technically similar but unsuitable for the specific system.
For installation planning, buyers can also ask for guidance on related items such as passive UHF credentials, access-control panels, barrier-gate interfaces, protected power supplies, mounting hardware, junction boxes, cable, trigger sensors, and other project components. Warranty terms depend on the actual supply source and should be confirmed on the quotation or order documentation. To receive a useful response, include the site location, required quantity, controller model, target reading distance, frequency version, tag type, and whether the request is supply-only or part of a larger access project.
Dubai, Abu Dhabi, Sharjah and Ajman Coverage
Businesses in Dubai, Abu Dhabi, Sharjah, Ajman, and other UAE locations can contact FourTeck.com for product availability, configuration guidance, quote assistance, and delivery coordination. For a long-range RFID project, share the site type, number of entrances, controller details, target read distance, tag requirement, installation environment, and quantity. FourTeck.com can then help review whether the requested reader and related access-control components match the business requirement. Delivery options, warranty handling, installation scope, and lead time depend on the selected products, supplier conditions, and project location and should be confirmed during quotation.
Regional Availability for GCC and Africa Projects
FourTeck.com also supports business technology inquiries for selected projects across Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Kenya, Uganda, and other Africa-region markets through its regional inquiry channels. Long-range RFID equipment is particularly sensitive to local frequency rules and the credential band used at the site, so a regional request should identify the country before the reader version is selected. Availability, delivery method, warranty handling, taxes, import requirements, and installation support can vary by market and must be confirmed for each quotation.
Regional integrators and procurement teams should send the required quantity, destination country, intended application, controller model, tag type, frequency requirement, and any associated access-control or barrier equipment. For multi-country rollouts, do not assume a single reader version or credential can be deployed everywhere without checking local requirements. A standard project template can still be used, but the RF band, power supply, mounting, documentation, logistics, and support arrangements should be verified country by country.
Useful FourTeck regional channels include FourTeck.com, FourTeck Kuwait, FourTeck Kenya, FourTeck Uganda, and FourTeck Africa. These links can be used to route project enquiries to the most relevant regional channel.
Other Options Buyers May Consider
Long-range RFID readers should be selected around the required read zone, not just model family. ZKTeco offers related UHF and access-control products that may suit projects needing a different distance, a standalone terminal, or a broader entrance-control design. FourTeck.com can help compare the requirement before a final model is chosen. For a wider security-system view, buyers can also explore CCTV and access control systems for UAE projects.
ZKTeco UHF10 Pro
A related reader for projects that need a longer published reading range. ZKTeco lists 10–20 m handheld testing and around 8 m in an actual scenario, with a larger 12 dBi antenna. Site testing remains essential.
ZKTeco UHF5 Series
An earlier UHF reader family that may appear in installed bases. Buyers replacing these readers should compare interface, tag performance, frequency, mounting, and commissioning behavior before selecting a newer model.
ZKTeco U2000
A standalone UHF access-control terminal can be relevant when a project needs more on-device access functionality than a reader connected to a separate controller. Exact suitability depends on the system architecture.
Barrier and Vehicle Access Components
Many UHF projects also require a barrier gate, controller, safety device, sensor, power supply, mounting structure, and access software. Selecting these as one system can prevent interface gaps.
The best alternative is not always the model with the greatest range. A shorter read zone can be easier to control at a compact gate, while a longer-range model can be useful on a wider approach. Standalone terminals may reduce dependence on a separate access panel in some architectures, while reader-only designs can fit organizations that already have a centralized controller platform. Share the full entrance workflow with FourTeck.com so product comparison focuses on operational fit rather than one specification.
Why Buyers Choose FourTeck.com for Business Technology Projects
A reader purchase can look simple until the project reaches installation. FourTeck.com approaches business technology requests by asking what the product must do in the real environment, what it has to connect to, and what information procurement needs before issuing an order. For UHF access projects, this means reviewing the reader together with the credential, controller, power, mounting, cabling, lane design, barrier logic, and project location.
Help sourcing products and related components for single-site, multi-site, replacement, and project-based requirements.
Practical review of model version, interfaces, accessories, compatibility factors, and information needed before a quote.
Commercial coordination based on the confirmed model, quantity, delivery location, supplier status, and project schedule.
Warranty details are checked against the actual supply source and order terms rather than assumed from unrelated listings.
Buyers can share existing equipment details so replacement recommendations consider interfaces, mounting, credentials, and operational behavior.
Project requests can be coordinated for UAE and selected regional markets where frequency, logistics, and support requirements may differ.
This approach is especially useful for procurement teams that want a defensible purchase decision. Instead of choosing only from a product title or advertised maximum distance, the buyer can document the use case, integration points, environmental needs, commercial terms, and acceptance criteria. That makes quotations easier to compare and reduces the chance of discovering missing accessories or compatibility issues after delivery.
Frequently Asked Questions
What is the ZKTeco UHF5 Pro used for?
It is a passive UHF RFID reader intended for vehicle-management and personnel-management applications. In a vehicle-access design, it can read a compatible UHF credential from several metres away and pass credential data to a controller. The controller and software then apply the access rules. It can also be used at selected personnel identification points where a wider read zone is operationally appropriate.
How far can the UHF5 Pro read a tag?
ZKTeco specifies a 2 to 8 metre reading distance in handheld testing and notes that an actual scenario test is around 4 metres. Real range depends on the passive tag, frequency, tag orientation, mounting surface, reader angle, output power, nearby metal, interference, and lane geometry. Buyers should design around a tested site requirement rather than assuming the maximum value will be achieved in every installation.
Is the reader suitable for outdoor installation?
The reader is rated IP66, which supports many outdoor deployments when it is installed correctly. The complete installation also needs suitable weather protection for connectors, cable joints, power supply, junction boxes, and other components. Mounting structures should be rigid and positioned to protect the reader while maintaining the intended RF angle and read zone.
Can FourTeck.com help confirm controller compatibility?
Yes. Share the controller model, reader-port type, Wiegand requirements or RS485 settings, software platform, existing tag details, and the intended access workflow. FourTeck.com can help review the commercial and configuration requirement before quotation. For legacy systems or unusual integrations, a bench test with the actual controller and credential is recommended before a larger order.
Does the UHF5 Pro support Wiegand 26?
Yes. ZKTeco states that the reader supports different Wiegand data outputs and uses Wiegand 26 by default. Buyers should still confirm the exact format expected by their controller and software. A mismatch in credential formatting can cause integration problems even when the reader successfully detects a tag, so the data path should be checked during commissioning.
What power supply does it require?
ZKTeco specifies a DC 9–15 V working voltage and 1.2–4.2 W power consumption. The installer should select a suitable regulated supply and account for cable length, voltage drop, protection, service access, and the needs of any other connected access-control components. Power arrangements should follow the controller and site electrical requirements rather than being selected only from the reader’s nominal voltage.
Is the UHF5 Pro available in Dubai and the UAE?
FourTeck.com can assist with current UAE availability and quotation requests. Availability may vary by frequency version, quantity, supplier status, accessories, and project timing. Because UHF readers can be region-specific, the requested frequency and credential band should be confirmed before the order is placed. Contact FourTeck.com with the quantity and site requirement for an up-to-date commercial response.
Can businesses request bulk or multi-site supply?
Yes, project and bulk enquiries can be reviewed based on quantity, version, destination, rollout plan, and related accessories. For multi-site projects, it is wise to validate one reference installation first and document the final reader settings, tag type, mounting method, controller interface, and acceptance criteria. That creates a consistent standard for later sites and reduces variation during deployment.
How do I request a quote from FourTeck.com?
Use the FourTeck.com contact page and provide the model, quantity, delivery location, frequency requirement, intended vehicle or personnel use case, controller model, expected reading distance, tag type, and whether you also need mounting, power, barrier, access-control, or installation items. The more complete the requirement, the easier it is to prepare a quotation that reflects the actual project instead of only the reader unit.
Need Help Planning a Long-Range RFID Access Project?
FourTeck.com can help you review the reader version, passive UHF credentials, controller interface, mounting, power, accessories, UAE availability, warranty guidance, and delivery requirements. Share the site layout and access workflow so the quotation reflects the complete requirement.
