Hanwha HCD-7030RA Dubai

Hanwha HCD-7030RA 4MP Analog IR Dome Camera Dubai

The Hanwha HCD-7030RA is a 4MP indoor AHD infrared dome camera built for sites that want to retain coaxial CCTV infrastructure while improving image detail. It records up to 2560 × 1440 resolution, uses a 6.0mm fixed lens for a tighter viewing angle, provides infrared visibility up to 30m, and supports video transmission up to 500m over suitable 5C2V coaxial cable. Contact FourTeck for recorder compatibility, quantity planning, installation scope and current Dubai quotation.

SKU: HANWHA-HCD-7030RA-DUBAI Category: Brand:
4MP AHD • Indoor Dome • 30m IR

Hanwha HCD-7030RA Dubai

The Hanwha Vision HCD-7030RA is a QHD 4MP analog HD infrared dome camera designed for indoor surveillance projects that need detailed 2560 × 1440 video without replacing an existing coaxial cable path. Its 6.0mm fixed lens gives a comparatively tighter field of view, while integrated IR supports viewing up to 30 metres in darkness. It is a practical choice for corridors, controlled entrances, reception approaches, cashier zones, internal storage areas and other indoor positions where the camera should concentrate on a defined scene rather than cover a very wide room.

Hanwha dome cameras for Dubai CCTV projects

Quick Product Summary

Resolution
2560 × 1440 (4MP/QHD)
Lens
6.0mm fixed, F2.0
Night View
IR up to 30m
Signal
AHD over BNC
Power
12V DC, max. 5W
Best Fit
Indoor coax CCTV upgrades

Product Overview and Buyer Fit

The HCD-7030RA sits in Hanwha Vision’s analog HD camera family and is best understood as a high-resolution indoor dome for customers who already have, or intentionally prefer, coaxial CCTV cabling. Instead of transmitting video as an IP stream over Ethernet, the camera delivers AHD video through BNC coax. This distinction matters because it affects the recorder, cabling, power design and remote-viewing architecture. A buyer should therefore confirm that the selected DVR or hybrid recorder supports the required AHD resolution and frame rate before ordering.

Its 6.0mm fixed lens produces a horizontal field of view of roughly 49 degrees, making it more focused than the wider 2.8mm or 4mm versions in the same family. That can be useful where the objective is to observe a narrower doorway, internal passage, queue line, counter approach, secure-room entrance or a target area positioned farther from the mounting point. It is less appropriate where one camera needs to cover a broad lobby or an entire small room from a corner. The correct lens choice should be made from the required scene width and mounting distance rather than from resolution alone.

The camera also includes automatic day/night switching with an infrared-cut filter, digital wide dynamic range, backlight/highlight compensation options, 2D digital noise reduction, motion detection and privacy masking. These functions help adapt the picture to mixed lighting and common indoor surveillance conditions. Integrated IR extends viewing to approximately 30m in darkness, although practical identification distance depends on scene reflectivity, mounting angle, target size and ambient lighting. The plastic indoor housing should not be treated as an IP66 or IK10 exterior camera; exposed or vandal-prone installations should be matched with a suitable HCV or HCO family model instead.

Key Features and Business Benefits

4MP Detail on Coax

The 2560 × 1440 output gives substantially more scene detail than legacy standard-definition analog cameras while allowing many sites to reuse existing coaxial pathways.

6mm Focused View

A 6.0mm fixed lens narrows the scene compared with wider dome lenses, helping concentrate pixels on a doorway, corridor segment, counter or defined operational area.

30m Infrared

Built-in infrared illumination supports monitoring in very low light and darkness, reducing the need for constant visible lighting in suitable indoor areas.

Long Coax Reach

Hanwha specifies video transmission up to 500m using suitable 5C2V coaxial cable, useful for facilities where camera-to-recorder distances are significant.

AHD + Service CVBS

The main BNC AHD output is complemented by a CVBS installation output, helping technicians commission and aim the camera during setup.

Low Power Requirement

The camera operates from 12V DC with maximum consumption around 5W, simplifying power-budget planning for multi-camera analog installations.

Verified Technical Specifications

Specification Hanwha HCD-7030RA
Camera type QHD 4MP analog IR indoor dome
Image sensor 1/3-inch 4MP CMOS
Resolution 2560 × 1440
Maximum frame rate 30fps NTSC / 25fps PAL
Minimum illumination 0.27 lux colour at F2.0; 0 lux with IR on
Lens 6.0mm fixed, F2.0
Field of view H 49.02° / V 27.61° / D 55.60°
Minimum object distance 0.5m
IR viewable length Up to 30m
Video output BNC AHD; additional CVBS for installation
Transmission distance Up to 500m on suitable 5C2V coaxial cable
Day/Night Auto ICR
Image functions BLC, HLC, DWDR, 2D DNR, motion detection, privacy masking
Power 12V DC, max. 5W
Operating temperature -10°C to +55°C
Dimensions / weight Ø110.1 × 86.1mm / approx. 240g
Housing Ivory plastic, indoor use

Compatibility, Configuration and Deployment Guidance

The first compatibility check is the recorder. The HCD-7030RA is an AHD analog camera, so buyers should confirm that the DVR or hybrid recorder accepts 4MP AHD input at the required frame rate. An IP-only NVR is not a direct substitute unless a compatible encoder is introduced. Remote mobile viewing, user permissions and storage retention are normally functions of the recorder platform rather than the camera itself, so the final user experience depends heavily on DVR selection.

The second check is cabling. Existing coax can be a strong reason to select this model, but cable type, connector condition, distance, interference and power delivery must be assessed. Hanwha publishes transmission up to 500m on 5C2V coax, but real installations should be tested rather than assuming every old cable run will perform identically. Separate 12V DC power is required, and voltage drop should be considered on long power runs. For upgrades, technicians should inspect BNC terminations and verify the recorder’s signal-mode settings.

The third check is lens geometry. A 6mm lens is not a universal indoor choice. It is useful where a tighter view is desirable, but a buyer wanting broader coverage may be better served by the HCD-7010RA with a 2.8mm lens, the HCD-7020RA with a 4mm lens, or a varifocal model. Camera placement should be planned around the object width that must be visible at the intended distance. A high-resolution camera mounted with an unsuitable lens can still fail the operational objective.

Finally, remember the environmental classification. HCD denotes the indoor dome form in this family. For exposed outdoor entrances, loading zones, parking areas or locations that need vandal resistance, review HCV vandal-resistant domes or HCO bullet models. Avoid installing an indoor plastic dome in a position exposed to rain, dust ingress, wash-down, direct weather or deliberate impact.

Ideal Customers and Use Cases

  • Offices and professional premises: corridor intersections, reception approaches, internal entry points and controlled rooms where a focused indoor view is preferred.
  • Retail and cashier environments: defined counter approaches, internal aisles or transaction-support zones where 4MP detail is useful and existing coax can be retained.
  • Warehouses and stock rooms: indoor doors, cage areas, inventory aisles and dispatch checkpoints, provided the selected 6mm viewing angle suits the mounting distance.
  • Hotels and hospitality: back-of-house passages, service corridors and non-exposed internal areas that require low-light monitoring.
  • Education and institutional sites: internal circulation paths, administrative sections and controlled indoor entrances where coaxial infrastructure is already present.
  • Legacy CCTV modernization: properties seeking a staged improvement from lower-resolution analog video while avoiding immediate replacement of every coax cable.

What to Confirm Before Ordering

✓ Recorder supports 4MP AHD input
✓ 6mm lens matches target width and distance
✓ Installation location is indoors/protected
✓ Coax type and BNC condition are suitable
✓ 12V DC power design and voltage drop are checked
✓ Required storage retention is sized at the DVR
✓ Quantity, mounts and accessories are confirmed
✓ Current availability and warranty terms are confirmed on quotation

Comparison and Related-Model Guidance

Within the HCD-70x0RA family, the main practical difference for many buyers is lens width and corresponding infrared range. HCD-7010RA uses a 2.8mm fixed lens and is suited to wider indoor scenes, with IR up to around 20m. HCD-7020RA uses a 4mm fixed lens and sits between broad coverage and tighter observation, with IR up to around 25m. HCD-7030RA uses the 6mm fixed lens and delivers the narrowest view of the three, with IR up to around 30m. This makes the 7030RA attractive when the subject area is relatively narrow or farther from the camera.

If the position is outdoors or more vulnerable to impact, the HCV family provides vandal-resistant dome variants and the HCO family provides bullet variants. For projects moving fully to IP surveillance, a Hanwha network camera should be evaluated instead because it changes the architecture to Ethernet, often with PoE, NVR/VMS integration and network-based features. FourTeck can help compare whether retaining coax with AHD or migrating to IP is the better choice for the actual site.

Hanwha HCD-7030RA Dubai

Dubai buyers often approach the HCD-7030RA from one of two directions: either an existing analog CCTV site needs better image quality without a full recabling project, or a new indoor surveillance position needs a focused camera view while the wider security platform still uses a DVR. The HCD-7030RA suits both conversations because its AHD architecture keeps coax in the design while moving image resolution to 4MP. For offices in Business Bay, Deira, Bur Dubai, Jebel Ali, Al Quoz, Dubai Investment Park and other commercial zones, this can be relevant where cable routes already exist through finished ceilings or long internal corridors and replacing them would add unnecessary disruption.

The 6mm lens deserves particular attention in Dubai site planning. It is not the broadest lens in the family; instead, it concentrates the scene into an approximately 49-degree horizontal view. That makes it more appropriate for internal doors, corridor sections, cashier approaches, access-controlled rooms and defined storage lanes than for a wide reception area where a 2.8mm camera could capture more of the room. FourTeck recommends sharing an approximate mounting distance and required scene width before finalizing the model. This simple step can prevent buying a camera that is technically compatible but optically wrong for the site.

Dubai buyers also commonly ask about night performance, recorder support, existing cable condition, quotation, current availability and installation. The camera includes IR illumination up to 30m and automatic day/night switching, but the practical outcome depends on mounting height, reflective surfaces and the scene. Recorder compatibility must be verified because this is an AHD camera rather than an IP network camera. Contact FourTeck through the UAE sales route for model review, DVR compatibility checks, CCTV layout planning and a current quotation. Availability, project lead time and warranty handling should be confirmed on the actual commercial offer rather than assumed from online listings.

Hanwha HCD-7030RA UAE

Across the UAE, the HCD-7030RA can be useful for organizations standardizing or extending an analog HD surveillance system across multiple facilities. A company may have a Dubai head office, a warehouse in Sharjah, a branch in Abu Dhabi and operational premises in Ajman or Ras Al Khaimah. If those sites already use compatible AHD DVRs and coaxial cabling, keeping a consistent camera family can simplify maintenance and spare-device planning. The HCD-7030RA provides 4MP resolution and a 6mm fixed lens for more focused indoor viewpoints, while related 2.8mm and 4mm versions can cover wider scenes within the same general camera family.

UAE procurement teams should distinguish camera selection from complete system design. A camera quote alone does not confirm the recorder channel capacity, hard-disk retention period, monitor arrangement, remote access method, backup power or installation accessories. For an existing DVR, the exact model and firmware should be reviewed for 4MP AHD support. For a new system, storage should be sized from camera count, recording schedule, quality settings and required retention days. The 12V DC power arrangement also needs planning, especially where cameras are distributed across a large facility.

Environmental fit is another UAE-specific consideration. Although the HCD-7030RA operates across a broad published temperature range, its housing is an indoor plastic dome and should not be selected for exposed outdoor UAE heat, dust, rain or impact risk simply because the electronics have a temperature specification. Exterior entrances, parking, yards and industrial perimeter positions should use an appropriate outdoor-rated camera. FourTeck can help UAE buyers review whether HCD, HCV, HCO or an IP camera family is the correct fit. Use FourTeck UAE or contact FourTeck sales to discuss quantity, recorder compatibility, site conditions and a current commercial quotation.

Hanwha HCD-7030RA Kenya

Kenya buyers considering the Hanwha HCD-7030RA often need a dependable path for improving existing coax CCTV in offices, retail premises, schools, hospitality sites, warehouses and administrative facilities. Where coax runs are already installed and still electrically sound, an AHD upgrade can avoid the cost and disruption of changing every camera point to Ethernet. The 4MP HCD-7030RA is especially relevant for indoor positions where a narrower 6mm view is useful, such as long corridors, restricted doors, cash-office approaches, stock-room aisles or a reception entry observed from farther back.

Before a Kenya order is finalized, the recorder should be treated as the first compatibility item. The camera is not an IP/PoE unit; it outputs AHD over BNC and needs 12V DC power. A DVR or hybrid recorder must support the 4MP AHD signal. If the site uses older analog-only recording hardware, replacing the camera alone may not produce the intended result. Cable quality is equally important. Existing coax should be inspected for corrosion, poor BNC terminations, splices, interference and attenuation, particularly on long runs or older installations. Hanwha specifies long-distance transmission on suitable coax, but actual site cabling should always be tested.

Kenyan organizations with several branches may also compare analog continuity against migration to IP. If the objective is to reuse substantial coax infrastructure, the HCD-7030RA can be a rational choice. If the organization expects analytics, PoE switching, network-based recording or a large-scale VMS roadmap, an IP camera platform may be more suitable. FourTeck can discuss both paths rather than forcing one architecture. For Kenya enquiries, use FourTeck Kenya to request model guidance, recorder checks and quotation support. Confirm final availability, import lead time, warranty terms and installation scope on the project quotation.

Hanwha HCD-7030RA Kuwait

Kuwait CCTV buyers may select the Hanwha HCD-7030RA for indoor commercial surveillance where existing coaxial cabling remains serviceable and 4MP detail is desired. The model’s 6mm fixed lens is suited to comparatively narrow scenes, making it relevant to internal access points, office corridors, cashier approaches, warehouse lanes and controlled-room entrances. The 30m IR capability supports low-light or lights-off monitoring, but the camera should be positioned carefully to avoid excessive reflection from nearby walls, glossy surfaces or objects close to the lens.

A frequent procurement mistake is to focus on camera resolution without checking the rest of the CCTV chain. In Kuwait projects, buyers should confirm the DVR’s AHD input capability, available channels, hard-disk retention, remote viewing requirements, power arrangement and display outputs. The HCD-7030RA requires 12V DC and uses BNC AHD rather than Ethernet/PoE. Existing cable runs can be valuable, especially in occupied offices or finished buildings, but old coax and connectors should be tested. Where a project includes both legacy and new camera points, a hybrid recorder architecture may provide a phased migration route.

The HCD-7030RA is an indoor dome, so it should not be chosen for exposed outdoor Kuwait locations merely because it has a wide operating temperature range. Outdoor gates, car parks, façades and dusty exterior environments require a housing specifically rated for weather and, where relevant, impact resistance. Related HCV vandal domes and HCO bullets may be better starting points. For Kuwait procurement, project quantities, compatible DVR models, accessories, cable conditions and installation requirements should be defined before commercial approval. Contact FourTeck Kuwait for product sourcing discussion and quotation support, with current availability and warranty route confirmed on the final offer.

Hanwha HCD-7030RA Ghana

In Ghana, the HCD-7030RA can fit businesses and institutions that want to modernize indoor surveillance while preserving existing coaxial routes. Commercial offices, schools, retail outlets, hotels, clinics, warehouses and branch facilities may already have analog cabling embedded in ceilings and conduits. Where that cable remains in good condition, moving to a 4MP AHD camera can increase recorded detail without requiring a complete network-camera conversion at every point. The HCD-7030RA’s 6mm lens should be selected when the target area is narrower or farther from the camera, not simply because it is the highest focal length in the family.

Project planners should map each camera position to an operational objective. A wide lobby may need a shorter focal length; an internal corridor, cash-office door or storage aisle may benefit from the tighter HCD-7030RA view. Lighting also matters. The camera provides automatic day/night operation and up to 30m infrared, but real night-image performance depends on scene surfaces and positioning. For entrances with bright external daylight behind people, DWDR and backlight controls can help, although correct camera angle remains important.

Recorder and power compatibility need to be confirmed before shipment. HCD-7030RA is an AHD BNC camera, not a PoE IP camera. The DVR must accept its 4MP signal, and the 12V DC power design must account for run length and voltage drop. Buyers with older DVRs should provide the exact recorder model so compatibility can be reviewed. Where Ghana organizations are planning a larger modernization program, FourTeck can also help compare staying with AHD against moving to network cameras and NVR/VMS infrastructure. Use FourTeck Ghana for regional enquiries, quantity planning and quotation support. Final availability, shipping, installation responsibility and warranty terms should be confirmed in writing for the specific order.

Hanwha HCD-7030RA Uganda

Uganda customers evaluating the Hanwha HCD-7030RA may be looking for an indoor CCTV camera that raises image resolution while working with an established coax environment. This can be particularly useful for organizations that have already invested in cable pathways across offices, schools, hospitality properties, healthcare administration, warehouses or retail branches. Reusing viable coax can reduce building disruption, but it should not be assumed that every old cable run is suitable. BNC connectors, cable joints, interference and attenuation should be inspected before an upgrade is approved.

The HCD-7030RA records at 4MP resolution and has a 6.0mm fixed lens. That lens gives a focused scene rather than a very wide one, so Uganda buyers should define exactly what the camera needs to see. A long internal corridor, stock-room aisle, controlled doorway or cashier approach can be a good match. A broad reception, classroom or open-plan room may need a wider lens from the same family. The camera also provides integrated IR up to 30m and automatic day/night operation for low-light monitoring, but lighting layout and nearby reflective surfaces still influence image quality.

The recording platform is central to a successful deployment. This is an AHD camera using BNC, so a suitable DVR or hybrid recorder is required. An NVR designed only for network cameras will not directly accept the signal. Storage capacity should be sized according to the number of cameras, recording schedule and retention target. Power is 12V DC, so long-distance power cabling must be planned separately. For outdoor or vandal-prone Ugandan positions, select a purpose-built HCV or HCO model instead of treating the indoor HCD housing as weatherproof. Contact FourTeck Uganda for model comparison, quantity discussion and quotation support, with current stock, logistics and warranty route confirmed for the actual order.

Hanwha HCD-7030RA Nigeria

Nigeria organizations upgrading established CCTV can use the HCD-7030RA as part of a staged path from older analog video to higher-resolution AHD, especially where the cost or disruption of replacing embedded coax would be significant. Offices, retail groups, schools, hospitality properties, warehouses and controlled internal operational areas may benefit from retaining viable cabling while upgrading the camera and recorder layer. The 4MP image provides more detail than legacy analog formats, while the 6mm lens concentrates the field of view for targeted positions such as entrances, corridors, cash handling approaches or storage aisles.

For Nigerian buyers, system resilience should be discussed alongside camera specifications. The camera itself requires 12V DC power, and the DVR, display and supporting equipment should be included in any UPS or backup-power design where recording continuity matters. Voltage stability and cable quality can affect the entire system. The HCD-7030RA’s AHD signal is carried over BNC coax, so the DVR must explicitly support the required resolution. A procurement team should avoid assuming compatibility simply because both devices are described as analog CCTV.

Lens selection and environmental fit are equally important. The 6mm lens is narrower than the 2.8mm and 4mm alternatives in the family. It is useful when more of the available pixels should be concentrated on a smaller scene, but can be too tight for broad rooms. The HCD housing is intended for indoor locations; exposed outdoor positions should use a weather-rated model. FourTeck can help buyers compare the HCD-7010RA, HCD-7020RA, HCD-7030RA and suitable outdoor or IP alternatives around the actual site objective. Nigeria enquiries can be directed through FourTeck Nigeria. Provide recorder model, quantity, site type, camera distance and required viewing area for a more accurate commercial and technical review.

Hanwha HCD-7030RA Seychelles

Seychelles buyers may consider the Hanwha HCD-7030RA for indoor surveillance positions in hotels, offices, retail areas, administrative buildings, service facilities and other premises where coaxial CCTV infrastructure is already available. On island projects, avoiding unnecessary recabling can be valuable when routes pass through completed interiors or where project logistics make major infrastructure changes less convenient. The HCD-7030RA supports that approach by providing a 4MP AHD signal over coax while using a compact indoor dome form.

The model should be chosen for its viewing geometry as much as for its resolution. A 6mm fixed lens gives an approximately 49-degree horizontal field, which is more focused than the 2.8mm and 4mm HCD variants. That can work well for a corridor, doorway, controlled access point or a defined portion of a retail or service area. For wide interior spaces, another lens may provide better coverage. Infrared extends viewing to about 30m in darkness, but careful placement is needed in confined indoor areas because close walls, glossy surfaces or light-coloured objects can reflect IR back toward the camera.

Seychelles projects also need a clear compatibility and logistics checklist. The recorder must support 4MP AHD input, 12V DC power must be available, existing coax should be tested, and storage retention should be planned at the DVR. Because this HCD model is an indoor plastic dome, it should not be used in exposed coastal or outdoor positions where moisture, salt-laden air, rain or impact are concerns; a properly rated exterior camera is required for those areas. FourTeck supports regional enquiries through FourTeck Africa. Buyers can share project quantity, intended location, recorder details and installation scope to review the correct model and obtain a current quotation with shipping and warranty terms confirmed for the order.

Related FourTeck Products and CCTV Resources

FourTeck’s current indexed website provides broader CCTV and integrated-security resources that can help buyers place the HCD-7030RA in a complete project. Exact same-site Hanwha model product pages were not verifiable during preparation, so no product URL has been invented. Use the following verified resources for adjacent planning while requesting the exact camera model through sales.

CCTV and Access Control Systems UAE

Overview of CCTV camera types, recorders, storage, access control and surveillance planning for UAE projects.

Explore CCTV and access control solutions

CCTV Installation Dubai UAE

Project guidance covering analog HD, IP CCTV, hybrid recording, cabling, storage and camera placement.

Plan a Dubai CCTV installation

Networking, Firewalls and Switches UAE

Useful for buyers planning network infrastructure around hybrid or future IP surveillance environments.

Review business network infrastructure

Regional FourTeck Resources

For Dubai and UAE projects, buyers can use FourTeck.com and FourTeck UAE. Regional procurement and project enquiries can be routed through FourTeck Kenya, FourTeck Kuwait, FourTeck Ghana, FourTeck Uganda, FourTeck Nigeria and FourTeck Africa. These links help procurement teams reach the most relevant enquiry route without implying local stock, offices or fixed delivery times.

Why Contact FourTeck

A CCTV camera purchase is most successful when the lens, recorder, cabling, power, storage and installation environment are checked together. FourTeck can assist with product-selection discussions, DVR compatibility review, CCTV design considerations, quotation preparation and deployment coordination based on the final project scope. For the HCD-7030RA, share the camera quantity, existing recorder model, cable type, mounting location, approximate viewing distance and required scene width. That information makes it easier to determine whether the 6mm HCD-7030RA is the correct model or whether a wider HCD, outdoor-rated HCV/HCO or IP camera would better meet the requirement.

Hanwha HCD-7030RA FAQs

1. Is the HCD-7030RA an IP camera?

No. The Hanwha HCD-7030RA is a 4MP AHD analog camera that outputs video through BNC coax. It is not a PoE network camera. It should be connected to a compatible AHD DVR or hybrid recorder that supports its resolution. If your project uses only an IP NVR and Ethernet/PoE cabling, review a Hanwha network-camera model instead.

2. What resolution does the HCD-7030RA provide?

The camera provides QHD 2560 × 1440 video, commonly described as 4MP. Hanwha specifies up to 30fps in NTSC or 25fps in PAL. The DVR must support the corresponding AHD input format; camera resolution alone does not guarantee that an older recorder can display or record the full signal.

3. How wide is the 6mm lens?

The 6.0mm fixed lens provides a horizontal field of view of about 49 degrees, with approximately 27.6 degrees vertical and 55.6 degrees diagonal. This is a relatively focused view compared with 2.8mm or 4mm lenses, so it works well for corridors, doors and defined target areas but may be too narrow for a broad room.

4. How far can the infrared night view reach?

Hanwha rates the HCD-7030RA IR viewable length at up to 30m. Practical visibility and identification distance depend on mounting height, target size, wall and floor reflectivity, ambient lighting and scene geometry. Avoid placing bright reflective objects immediately in front of the dome because excessive IR reflection can reduce useful image detail.

5. Can I use the HCD-7030RA outdoors?

It should be treated as an indoor camera. The HCD-7030RA has a plastic indoor dome housing and is not presented as an IP66/IK10 weather- and vandal-rated model. For exposed exterior locations, review a Hanwha HCV vandal dome, HCO bullet or another camera with the environmental protection required by the site.

6. Can the camera reuse existing coaxial cable?

Often yes, which is one of the main reasons to choose AHD. Hanwha specifies video transmission up to 500m over suitable 5C2V coax. Existing cable condition still matters: old connectors, poor splices, interference or unsuitable cable can affect performance. Test the actual run and confirm the DVR before relying on legacy infrastructure.

7. What power does the HCD-7030RA need?

The camera uses 12V DC and is rated at a maximum power consumption of approximately 5W. Power is separate from the coax video path, so the installation must include a suitable DC supply and cable. On long power runs, calculate voltage drop rather than assuming the camera will receive the correct voltage at the endpoint.

8. Does the HCD-7030RA support wide dynamic range?

The camera provides digital wide dynamic range (DWDR) along with backlight and highlight compensation options. These controls can improve scenes where bright and dark regions coexist, such as an interior camera facing a lit entrance. They are useful processing tools, but correct camera placement and scene lighting remain important for consistent evidence quality.

9. Which HCD lens should I choose: 2.8mm, 4mm or 6mm?

Choose from the required scene width and camera distance. The HCD-7010RA 2.8mm version is the widest, HCD-7020RA 4mm is intermediate, and HCD-7030RA 6mm is the tightest. The 6mm model is useful when you want to focus on a narrower target zone. Share mounting distance and desired coverage width before ordering.

10. How do I request a Dubai quote for the HCD-7030RA?

Contact FourTeck with the product model, quantity, delivery location, existing DVR model if any, installation requirement and preferred project timeline. FourTeck can review the compatibility questions and prepare a commercial response. Current stock, lead time, warranty route and final project scope should be confirmed on the quotation because these can change.

Need Help with Hanwha HCD-7030RA Dubai?

Share your required quantity, existing DVR model, cable type, mounting distance and site location. FourTeck can help determine whether the HCD-7030RA 6mm indoor dome is the right camera for the scene and prepare a current quotation based on the requested scope.

Contact FourTeck Sales

Need product assistance?Request a Quote

Reviews

There are no reviews yet.

Be the first to review “Hanwha HCD-7030RA Dubai”

Your email address will not be published. Required fields are marked *

Scroll to Top