Quick product summary
QHD 4MP analog IR dome camera with AHD output and an additional CVBS output for installation.
Indoor commercial surveillance where existing or planned coax infrastructure is compatible with the recorder and power design.
2.8mm F1.8 fixed lens with approximately 107.48° horizontal field of view for broad room, corridor-junction or open-area coverage.
Automatic day/night with ICR and built-in IR illumination rated for viewing up to 20 metres.
Product overview and buyer-fit guidance
The Hanwha HCD-7010RA is designed for projects that need QHD resolution without moving every camera position to an IP architecture. It outputs AHD video through BNC and is therefore most relevant when the site has a compatible analog HD recorder or a migration plan that deliberately preserves coax cabling. This can be useful in offices, retail interiors, reception areas, warehouses, schools, clinics and other locations where cable replacement would add disruption or cost. The camera is not a network camera and should not be purchased on the assumption that it connects directly to a PoE switch or NVR. Recorder input format, channel resolution, frame-rate capability and coax condition should be checked first.
Its fixed 2.8mm lens prioritises a broad view rather than optical zoom. That makes the model appropriate for overview coverage where the camera position can be selected during installation. For entrances or distant identification points where a tighter angle is needed, another focal length or a different camera family may be more suitable. The housing is polycarbonate and the published operating range is -10°C to +55°C, so the HCD-7010RA should be treated as an indoor dome unless the actual location is protected and the environmental conditions are within specification. Buyers needing a weather-resistant or vandal-resistant dome should compare the Hanwha HCV family instead.
Key features and business benefits
4MP QHD detail
A 2560 × 1440 image provides more scene detail than conventional 1080p analog video when paired with a recorder that supports the camera’s AHD resolution and frame rate.
Wide fixed view
The 2.8mm lens offers a wide horizontal angle, helping one camera cover broader indoor areas when installed at a suitable height and orientation.
Built-in infrared
Integrated IR supports monochrome viewing in darkness up to the published 20m range, reducing the need for separate illumination in many indoor scenes.
Coax migration value
AHD transport can help organisations modernise camera endpoints while retaining suitable coax infrastructure, subject to recorder compatibility and cable condition.
Image controls
DWDR, BLC, HLC, 2D noise reduction, privacy masking and white-balance controls provide useful adjustment for real-world lighting and privacy requirements.
Simple power design
The camera uses 12VDC and consumes a maximum of 5W, allowing straightforward low-voltage power planning where suitable regulated supplies are provided.
Verified technical specifications
| Specification | HCD-7010RA detail | Planning note |
|---|---|---|
| Image sensor | 1/3-inch CMOS | Analog HD camera architecture |
| Resolution | 2560 × 1440 | Confirm recorder supports 4MP AHD |
| Frame rate | 30fps NTSC / 25fps PAL | Recorder setting dependent |
| Lens | 2.8mm fixed, F1.8 | Wide overview rather than optical zoom |
| Field of view | H 107.48° / V 59.67° / D 122.01° | Verify scene geometry on site |
| IR range | Up to 20m | Actual image depends on reflectivity and scene layout |
| Video output | BNC AHD; CVBS installation output | Not an IP/PoE camera |
| Transmission distance | Up to 500m over 5C2V coax | Cable quality, connectors and route matter |
| Day/night | Auto ICR | Automatic colour/mono transition |
| Image functions | BLC, HLC, DWDR, 2DDNR, motion detection, privacy masking | Configure during commissioning |
| Power | 12VDC, max 5W | Use correctly sized regulated supply |
| Operating range | -10°C to +55°C; 0–90% RH non-condensing | Indoor environmental planning required |
| Dimensions / weight | Ø110.1 × 86.1mm / 240g | Check mounting surface and access |
Compatibility, configuration and installation guidance
The HCD-7010RA should be matched to an AHD-capable recorder that can accept 4MP input at the required frame rate. Do not assume every legacy DVR supports the camera simply because it has BNC connectors. Before ordering, identify the recorder model and firmware, available channels, supported analog formats, recording resolution, storage capacity and monitor requirements. If the project is a partial upgrade, confirm whether old and new camera formats can coexist on the same recorder.
Cabling should be inspected rather than assumed reusable. Hanwha specifies up to 500m transmission over 5C2V coax, but real sites may contain splices, mixed cable types, corrosion, poor BNC terminations or routes close to electrical interference. Power is separate from the video path and requires 12VDC at the camera. Voltage drop must be considered on long power runs. For new installations, a site survey should confirm camera height, field of view, IR reflections, ceiling material, cable access, recorder location and power distribution.
The camera offers adjustment for pan, tilt and rotation during installation. Commissioning should include final aiming, focus verification for the fixed lens, day/night transition testing, motion-zone setup where used, privacy masks if required and recording playback verification. If the environment is exposed to rain, direct washdown, deliberate impact or severe outdoor heat, compare a weather/vandal-rated Hanwha model instead of relying on the HCD-7010RA’s indoor dome housing.
Ideal customers and use cases
Wide indoor coverage for entrances, lobby zones, corridors and shared work areas where a discreet dome form is preferred.
Overview monitoring in shops and customer-service areas, with the wide lens helping cover compact floor space.
Sites that want higher-resolution cameras while retaining compatible coax infrastructure and a suitable AHD recorder.
Indoor observation points where broad fixed coverage, day/night operation and simple camera management are required.
What to confirm before ordering
- Recorder make, model and support for 4MP AHD input.
- Quantity of available DVR channels and required recording retention.
- Existing coax type, condition, connector quality and approximate cable lengths.
- 12VDC power design and voltage-drop allowance.
- Indoor placement, mounting surface and operating temperature.
- Required viewing angle and whether a 2.8mm fixed lens is appropriate.
- Night-scene distance and possible IR reflections from walls, glass or ceilings.
- Whether vandal resistance or outdoor weather protection is required.
- Required mounts, junction hardware and installation accessories.
- Current product availability, commercial terms and applicable warranty path for the quoted supply.
Comparison and related-model guidance
Choose the HCD-7010RA when you need a wide 2.8mm view in an indoor analog-HD dome format. Hanwha’s HCD-7020RA and HCD-7030RA family variants use different fixed focal lengths and can be considered where a narrower scene is preferred. The HCV-7010RA is a more appropriate comparison for exposed or higher-risk positions because Hanwha lists it as a vandal-resistant IR dome with IP66 and IK10 protection. For projects moving to a fully networked architecture, compare Hanwha IP cameras and NVRs instead; those systems have different cabling, PoE, cybersecurity and video-management considerations and should not be treated as drop-in equivalents for an analog camera.
Hanwha HCD-7010RA Dubai
Dubai buyers evaluating the Hanwha HCD-7010RA are often dealing with an existing CCTV estate rather than a completely new installation. Offices, shops, warehouses, clinics, schools, small hospitality sites and commercial buildings may already have coax cabling routed through ceilings and risers. In that situation, the practical question is not simply whether a 4MP camera is better than an older model; it is whether the current recorder, cabling and power design can support the HCD-7010RA without creating avoidable replacement work. The camera’s AHD output, 4MP resolution and published long-distance coax capability make it relevant to these upgrade conversations, but every existing route should still be checked.
Dubai sites vary sharply in lighting and building layout. A retail floor may have bright storefront glazing, while a warehouse corridor may depend heavily on artificial light. DWDR, BLC and HLC controls can help with difficult scenes, but correct placement remains essential. The 2.8mm lens is wide and suits broad indoor views, yet a camera positioned too high or too far away may not capture the detail expected at a doorway or transaction point. Before a quotation, FourTeck can review the desired scene, camera quantity, recorder model and cable distances so buyers can determine whether the HCD-7010RA is the right focal length and platform.
For Dubai procurement, ask for the exact supply scope rather than assuming a camera-only price represents a complete working system. A project may also need regulated 12VDC power, BNC terminations, replacement cable sections, mounting accessories, recorder upgrades, hard-drive capacity, monitor changes and installation labour. Availability and warranty terms can vary with supplier channel and project quantity, so they should be confirmed in the quotation. For a broader CCTV design or installation review, use the FourTeck business technology site or the FourTeck UAE resource to discuss the site requirement.
Hanwha HCD-7010RA UAE
Across the UAE, the HCD-7010RA is most useful where a business wants consistent indoor surveillance across multiple premises while retaining compatible coax infrastructure. A company may operate an office in Abu Dhabi, a warehouse in Sharjah and a customer-facing branch in Ajman, each with different legacy recorders and cabling conditions. Standardising the camera model can simplify spares and visual consistency, but only if the DVRs at all sites support the required AHD format and resolution. A multi-emirate project should therefore begin with an equipment inventory rather than a bulk camera order.
The UAE climate also affects planning even for a camera intended mainly for indoor use. Ceiling voids, non-air-conditioned service spaces and entrances close to exterior heat can run warmer than occupied rooms. Hanwha publishes an operating range of -10°C to +55°C for the HCD-7010RA, so installers should make sure the actual mounting location remains within specification. For outdoor, exposed or vandal-prone positions, a protected Hanwha dome should be selected instead. The camera’s integrated 20m IR is useful for dark indoor spaces, but night performance still depends on wall colour, reflective surfaces, obstructions and the distance to the subject.
UAE buyers should also define retention targets before changing camera resolution. Moving from lower-resolution analog video to 4MP can increase recording storage demand depending on the recorder’s codec and settings. A project review should include hard-drive capacity, frame rate, motion recording policies and evidence-export needs. FourTeck can support requirement mapping and quotation coordination without assuming current stock or a fixed delivery date. For UAE-wide IT and security planning, visit FourTeck UAE, and for wider regional project support use FourTeck.com.
Hanwha HCD-7010RA Kenya
Kenya buyers considering the HCD-7010RA should first decide whether the project is an analog-HD upgrade or whether a full IP migration would be more appropriate. Existing offices, retail locations, schools, clinics, apartment common areas and warehouses may have usable coax cabling that still represents significant installed value. In those cases, a 4MP AHD dome can extend the life of the cable plant while improving image resolution, provided the recorder is compatible. Where a new site has no cabling at all, an IP camera design may deserve comparison because it changes how power, networking, remote management and expansion are handled.
Long cable runs are common in compounds, warehouses and multi-building facilities. Hanwha’s published AHD transmission distance of up to 500 metres over specified 5C2V coax can be useful, but it should not be interpreted as a guarantee for every existing cable. Cable gauge, shielding, joints, connectors, interference and physical condition all influence the real result. Power is also separate, so long 12VDC runs require voltage-drop checks. For remote or branch sites, it may be worthwhile to position regulated power closer to the camera group rather than relying on one long low-voltage run.
Procurement teams in Kenya should request a technical bill of materials that clearly separates camera hardware, recorder requirements, storage, power supplies, connectors, brackets and labour. That approach makes comparisons easier and reduces the chance of receiving a camera that cannot be used with the installed recorder. FourTeck can help review model suitability and regional supply options, with current availability and warranty details confirmed at quotation stage. Kenya customers can use FourTeck Kenya for regional enquiries and FourTeck Africa for broader project coordination.
Hanwha HCD-7010RA Kuwait
In Kuwait, commercial CCTV upgrades often have to work around installed infrastructure, operational hours and site access. The HCD-7010RA suits buyers who want a 4MP indoor dome while continuing to use compatible AHD over coax. This can reduce disruption where cable replacement through finished ceilings or occupied premises would be difficult. Before choosing the camera, identify the DVR model and confirm 4MP AHD support, because BNC connectivity alone does not establish compatibility. Mixed-format DVR environments should be tested carefully when older cameras will remain in service beside newer 4MP units.
The camera’s 2.8mm fixed lens is designed for a broad field of view. In Kuwait offices, retail stores, reception areas and indoor corridors, that can be useful for general scene coverage. However, if the main objective is detailed identification at a distant doorway, a narrower focal length may provide a more suitable pixel density at the target. Night scenes should also be reviewed for reflective marble, glass panels, glossy walls and other surfaces that can bounce IR light back toward the camera. Correct aiming and commissioning often matter as much as the headline 20m IR figure.
Kuwait buyers should ask for project-specific availability, warranty route and delivery terms rather than relying on generic regional claims. If cameras are being shipped for a contractor-led installation, confirm who is responsible for compatibility checks, defective-unit handling and commissioning. If FourTeck is assisting with design, share the site type, camera count, recorder model, cable lengths and target scenes so the required configuration can be reviewed. Regional enquiries can be directed through FourTeck Kuwait, with wider technical and commercial coordination available through FourTeck.com.
Hanwha HCD-7010RA Ghana
Ghana organisations looking at the Hanwha HCD-7010RA may be upgrading branch offices, shops, schools, healthcare facilities, warehouses or other premises where conventional coax CCTV is already installed. The strongest case for this model is usually compatibility with a planned AHD recorder and the ability to reuse serviceable cabling. A site with damaged cable, poor connectors or an unsupported DVR will not gain the same benefit, so a technical audit should be completed before purchasing a large quantity.
The camera’s 4MP resolution can improve captured detail compared with lower-resolution legacy analog cameras, but storage planning must be revisited at the same time. The recorder’s compression format, frame rate, motion schedule and retention target determine how much hard-disk capacity is needed. If a Ghana branch requires 30 days or more of retention, for example, the storage calculation should be based on the intended recording settings rather than copied from the old system. This is especially important when several cameras are upgraded at once.
For indoor low-light areas, integrated IR and automatic day/night operation simplify installation, but the scene should still be checked for reflections, dust and obstructions. The HCD-7010RA is not presented by Hanwha as an IP66 or IK10 model; buyers needing exposed outdoor or vandal-resistant coverage should compare a model designed for those conditions. FourTeck can assist with configuration review, recorder matching and regional procurement planning while confirming actual availability and commercial terms at the time of enquiry. Ghana buyers can contact FourTeck Ghana or use FourTeck Africa for multi-country projects.
Hanwha HCD-7010RA Uganda
Uganda buyers can evaluate the HCD-7010RA as a practical indoor upgrade camera for sites that already depend on coax-based CCTV. Offices, retail outlets, schools, medical facilities and warehouses often face a choice between replacing the entire video path or retaining usable cable while improving the endpoints and recorder. Because this Hanwha model is AHD rather than IP, it belongs in the second category. A compatible 4MP AHD DVR is essential, and mixed legacy systems should be checked channel by channel before procurement.
Sites outside major urban centres may put extra emphasis on maintainability and spare planning. A fixed-lens dome has fewer optical configuration variables than a motorised zoom camera, but the trade-off is that the viewing angle must be correct at installation. The 2.8mm lens is wide, so survey drawings or sample camera tests can help determine whether people and objects at the key target distance appear with enough detail. Power quality is another practical factor. The HCD-7010RA requires 12VDC and uses up to 5W, so the CCTV power system should include properly sized regulated supplies and appropriate backup if continuous operation is required.
For Uganda procurement, ask for a quotation that identifies the exact camera model, required accessories and any recorder or storage changes. Avoid assuming availability, delivery timing or warranty coverage until the supplier confirms them for the specific order. FourTeck can help with model selection, system planning and supply coordination based on the site requirement. Uganda customers can use FourTeck Uganda, while organisations with broader East African or pan-African rollouts can also use FourTeck Africa.
Hanwha HCD-7010RA Nigeria
Nigeria has a wide range of CCTV environments, from compact offices and retail locations to logistics compounds, schools, healthcare sites and multi-branch businesses. The HCD-7010RA is best positioned for indoor spaces where a broad fixed view is required and a compatible AHD coax system is already available or intentionally being deployed. Buyers replacing older analog cameras should not treat the upgrade as camera-only: the recorder’s supported resolutions, storage capacity, power distribution and cable condition all need to be considered together.
Power resilience is a common design consideration in surveillance projects. Although the HCD-7010RA itself has modest power demand at up to 5W, the complete CCTV system includes the DVR, display, storage drives and multiple camera power channels. UPS or alternative backup arrangements should therefore be sized for the total load and the desired runtime. On long runs, 12VDC voltage drop should be calculated rather than estimated. Poor power can create unstable images or camera resets even when the video cable is sound.
The camera’s 20m IR capability helps in dark rooms and corridors, but installers should test the night scene after final mounting. Near walls, glass or reflective surfaces, wide-angle IR can create bright foreground areas that reduce useful background visibility. Where the location is exposed outdoors or subject to deliberate impact, a weather/vandal-resistant Hanwha model is more appropriate. FourTeck can help Nigeria buyers review these choices, prepare a bill of materials and request current supply terms without making assumptions about stock or warranty. Use FourTeck Nigeria or FourTeck Africa for regional project enquiries.
Hanwha HCD-7010RA Seychelles
Seychelles projects often combine compact business premises with demanding environmental conditions. The HCD-7010RA is an indoor dome, so it should be installed only where temperature, humidity and exposure remain within the manufacturer’s specification. Coastal air, open-sided structures and areas exposed to driven moisture require more careful model selection. If a camera position is outside or likely to experience salt-laden moisture, a purpose-built weather-resistant Hanwha camera should be considered instead of relying on an indoor housing.
For hotels, offices, retail locations, schools and service facilities with existing coax, the HCD-7010RA can be considered as part of a 4MP AHD upgrade. The 2.8mm lens gives a wide overview that may suit reception zones, internal corridors and common areas. However, resort and hospitality sites may also have long corridors or entry points where a narrower focal length is preferable. Camera selection should therefore be based on the target scene rather than one model being used everywhere. A site drawing, photos or sample footage can make this assessment more accurate.
Island procurement also makes early compatibility planning valuable because replacement logistics can take more coordination than a local same-city project. Before dispatch, confirm recorder compatibility, quantities, mounting needs, power supplies, storage capacity and spare-unit strategy. Current shipping, availability and warranty handling should be agreed as part of the quotation. FourTeck can support Seychelles enquiries through its wider African project channel, including system review and regional supply coordination. Use FourTeck Africa for Seychelles and multi-country requests, or FourTeck.com for general technical and commercial enquiries.
Related FourTeck products and project components
The following verified FourTeck product pages are adjacent infrastructure options rather than direct Hanwha HCD-7010RA equivalents. They can be relevant when a security project also includes access control, networking or entrance management.
Managed multigig PoE access switch for larger IP-device environments. Best fit when a broader security project also includes IP cameras, access points or other powered endpoints.
Face and RFID access-control terminal. Useful for sites combining video surveillance with controlled-door identity verification.
Multi-method access terminal with face, fingerprint, card and password options for office and facility access-control projects.
Higher-capacity hybrid biometric access terminal for entrances where surveillance and identity-based door control are planned together.
Barrier-safety radar for vehicle entrances. Relevant to projects that combine camera monitoring with parking or gate automation.
Vehicle-radar product for controlled entrance projects where barrier operation and surveillance need coordinated planning.
Dedicated QR and barcode reader for visitor, credential or workflow applications that may complement a physical-security deployment.
Regional FourTeck resources
For CCTV system planning in Dubai and the UAE, buyers can use FourTeck.com and FourTeck UAE. Regional requirements can be routed through FourTeck Kenya, FourTeck Kuwait, FourTeck Ghana, FourTeck Uganda, FourTeck Nigeria and FourTeck Africa. Share the exact camera model, site country, quantity, recorder details and project scope for a more useful response.
Why contact FourTeck for the HCD-7010RA?
A camera quotation is more useful when it reflects the system around the camera. FourTeck can help buyers review the HCD-7010RA against recorder format, channel capacity, coax condition, power distribution, camera angle, storage and installation requirements. This reduces the risk of ordering a technically correct camera that does not match the existing DVR or site conditions. Current availability, commercial terms, delivery arrangements and applicable warranty details should be confirmed for the actual order rather than assumed from a generic product listing.
Frequently asked questions
What resolution does the Hanwha HCD-7010RA support?
The HCD-7010RA outputs QHD video at 2560 × 1440, commonly described as 4MP. Hanwha lists up to 30fps in NTSC and 25fps in PAL. The connected DVR must support the camera’s AHD format and resolution; an older recorder with BNC inputs is not automatically compatible.
Is the HCD-7010RA an IP camera?
No. It is an analog HD camera using AHD video over coax through a BNC connection. It does not connect directly to a PoE network switch like an IP camera. A compatible AHD DVR and a separate 12VDC power arrangement are required.
How far can the camera see at night?
Hanwha lists an IR viewable length of up to 20 metres. Actual useful detail depends on the scene, reflectivity, mounting angle and target size. Walls, glass and bright reflective surfaces can affect infrared performance, so night testing should be part of commissioning.
What lens does the HCD-7010RA use?
It uses a 2.8mm fixed F1.8 lens with a published horizontal field of view of approximately 107.48°. This is a wide-angle overview lens. If a project needs a tighter view of a distant entrance or object, another focal length should be considered.
Can I reuse existing coax cable?
Potentially, yes, if the cable type, condition and terminations are suitable. Hanwha publishes up to 500m AHD transmission over 5C2V coax. Existing cable should still be inspected for joints, corrosion, interference and connector quality before relying on it for a 4MP upgrade.
Is the HCD-7010RA weatherproof?
Hanwha’s current HCD-7010RA specification does not list an IP66 or IK10 rating for this model. Treat it as an indoor dome. If the camera position is exposed to weather or deliberate impact, compare a weather- and vandal-resistant model such as the HCV family.
What power supply does it need?
The HCD-7010RA uses 12VDC and Hanwha lists maximum consumption of 5W. The installer should size the power supply and cable for the number of cameras and route length, allowing for voltage drop and any backup-power requirement.
Does it support motion detection?
Yes. Hanwha lists motion detection with four zones, as well as two privacy-masking zones and image controls including DWDR, BLC, HLC and 2D noise reduction. Final behaviour should be configured and tested with the connected recorder during commissioning.
Can FourTeck confirm price and availability in Dubai?
Yes, FourTeck can prepare a project quotation and confirm current supply conditions after the required quantity, delivery location and system context are provided. This page does not claim fixed pricing, stock, lead time or warranty coverage because those details can change by supplier and order.
What should I send when requesting a quote?
Send the model HCD-7010RA, quantity, country or city, existing DVR make and model, approximate cable lengths, whether installation is needed and the type of areas to be covered. Photos or a simple floor plan can also help determine whether the 2.8mm view is suitable.
Need help specifying the Hanwha HCD-7010RA?
Share your recorder model, camera quantity, site location, cable condition and required viewing areas. FourTeck can help you confirm whether this 4MP analog dome is appropriate and prepare a quotation based on the actual project scope.
Reviews
There are no reviews yet.