ZKTeco X10 Fingerprint RFID Access Control Terminal in Dubai, UAE
Designed for controlled doors where simple local authentication and connected management need to work together, the X10 combines fingerprint recognition, dual-frequency RFID and PIN entry in a slim wall-mounted terminal. Its IP66-rated zinc-alloy body, broad operating-temperature range and direct interfaces for common door hardware make it a practical choice for offices, staff entrances, service areas, stores, warehouses and other business access points. FourTeck.com helps buyers review the door hardware, credential type, mobile-app requirements and installation environment before quotation so the selected setup matches the real site requirement.
Quick Product Information
ZKTeco
X10
Standalone fingerprint and RFID access control terminal
Fingerprint, card and password/PIN
500 users, 500 cards, 500 fingerprint templates
125 kHz ID and 13.56 MHz IC cards
2.4 GHz Wi-Fi, Bluetooth 5.0 and Wiegand input
ZKBio Zlink mobile application
IP66 waterproof and dustproof rating
Wall mount; door hardware planned separately as required
Contact FourTeck.com for current options
Share door type, lock type, credential preference and site location for quotation
Buyer Snapshot: Is the X10 a Good Fit?
Single-door or focused access points that need local fingerprint, card or PIN verification without a large control-panel architecture.
Three verification methods, dual-frequency card support and app connectivity provide flexible everyday access for staff and authorized users.
Confirm electric-lock type, power supply, exit-button requirement, door sensor, card technology, Wi-Fi coverage and installation surface.
The standard platform supports 500 users, cards and fingerprint templates, so larger populations may require a different design.
IP66 protection helps with dust and water exposure, but correct mounting, cable protection and power design remain essential.
FourTeck.com can help map the terminal to compatible door components, deployment requirements and UAE procurement needs.
Product Overview
Modern access control projects often fail for a simple reason: the door terminal is chosen before anyone defines how people will actually authenticate, how the lock will be powered, whether the site has reliable wireless coverage, or how administrators will manage users after installation. The X10 addresses a useful middle ground. It is a standalone terminal that combines fingerprint recognition, RFID credentials and numeric passwords in a narrow wall-mounted format, while also supporting connected operation through Wi-Fi, Bluetooth 5.0 and the ZKBio Zlink mobile application.
For a business buyer, this means one access point can serve different user groups without forcing everyone onto the same credential. Permanent staff can use fingerprints, contractors can be issued cards where appropriate, and selected users can use password access according to the organization’s policy. The device supports both 125 kHz ID cards and 13.56 MHz IC cards, which can reduce migration friction where different credential technologies exist. Buyers should still confirm the exact card format already deployed, because frequency compatibility does not automatically guarantee compatibility with every encoded credential or existing access-control system.
The X10 is built around a standard capacity of 500 users, 500 cards and 500 fingerprint templates. This makes it attractive for smaller offices, departmental entrances, stock rooms, workshops, clinics, retail back areas, maintenance locations and other controlled doors where the user population is known and manageable. It is not automatically the right answer for a high-density campus or a large multi-door enterprise deployment; those environments may benefit from centralized controllers and higher-capacity terminals. FourTeck.com can help buyers compare the size of the user database, number of controlled doors, remote-management expectations and expansion plans before the quotation stage.
For Dubai and UAE installations, the hardware environment matters as much as the terminal itself. The IP66-rated zinc-alloy housing and specified operating range of -25°C to 60°C provide a strong base for protected outdoor or demanding indoor locations, but cabling, power, lock selection, mounting surface and exposure to direct weather should all be reviewed as part of the complete door solution. The goal is not simply to buy a biometric reader; it is to create a dependable entry point that behaves correctly during daily use, staff changes, access revocation and routine maintenance.
Key Business Benefits
◆ Flexible User Verification
Fingerprint, RFID and PIN authentication let businesses choose methods that fit different roles rather than forcing every employee, visitor or contractor into one workflow. This flexibility is especially valuable where operational convenience and controlled access must coexist.
◆ Dual-Frequency Card Support
Support for 125 kHz and 13.56 MHz card technologies gives procurement teams more room when standardizing credentials or replacing an older access point. Existing card technology should still be checked before purchase to avoid assuming compatibility from frequency alone.
◆ Connected Administration
Wi-Fi, Bluetooth 5.0 and ZKBio Zlink support help authorized administrators work with a connected access-control workflow. Remote unlocking through the supported app can be useful where an approved person needs to grant access without physically reaching the door.
◆ Outdoor-Ready Construction
The zinc-alloy body and IP66 ingress-protection rating provide a more robust physical platform for exposed access points. For the buyer, this can reduce the need to restrict deployment only to clean, climate-controlled interior spaces, although installation quality remains critical.
◆ Practical Door Interfaces
Dedicated connections for an electric lock, door sensor, exit button and doorbell help the terminal participate in a complete single-door design. Buyers can plan the required peripherals from the beginning instead of treating the terminal as an isolated device.
◆ Fast Everyday Authentication
ZKTeco specifies fingerprint verification below 0.3 seconds. In a properly enrolled system, quick matching can support smoother staff entry and reduce hesitation at a controlled door, especially during repeated daily use.
The overall value comes from combining these capabilities in one terminal. A buyer does not need to select the X10 merely because it has several features; the stronger reason is that those features can simplify a defined door requirement. The right deployment should begin with user count, credential policy, door hardware, power and management needs. FourTeck.com can help translate those business requirements into a practical bill of materials before purchase.
Product Highlights
The terminal accepts fingerprint, card and password credentials, allowing organizations to build a usage policy around different staff groups and operational scenarios.
The published standard capacity covers 500 users, 500 cards and 500 fingerprint templates, which is appropriate for many small and medium controlled-door applications.
Transaction storage is described as cloud synchronization through ZKBio Zlink rather than a conventional large local transaction log, so administration planning should include the intended app workflow.
The terminal supports Wiegand 26–44-bit input, providing an integration path for compatible reader scenarios where the overall system design calls for it.
The specified operating temperature is -25°C to 60°C with 10% to 90% non-condensing relative humidity, supporting deployment in a broad range of business environments.
At 160 × 45 × 22 mm, the unit has a narrow footprint that can work well near door frames or entry points where a bulky terminal would be inconvenient.
Before ordering, the buyer should confirm which authentication methods will actually be enabled, the card technology already in circulation, the power source, the lock type, whether remote unlocking is required, and whether the Wi-Fi environment is suitable. The published hardware capabilities are only one part of a successful access-control installation; the rest depends on the door, cabling and operational policy around the device.
Technical Specifications
The specification table is most useful when read together with the site requirement. A 500-user capacity does not automatically mean the device should serve 500 people in every installation, because user turnover, access policy, enrollment practice and future growth all affect sizing. Likewise, IP66 protection does not remove the need for correct cable entry, weather-resistant termination and protected power. Buyers replacing an older reader should compare the existing card technology and door wiring before assuming the new terminal can use all installed components unchanged. Where ZKBio Zlink will be part of the operating model, the project team should also confirm who will administer the mobile environment, how users will be enrolled, and whether remote unlocking aligns with internal security policy.
Configuration and Buyer Guidance
A good access-control quotation starts with the door, not the terminal. Before selecting the X10, identify whether the door uses a magnetic lock, electric strike or another locking method, and confirm the required power arrangement. The terminal itself uses DC 12V at 0.15A, but the lock may have a different current requirement. The power supply should therefore be sized for the complete access-control circuit rather than only for the terminal.
How many authorized users?
Compare the expected user population and future growth against the 500-user standard capacity. Include contractors or rotating users if they will be enrolled.
Which credential will staff use?
Decide whether fingerprint, card, PIN or a mix is preferred. If cards already exist, confirm their frequency and actual credential technology before reuse.
Is mobile management required?
If ZKBio Zlink is part of the plan, define administrator roles, wireless coverage, remote-unlock policy and how access changes will be managed.
What happens on exit?
Confirm whether an exit button, request-to-exit device, free egress or another mechanism is needed to match the door and life-safety design.
Buyers should also consider how the device will be mounted, whether the entry point is directly exposed to rain or dust, how cables will be routed, and whether a door sensor or doorbell is needed. For outdoor use, the terminal’s IP66 rating is helpful, but cable glands, junctions and power components must also be suitable for the environment. A robust terminal cannot compensate for exposed low-voltage joints or an underspecified power supply.
When requesting a quote from FourTeck.com, share the number of doors, estimated user count, preferred authentication method, existing card type, lock type if known, installation environment and whether ZKBio Zlink is required. This information makes it easier to recommend the correct terminal quantity and related components while reducing the risk of missing accessories after procurement approval.
Ideal Business Use Cases
Office Staff Entrances
A front-of-house or employee-only door can use fingerprint, card or PIN access while keeping the hardware footprint compact. The user capacity is suitable for many offices where the access list remains within the published limit.
Warehouse and Store Areas
Back-of-house stock rooms, warehouse offices and controlled inventory spaces often need simple user authentication without a complex visitor experience. Door hardware and environmental exposure should be reviewed before installation.
Clinics and Service Rooms
Restricted staff areas, records rooms, maintenance rooms and non-public operational spaces can benefit from multiple credential choices and a controlled list of authorized users.
Retail Back Offices
Retail businesses can separate public areas from cash offices, manager rooms or stock spaces using a dedicated controlled door. The slim form factor is useful where wall space near the frame is limited.
Remote or Secondary Sites
For a branch, workshop or remote service location, ZKBio Zlink connectivity and remote unlocking can support a more manageable access workflow, provided the organization has suitable connectivity and a clear authorization policy.
Protected Outdoor Doors
The IP66-rated housing and wide temperature specification make the device relevant to covered gates, external staff entrances and utility areas. The full installation still needs weather-aware cabling and power design.
The X10 is most compelling where the buyer wants an uncomplicated standalone door terminal with several authentication choices and modern mobile connectivity. It should not be stretched into a role that exceeds its published capacity or integration model. For a building with many doors, a large employee population, complex anti-passback rules or deep enterprise-system integration, a controller-based architecture may be more appropriate. FourTeck.com can help buyers determine when a standalone solution is sensible and when a different ZKTeco platform should be considered.
ZKTeco X10 Multi-Method Authentication
The strongest practical feature of the X10 is not simply that it reads fingerprints. It allows a business to choose among fingerprint, card and password methods within one terminal. That matters because real organizations rarely have one perfect credential for every user. Some employees may be suited to biometric enrollment, while temporary staff or contractors may be easier to manage with issued cards. PIN access can serve carefully controlled scenarios where another method is not practical, subject to the organization’s security policy.
The terminal supports 500 fingerprint templates and 500 cards. The two RFID frequencies—125 kHz and 13.56 MHz—can help when the buyer is migrating from an older credential base or supporting more than one card technology. However, buyers should distinguish between frequency and true system compatibility. A card operating at the right frequency may still use an encoding, security application or credential format that is not interchangeable with an existing system. Card samples or precise card details should therefore be reviewed before a bulk rollout.
ZKTeco specifies fingerprint verification at less than 0.3 seconds with published FAR and FRR values. For the end user, the real benefit is reduced friction at the door when fingerprints are enrolled correctly and the sensor is used under suitable conditions. Good enrollment practices remain important. Users should be trained to present the enrolled finger consistently, and organizations should keep a backup credential policy for situations where a fingerprint cannot be read conveniently.
From a procurement perspective, multi-method authentication can also simplify standardization. Instead of purchasing separate keypad-only, card-only and fingerprint readers for similar small access points, the organization can consider one common terminal where the same model fits several door policies. FourTeck.com can help buyers map user groups and credential requirements to the right deployment approach before finalizing quantities.
ZKTeco X10 ZKBio Zlink Connectivity and Remote Access
Wireless connectivity changes how a standalone access-control terminal can be administered. The X10 includes 2.4 GHz Wi-Fi and Bluetooth 5.0, and ZKTeco positions the device for use with the ZKBio Zlink mobile application. This gives authorized users a path to connected management and remote unlocking rather than limiting every administrative action to the physical keypad at the door.
Remote unlocking is useful only when it is governed well. A branch manager may need to let an approved service technician into a restricted room, or an administrator may need to grant access to a controlled door from another location. In these situations, app-based control can reduce unnecessary travel and provide a more responsive operating model. The organization should still define who is allowed to perform remote unlocks, which doors are suitable for that feature, and how mobile administrator accounts are protected.
Wireless deployment also introduces practical infrastructure questions. The X10 uses 2.4 GHz Wi-Fi, so the access point near the door should have adequate coverage on that band. Thick concrete, metal door frames, elevator cores or long distances from the wireless access point can affect connectivity. If reliable app connectivity is business-critical, the wireless environment should be validated at the actual mounting location instead of assumed from office-wide coverage.
The global specification describes transaction capacity as not applicable with cloud synchronization through ZKBio Zlink. Buyers who expect a large traditional on-device transaction archive should therefore review how the intended cloud workflow matches their reporting and administration needs. FourTeck.com can help clarify whether this connected operating model fits the project or whether a different ZKTeco platform is more appropriate for centralized, high-volume access management.
ZKTeco X10 IP66 Housing and Door Deployment
Access-control devices live at the edge of the network, often in harsher conditions than servers, switches or office computers. They may be mounted near entrances that experience dust, humidity, temperature swings and cleaning activity. The X10 addresses this with a zinc-alloy housing and an IP66 ingress-protection rating. ZKTeco also specifies an operating range from -25°C to 60°C and 10% to 90% relative humidity without condensation.
For UAE buyers, these specifications are relevant because access points can sit close to exterior doors, loading areas, workshops or semi-outdoor zones. IP66 provides meaningful protection against dust and water ingress, but it should not be interpreted as permission to ignore installation practice. The back of the device, cable entry, power connections and any junction enclosure must be installed appropriately. Direct exposure to intense heat or poorly protected wiring can still create reliability problems even when the terminal itself has a strong environmental rating.
Door hardware is equally important. The terminal includes interfaces for one electric lock, one door sensor, one exit button and one doorbell. A complete system should be designed so that the lock type, power supply, exit method and door monitoring all fit the physical door and local safety requirements. Buyers should avoid assuming that an existing magnetic lock or strike can be reused without checking voltage, current and wiring.
The wall-mounted device measures 160 × 45 × 22 mm, giving it a slim vertical footprint. This can be helpful on narrow mounting surfaces, but installers still need space for secure fastening and concealed cable routing. FourTeck.com can support the procurement discussion by helping buyers identify the terminal, compatible access-control accessories and project information needed before an installer begins work.
What Should You Know Before Choosing This Access Terminal?
The questions below reflect the practical checks that usually determine whether a standalone biometric terminal will work well after installation. They focus on user scale, credential compatibility, wireless management, door hardware and long-term administration rather than simply repeating the specification table.
Is the X10 suitable for a small or medium office?
Yes, when the user population and access design fit its standard 500-user capacity. It can serve a staff entrance, departmental door or restricted room using fingerprint, card or PIN verification. For a larger site with many controlled doors or more than 500 enrolled users, buyers should review a higher-capacity or controller-based system instead of simply adding more standalone devices without a management plan.
Can existing staff cards be reused?
Possibly. The terminal supports 125 kHz ID and 13.56 MHz IC cards, but frequency alone does not confirm that every existing credential will work. Buyers should identify the exact card technology, encoding and current access system before assuming reuse. For a project migration, providing a sample card or precise credential information helps reduce the risk of ordering hardware that cannot recognize the deployed card format.
What door hardware must be confirmed before ordering?
Confirm the electric-lock type, lock voltage and current, power-supply design, door sensor requirement, exit method and whether a doorbell is needed. The X10 provides interfaces for these common functions, but the terminal does not eliminate the need to size and select the connected hardware correctly. Door material and fail-safe or fail-secure behavior should also be reviewed with the installer or project consultant.
Does the terminal require Wi-Fi for basic door access?
The product is a standalone access-control terminal, while Wi-Fi and Bluetooth add connected management options through ZKBio Zlink. Buyers planning remote unlocking or cloud-synchronized administration should treat reliable 2.4 GHz Wi-Fi as part of the project. For local operation, the installation still requires the terminal, power and appropriate door hardware. Confirm the intended management workflow before deciding how critical wireless connectivity will be.
Is the X10 appropriate for outdoor installation?
Its zinc-alloy housing carries an IP66 waterproof and dustproof rating and the published temperature range reaches 60°C, making it suitable for many protected outdoor or demanding entry environments. Installation quality remains important. Cable routes, junctions, power components and mounting surfaces should be protected appropriately, and the device should be positioned so maintenance access and everyday credential use remain practical.
How should a business plan for future user growth?
Start with the expected number of permanent users, then add reasonable allowance for contractors, replacement cards and organizational growth. The standard limit is 500 users, cards and fingerprint templates. If the project may exceed that ceiling or expand to many doors, it is better to review a scalable access-control architecture early than to redesign the system after the user base has already outgrown the terminal.
What should be checked when replacing an older standalone reader?
Compare the existing reader’s wiring, lock interface, card technology, power supply and mounting footprint. Also identify whether the old system relied on local logs, desktop software or controller communication, because the X10 uses a ZKBio Zlink-centered connected model. A direct physical replacement may be possible in some sites, but functional equivalence should be reviewed rather than assumed from the product category alone.
Which accessories may be needed in the final bill of materials?
Depending on the door, a project may need an electric lock or strike, suitable power supply, exit button, door sensor, cabling, weather-protected junction box and mounting hardware. Cards may also be required if RFID will be used. The correct accessory list is site dependent, so buyers should avoid treating the terminal price as the complete installed-door cost.
What information should I send FourTeck.com for an accurate quote?
Share the number of doors, approximate number of users, preferred authentication methods, existing card type, lock details if known, indoor or outdoor location, requirement for ZKBio Zlink, and the delivery location. If this is a replacement project, include the existing device model and photos of the door wiring or mounting area where available. That information helps FourTeck.com recommend the terminal and related components more accurately.
Common Business Requirements This Product Can Support
For businesses that need more than one credential choice
The combination of fingerprint, RFID and password verification supports mixed user policies. Buyers should decide which method will be standard, which will be backup, and how credentials will be revoked when staff roles change.
For a controlled door exposed to dust or weather
The IP66-rated zinc-alloy housing supports more demanding locations than a typical indoor-only reader. The installation should still include suitable cable protection, junctions and power components for the actual environment.
For teams planning connected mobile administration
ZKBio Zlink support, 2.4 GHz Wi-Fi and Bluetooth 5.0 can fit organizations that want a mobile-supported access workflow. Wireless coverage and administrator permissions should be planned before rollout.
For replacing a basic standalone access device
The X10 can be considered when an older keypad or card terminal is being replaced and multi-method authentication is desired. Existing lock wiring, cards and power should be checked before treating it as a direct swap.
For a single-door project with standard peripherals
Interfaces for an electric lock, door sensor, exit button and doorbell support a conventional controlled-door design. Each connected component must be selected according to the door and power requirement.
For procurement teams comparing total project cost
The terminal is only one item in a working system. Budgeting should also consider locks, power supplies, exit hardware, cards, cabling, installation and future administration rather than comparing device prices alone.
What Buyers Should Check Before Purchase
A reliable access-control purchase should solve a defined entry requirement, not simply replace one device with another that looks similar. Start by confirming the exact X10 model and intended authentication methods. If fingerprint use is important, decide how users will be enrolled and what backup method will be available. If RFID cards will be used, confirm the card technology beyond frequency. If passwords will be allowed, define who can use them and how those credentials are managed.
Configuration Fit
Check the 500-user capacity against current and planned staffing. Define whether one terminal will control one door or whether the project requires multiple controlled doors with centralized administration.
Compatibility Check
Review card type, lock hardware, 12V power, exit devices, door sensor wiring, Wi-Fi coverage and mounting conditions. Existing components should be reused only after compatibility is confirmed.
Availability and Warranty
Ask for current UAE product availability and the applicable warranty terms at quotation time. These details can vary by supply channel and should not be assumed from a general product page.
Quote Preparation
Provide door count, user count, credential preference, lock type, site environment, delivery location and any app-management requirement so the quotation can include the relevant components.
Installation responsibility should also be clear before procurement. Some buyers need product supply only, while others need coordination with a security integrator or facilities contractor. The terminal supports common access-control interfaces, but final lock wiring, power design and door behavior should be handled by a competent installer. Where remote unlocking will be enabled, security policy should specify who is authorized to use it and how mobile access is protected.
Long-term usage cost includes more than the terminal. Consider replacement cards, power supplies, lock maintenance, possible network changes, enrollment administration and any services associated with the connected management environment. If the project is expected to grow substantially, compare the cost of adding standalone terminals against moving to a more centralized ZKTeco access-control architecture. FourTeck.com can help buyers review these questions before a quote is finalized, reducing the chance of discovering missing components after the purchase order is issued.
UAE Availability and Service Support
FourTeck.com supports ZKTeco access-control inquiries for businesses in Dubai and across the UAE with product-selection assistance, quotation support, configuration review, delivery coordination and warranty guidance. Availability can vary according to the current supply channel, order quantity and project timing, so the page does not assume ready stock or guaranteed delivery dates.
For the X10, a useful inquiry should include the number of doors, user count, required authentication methods, card technology, indoor or outdoor location and whether ZKBio Zlink will be used. If the project already has electric locks, exit buttons, sensors or a 12V power system, providing those details helps determine which components may be reusable and which should be quoted separately.
Warranty coverage should be confirmed on the commercial quotation because applicable terms can depend on the supplied product channel and project conditions. FourTeck.com can also help identify suitable alternatives if the X10 is not the right capacity, management model or integration fit for the site. This is especially important for multi-door installations where a centralized controller or higher-capacity terminal may provide a cleaner long-term architecture.
UAE City Coverage
Businesses in Dubai, Abu Dhabi, Sharjah and Ajman can contact FourTeck.com for access-control product availability, configuration guidance and quote assistance. The same planning principles apply across the UAE: identify the door type, user population, credential preference, lock hardware and management requirement before ordering. For multi-location projects, it is helpful to provide a site-by-site door count and note whether the same card population or administrative workflow will be used at every location. FourTeck.com can then help buyers compare a standardized X10 deployment with other ZKTeco options where capacity or centralized management needs differ.
Regional Availability for GCC and Africa Projects
FourTeck.com also supports business technology inquiries across selected GCC and Africa markets through regional inquiry channels. Companies planning access-control projects in Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Kenya, Uganda and other supported markets can request product and configuration guidance, while delivery options, supplier status, warranty handling and project support may differ by destination.
For regional rollouts, standardization is usually more important than buying the terminal site by site. Procurement teams should define the approved credential type, expected user population, door hardware, power standard, administrative workflow and mounting environment before purchasing multiple units. This helps reduce inconsistent card technologies or different accessory lists across locations. Where the X10 capacity or standalone architecture is not sufficient, FourTeck.com can help identify other models better suited to a larger deployment.
Other ZKTeco Options Buyers May Consider
The right alternative depends on whether the project needs more user capacity, a different management model, a display, face recognition or deeper controller integration. The products below represent useful comparison directions rather than a claim that one is universally better.
ZKTeco X100 / X101
Consider for a different standalone biometric-reader format with Wiegand integration options and higher published user capacity in the X100/X101 family.
ZKTeco F22
Useful for buyers evaluating a fingerprint access-control terminal with display, Wi-Fi and time-attendance-oriented capabilities in a different product class.
ZKTeco SC405
A card-focused access-control option for projects that prioritize RFID administration and a display rather than fingerprint authentication at every door.
ZKTeco ProMA Series
Consider for higher-end multi-biometric outdoor requirements where larger authentication capacities and additional biometric methods are needed.
When comparing alternatives, focus on the deployment architecture rather than feature count alone. A compact standalone terminal may be the cleanest solution for one or two doors, while a controller-based platform can be easier to govern across a large building. FourTeck.com can help procurement teams compare these paths according to user count, number of locations, credential policy and integration requirements.
Why Business Buyers Contact FourTeck.com
FourTeck.com works with business buyers who need clear product information and procurement support rather than consumer-style checkout decisions.
Access-control purchases can depend on door hardware, credentials, power and software. FourTeck.com can help buyers organize those requirements before quotation.
Buyers can request a commercial quotation based on required quantities, delivery location and the accessories needed for the project.
Delivery requirements can be reviewed as part of the inquiry without making unsupported promises about stock or same-day dispatch.
Applicable warranty terms and supply-channel conditions can be confirmed with the commercial offer instead of being assumed from a generic page.
If capacity, management or integration requirements exceed what a standalone terminal should handle, FourTeck.com can help identify a more suitable direction.
For project buyers, this advisory approach can prevent common procurement mistakes: ordering the wrong card technology, overlooking the lock power supply, selecting a terminal with insufficient capacity, or assuming an app workflow will integrate with an existing system without verification. The aim is to align the product with the door and operating requirement before a purchase order is raised. This is particularly important when several branches or departments need a consistent access-control standard.
Frequently Asked Questions
What is the ZKTeco X10 used for?
It is a standalone door access-control terminal for authenticating authorized users with fingerprints, RFID cards or passwords. It connects to common door hardware such as an electric lock, door sensor and exit button. Its compact wall-mounted design makes it suitable for controlled staff entrances, restricted rooms and other business doors where a local terminal is appropriate.
How many users can the X10 support?
The standard published capacity is 500 users, 500 cards and 500 fingerprint templates. Buyers should include expected growth and temporary users when deciding whether this capacity is sufficient. For a larger population or a project with many doors, a higher-capacity or centrally managed ZKTeco solution may be a better long-term fit.
Which RFID cards does the terminal support?
ZKTeco lists support for ID and IC cards at 125 kHz and 13.56 MHz. This gives the terminal useful credential flexibility, but buyers should still confirm the exact card technology and encoding already in use. A matching radio frequency does not always mean an existing access card will be compatible with a new reader.
Can the X10 be used outdoors?
The device has a zinc-alloy housing and an IP66 ingress-protection rating, with a published operating range of -25°C to 60°C. These specifications make it suitable for many protected outdoor and demanding entry environments. Correct cable protection, mounting, power and junction-box design remain necessary for a reliable installation.
Does the X10 work with ZKBio Zlink?
Yes. ZKTeco lists ZKBio Zlink as the supported mobile application and describes connected functions including remote unlocking and cloud synchronization. Organizations should confirm how administrators will use the app, whether the 2.4 GHz wireless coverage is reliable at the door and whether remote unlocking fits internal access-control policy.
What power supply does the terminal need?
The published terminal power requirement is DC 12V at 0.15A. The complete door solution may require a higher-capacity power supply because the electric lock and other accessories have their own electrical requirements. Buyers should size the power supply for the full access-control circuit, not only the terminal.
Is the X10 available in Dubai and the UAE?
FourTeck.com can assist with current UAE availability and quotation requests. Availability may change according to the supply channel, quantity and project timing, so stock is not assumed on this page. Share the required quantity, delivery location and accessory needs to receive a more useful commercial response.
Can FourTeck.com help with a complete door bill of materials?
FourTeck.com can help buyers identify the product and related procurement requirements based on the information provided. A complete door may require a lock, power supply, exit button, door sensor, cabling, cards and mounting accessories. Final installation design should be confirmed with the responsible installer or access-control consultant.
How do I request a quote?
Use the FourTeck.com contact page and provide the model name, quantity, number of doors, approximate user count, preferred credential type, site environment and delivery location. If this is a replacement project, include the existing reader model and lock details where available. These details help reduce back-and-forth and improve configuration accuracy.
What warranty applies to the X10?
Warranty coverage should be confirmed on the quotation for the specific supply channel and order. This page does not assume a universal warranty period. FourTeck.com can provide applicable warranty guidance during the commercial inquiry so the buyer can evaluate support expectations before issuing a purchase order.
Need Help Planning the Right X10 Door Setup?
FourTeck.com can help you review product availability, credential requirements, door accessories, ZKBio Zlink needs, warranty guidance and delivery requirements for your business location. Share your door count, user estimate and existing access-control details to start the quotation process.
