Quick product summary

Product overview and buyer-fit guidance

The QNO-6072R1 sits in Hanwha Vision’s Q-series family as a practical 1080p bullet camera for buyers who value a configurable field of view more than ultra-high resolution. The 1/2.8-inch 2MP CMOS sensor supports a maximum 1920 × 1080 image and up to 30 frames per second in H.265 or H.264. The camera also supports MJPEG and multiple streaming, allowing system designers to balance live-view quality, recording bandwidth and secondary streams for mobile or remote use.

A key reason to choose this model is the 3.2–10mm manual varifocal lens. Instead of committing to one fixed viewing angle before installation, the installer can adjust framing on site. At the wide end, the horizontal field of view is approximately 109 degrees; at the tele end it narrows to about 33.2 degrees. That range can work well for building approaches, loading bays, warehouse aisles, gates, parking access, compound boundaries and other scenes where a fixed 2.8mm or 4mm lens may be either too wide or too tight.

The QNO-6072R1 is not an audio camera. Buyers needing microphone capture, speaker functions, advanced AI object classification or higher pixel density should compare other Hanwha models rather than assuming this unit provides those capabilities. For general video monitoring, however, the camera adds motion detection, tampering detection, defocus detection, directional detection, enter/exit analytics and virtual-line functions, along with hallway view, lens distortion correction, WDR and privacy masking.

Key features and business benefits

Verified technical specifications

Specifications should be checked against the current Hanwha Vision documentation at ordering time because manufacturers may update firmware, regional certifications, accessories or published electrical figures.

Compatibility, configuration and deployment guidance

Before buying the QNO-6072R1, confirm the recording platform, PoE switch capacity, storage target, mounting position, cable route and intended scene. ONVIF support can simplify integration with compatible video systems, but buyers should still validate the exact NVR or VMS combination, supported codec profiles, event integration and firmware level. If the project uses Hanwha recorders or software, confirm channel licensing and supported camera lists for the selected platform.

For PoE deployments, calculate both port count and switch power budget. The camera uses standard PoE, but a complete CCTV network may include dozens of cameras, wireless links, access-control devices or intercoms sharing a switch. Segmented VLANs, proper uplinks and sufficient backhaul capacity reduce the chance that surveillance traffic competes with office applications. FourTeck can also help review suitable network switching through its Dubai network switch planning page.

Outdoor installation should also consider junction boxes, conduit, cable glands, grounding practices, surge protection, mounting height and service access. IP66 and IK10 describe the camera enclosure’s tested protection; they do not make poor cable terminations or exposed connectors weatherproof. In hot or dusty locations, installers should follow manufacturer operating limits and ensure that mounting does not trap excessive heat.

Ideal customers and use cases

• Warehouses and logistics: monitor loading docks, yard approaches, dispatch doors and aisle endpoints where an adjustable field of view is useful.
• Retail and commercial buildings: cover shop approaches, service entrances, back-of-house zones and external walkways.
• Factories and industrial sites: use the IP66/IK10 enclosure in appropriate outdoor or semi-exposed locations, subject to environmental and compliance review.
• Schools and campuses: support perimeter, gate and building-entry monitoring while respecting local privacy and retention requirements.
• Hospitality and property management: monitor service roads, parking access and building approaches where 1080p footage is sufficient for the design objective.

What to confirm before ordering

• Required pixel density at the target distance, not just the headline 2MP resolution.
• Whether 3.2–10mm manual varifocal adjustment matches the required scene width and identification distance.
• Current availability, quantity, lead time and commercial terms through the quotation.
• NVR/VMS compatibility, ONVIF functions, codec support and firmware level.
• PoE port count, total power budget and network uplink capacity.
• Storage days, recording frame rate, bitrate, motion/event policy and any microSD requirement.
• Outdoor mounting accessories, junction box, conduit and surge-protection requirements.
• Dubai SIRA or other authority requirements applicable to the project and the current approval status of the proposed equipment.

Comparison and related-model guidance

The QNO-6072R1 should be compared on lens type, form factor and scene requirements rather than on resolution alone. The QNO-6032R1 is a 2MP IR bullet camera with a fixed 6mm lens, making it more straightforward where a narrower fixed view is already known. The QNV-6072R1 uses a vandal-dome format with similar 2MP and varifocal positioning, which can suit locations where a dome profile is preferred. Indoor dome options in the same family can be more discreet for ceilings and interior corridors. Buyers who need higher resolution, motorized optical adjustment, stronger analytics or audio should move up to a different Hanwha family instead of forcing this model into an unsuitable requirement.

For Dubai procurement, the QNO-6072R1 also appears in SIRA’s published approved-camera list under approval number SIRA/2023/7/07277. Because authority lists and project rules can change, this should be treated as a useful reference rather than a permanent guarantee. Confirm the current SIRA requirement, approved configuration and installer obligations for the specific site before purchase or installation.

Hanwha QNO-6072R1 Dubai

Dubai buyers searching for the Hanwha QNO-6072R1 usually need more than a camera specification sheet. Commercial projects often begin with a practical question: will this model give the right angle, usable night detail and reliable outdoor performance at the intended entrance, boundary, warehouse or parking point? The QNO-6072R1 is attractive when a 2MP bullet camera is adequate and the installer needs to tune the lens between 3.2mm and 10mm rather than commit to a single fixed focal length. This is especially relevant for Dubai sites where cameras may be mounted on façades, canopies, loading-bay walls, service yards, gates or external corridors, each with different viewing distances.

Dubai deployments also need careful attention to heat, dust, cabling and authority compliance. The published operating range reaches +55°C and the enclosure is rated IP66 and IK10, but installation quality still determines whether connectors, junctions and cable routes remain protected. For outdoor projects, ask the installer to confirm conduit entry, weather sealing, surge protection and maintenance access. A shaded or thermally sensible location is preferable where practical. Do not assume that an environmental rating compensates for exposed RJ-45 couplers or poorly sealed junction boxes.

For network design, PoE makes the model straightforward to integrate into a structured IP CCTV deployment. One Ethernet cable can deliver network connectivity and power from a suitable PoE switch. However, Dubai offices, warehouses and retail sites often run CCTV alongside Wi-Fi, VoIP, access control and business LAN traffic, so switch capacity should be planned rather than improvised. Separate CCTV VLANs, correctly sized uplinks and recording bandwidth help maintain predictable performance. FourTeck’s CCTV installation guidance for Dubai can help buyers map the camera choice to the wider system.

SIRA requirements are another important Dubai-specific point. The QNO-6072R1 appears in a published SIRA approved-camera list, but buyers should confirm the current approval status and all project-specific rules before placing an order. Some sites may require approved system designs, certified installation companies, defined retention periods or additional controls depending on sector and location. For a quote, share the number of cameras, mounting heights, approximate viewing distances, indoor/outdoor mix, recorder preference, storage days and whether the site falls under a regulated CCTV category. That gives FourTeck a clearer basis for recommending the camera quantity, recorder capacity, PoE switching and accessories.

Hanwha QNO-6072R1 UAE

Across the UAE, the QNO-6072R1 can fit distributed security projects where organizations want a standardized 2MP outdoor bullet camera with adjustable optics. A company with branches in Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah or other Emirates may value a consistent camera model because it simplifies spares, documentation, installer training and recorder templates. Before standardizing, however, check that the 2MP resolution and 3.2–10mm manual varifocal range meet each site’s scene requirements. A warehouse yard, office entrance and retail loading area may need very different pixel density even if all three use bullet cameras.

UAE buyers frequently compare cameras by megapixels, but focal length, lighting, scene depth and target size matter just as much. At the wide end, the QNO-6072R1 sees a broad scene; at the tele end it concentrates pixels on a narrower area. That makes it useful for installers who need some adjustment after mounting, though the lens is manually adjusted rather than a motorized remote zoom. For multi-site rollouts, include a commissioning checklist so every camera is focused, framed, timestamped, named and recorded consistently.

Storage planning should be completed before the purchase order. H.265 can reduce bandwidth compared with older compression approaches, but actual storage still depends on scene complexity, bitrate, frame rate, recording schedule and retention target. Edge storage up to 128GB can support local recording strategies, but it should not automatically replace centralized NVR or VMS storage in a business-critical system. Decide whether the microSD card will be used for event capture, failover, standalone recording or another defined purpose.

FourTeck can discuss UAE requirements through FourTeck UAE and broader infrastructure planning through FourTeck.com. For multi-emirate procurement, share the site list, camera counts, deployment schedule, recorder model, network design and support expectations. This helps avoid quoting only the camera body when the real project also needs junction boxes, PoE switches, fiber uplinks, racks, UPS capacity, storage drives, monitoring displays or access-control integration. Final availability, warranty route and delivery terms should always be confirmed in the quotation rather than assumed from a web page.

Hanwha QNO-6072R1 Kenya

Kenyan organizations considering the Hanwha QNO-6072R1 often need surveillance that can cover entrances, warehouse yards, education campuses, offices, logistics facilities and gated compounds without moving immediately to a high-resolution premium camera. The 2MP image, adjustable 3.2–10mm lens and 30m IR specification make the model worth evaluating when the project requires a focused fixed view and predictable night coverage. Because the lens is varifocal, an installer can adapt the camera to a wider gate area or a tighter target zone during commissioning.

For Nairobi and other urban projects, network quality is a major part of camera performance. PoE simplifies cabling, but camera traffic still needs reliable switching, good copper termination and stable uplinks to the recorder. Larger compounds may use fiber between buildings, which changes the bill of materials significantly. Before ordering, document where the recorder sits, which cameras share each switch, the longest copper run, whether any links cross between buildings, and how the system behaves during power interruption. UPS and backup-power planning can be as important as the camera itself where continuous monitoring is required.

Night performance should also be evaluated against the actual scene. The QNO-6072R1 provides IR to 30m, but reflective walls, nearby foliage, dust, vehicle headlights and very dark open spaces can affect usable images. Camera placement should minimize strong reflections and backlight. WDR can help with challenging contrast, yet good positioning remains the first design tool. If identification at long distance is critical, calculate pixel density rather than relying on the IR distance number.

Kenya procurement teams can use FourTeck Kenya to discuss regional requirements and FourTeck Africa for broader cross-border planning. When requesting a quote, include the delivery city, quantity, intended recorder or VMS, storage target, power environment and whether installation is part of the requirement. FourTeck can then help compare the QNO-6072R1 with related fixed-lens, dome or higher-resolution alternatives. Stock, freight, warranty path and project timelines should be confirmed specifically for the requested quantity and destination.

Hanwha QNO-6072R1 Kuwait

Kuwait buyers evaluating the QNO-6072R1 should pay close attention to outdoor operating conditions and installation details. The camera is specified for operation up to +55°C and carries IP66 and IK10 ratings, making it a candidate for many commercial exterior locations, but harsh sun, dust and exposed cable joints can still influence reliability. Good CCTV design places the camera where the scene is useful while also protecting connectors, allowing service access and avoiding unnecessary heat loading where possible.

The model’s 3.2–10mm manual varifocal lens is useful for compounds, loading areas, building approaches and parking access because the installer can fine-tune the angle after mounting. This is particularly helpful when drawings do not perfectly represent the final built environment. However, manual varifocal means the physical lens must be adjusted during commissioning; it should not be confused with a remotely motorized optical zoom. If the project requires frequent remote reframing, compare a different model with motorized optics or PTZ capability.

For night monitoring, the integrated IR specification reaches 30m. The practical image still depends on what the site needs to see. Detecting a person entering a zone requires less pixel density than identifying a face or reading a vehicle plate. Buyers should define the operational objective for each camera position. A camera designed for general situational awareness may be unsuitable for evidence-level identification at the same distance, even if the image looks clear on a monitor.

Kuwait procurement teams can contact FourTeck Kuwait for model and project discussions. Share camera quantity, mounting environment, expected retention, recorder platform, PoE switch availability and whether the cameras are part of a new or existing CCTV system. If integrating into an existing NVR or VMS, verify ONVIF functions and supported firmware before committing to a large quantity. Commercial terms such as current availability, shipping route, warranty handling and delivery timing should be confirmed in the final quote because they can vary by source and project.

Hanwha QNO-6072R1 Ghana

In Ghana, the Hanwha QNO-6072R1 can be considered for business compounds, offices, warehouses, retail facilities, education sites, industrial environments and logistics operations that need a fixed outdoor camera with adjustable framing. The combination of 2MP resolution, 30m IR and a 3.2–10mm varifocal lens is practical where the security team wants to balance image quality, bandwidth and cost without using a fixed wide-angle lens for every position.

For Accra and other locations with warm, humid or dusty conditions, proper installation matters. The IP66 enclosure rating helps against dust and water ingress at the camera body, but installers must still weatherproof cable entries and junction points. Conduit routes should avoid standing water and unnecessary exposure, and the network design should account for lightning or surge risk according to the site. Outdoor camera poles, building-to-building links and remote gates often require additional protection beyond the camera’s own enclosure rating.

Power continuity is another planning point. PoE can simplify deployment because one Ethernet cable carries both power and data, but the switch and recorder need stable power. If the site uses a UPS, generator or solar-backed infrastructure, calculate the runtime requirement for the complete CCTV system rather than only the cameras. A recorder, PoE switch, router, display and fiber equipment can consume more power than expected. Recording continuity during outages should be designed deliberately.

For Ghana enquiries, FourTeck Ghana provides a regional contact route, while FourTeck Africa can support wider project discussions. Buyers should share city, quantity, site type, camera locations, network topology and retention target. FourTeck can then help evaluate whether the QNO-6072R1 is the right fit or whether a fixed-lens, vandal-dome, higher-resolution or analytics-oriented model would be more suitable. Pricing, stock, freight and warranty arrangements should be confirmed for the actual order rather than assumed from generic market listings.

Hanwha QNO-6072R1 Uganda

Ugandan buyers looking at the Hanwha QNO-6072R1 may be planning CCTV for offices, compounds, schools, hotels, warehouses, retail businesses, health facilities or branch operations. In these settings, the camera’s strongest practical feature is its adjustable 3.2–10mm lens. It allows the installer to tune a fixed camera for a broad entrance or a more focused view without changing to another lens model. That can reduce design uncertainty when final mounting positions differ from early drawings.

For Kampala and regional sites, network and power planning should be treated as part of the surveillance design. PoE reduces the number of cables to each camera, but the central switch must have enough PoE budget and should be protected by suitable backup power if continuous recording matters. Where buildings are separated, fiber may be preferable to long copper runs. Remote branches can also require secure VPN access or centralized VMS connectivity, making firewall rules, internet reliability and bandwidth part of the camera project.

The QNO-6072R1 supports H.265 and H.264, which gives integrators flexibility when matching recorder capabilities and bandwidth targets. Before ordering, confirm whether the existing NVR supports the camera’s preferred codec, event features and stream count. Edge storage up to 128GB can add a local recording option, but its role should be defined. Some projects use microSD only for event backup; others rely on centralized recording for longer retention and easier evidence management.

Uganda customers can use FourTeck Uganda to discuss model suitability, quantities, accessories and project scope. A useful quote request includes the city, number of cameras, expected indoor/outdoor split, recording days, desired frame rate, approximate distances and whether installation or only supply is required. This information helps compare the QNO-6072R1 against dome cameras for lower-profile mounting or higher-resolution models where greater identification detail is needed. Confirm current availability, logistics and warranty handling in the final quotation.

Hanwha QNO-6072R1 Nigeria

Nigeria projects can vary dramatically in scale, from a few cameras at an office or retail site to large networks across warehouses, estates, manufacturing plants and branch locations. The QNO-6072R1 is best assessed as a reliable 2MP fixed bullet option rather than a one-size-fits-all surveillance camera. Its 3.2–10mm manual varifocal lens is useful when installers need flexibility during commissioning, while the 30m IR specification supports common night-monitoring scenarios around entrances, access roads and perimeter sections.

For Lagos, Abuja, Port Harcourt and other cities, power and network resilience can be central to system performance. PoE simplifies camera cabling, but the NVR, PoE switch, router and storage all need stable power. Where outages are a concern, design backup power around the entire surveillance stack and define how long recording must continue. If the site uses remote internet access, avoid exposing cameras directly to the public internet; use secure network practices, strong credentials, firmware maintenance and appropriate remote-access architecture.

Storage should be sized from the real recording policy. A 2MP stream can be economical compared with higher-resolution cameras, but continuous 30fps recording across many channels still creates substantial data. A project may reduce storage using H.265, lower frame rates, scheduled recording or event-based policies, provided these settings still satisfy the security objective. For sites where evidence retention is critical, calculate capacity before selecting drive size and NVR channel count.

Nigeria buyers can contact FourTeck Nigeria for regional discussions and FourTeck Africa for cross-border requirements. Share the quantity, city, site type, mounting environment, network layout, existing recorder and required retention. FourTeck can then help determine whether the QNO-6072R1 provides enough detail or whether a higher-resolution or analytics-enabled Hanwha camera would be more appropriate. Stock, delivery, freight, tax, warranty and installation terms should be confirmed specifically for the requested project.

Hanwha QNO-6072R1 Seychelles

Seychelles projects often place cameras in environments where humidity, coastal exposure and remote logistics deserve early attention. The QNO-6072R1 has an IP66 enclosure and IK10 impact rating, making it a potential option for protected exterior surveillance, but marine or salt-laden air can still require careful material selection, mounting practices and maintenance. Coastal installation is not the same as ordinary outdoor installation, so buyers should discuss the exact site exposure and any additional enclosure or corrosion-protection requirements with the installer.

For hotels, resorts, offices, warehouses, public-facing facilities and service areas, the camera’s 3.2–10mm manual varifocal lens helps tune coverage after mounting. This can be useful when landscaping, walls, vehicle lanes or architectural details change the real view from what was shown on drawings. The 30m IR specification supports night monitoring, but reflective surfaces, bright signage and nearby objects can affect infrared performance. A nighttime commissioning check is important rather than evaluating the scene only during daylight.

Because island projects can have longer replacement logistics, system design should include spares strategy, surge protection, stable PoE switching and backup power where continuity matters. A standardized camera family may simplify maintenance across several buildings or properties. Edge storage up to 128GB can provide an additional local recording option, but a centralized NVR or VMS may still be preferable for long retention, investigation and multi-camera playback. The right architecture depends on camera count and operational needs.

For Seychelles enquiries, use FourTeck Africa for regional project discussions. Provide island or delivery location, camera quantity, application, recorder platform, expected storage days and whether the requirement includes installation support. FourTeck can help compare the QNO-6072R1 with dome or higher-resolution alternatives and identify the supporting network equipment required. Because freight and availability can change, confirm shipping route, lead time, warranty handling and final commercial terms in the quotation rather than relying on generic online listings.

Related Hanwha camera guidance

FourTeck product-page links for these exact related models were not verifiable during preparation, so no guessed product URLs have been inserted.

Regional FourTeck resources

For Dubai and UAE technology infrastructure, visit FourTeck UAE or FourTeck.com. Regional project enquiries can use FourTeck Kenya, FourTeck Kuwait, FourTeck Ghana, FourTeck Uganda, FourTeck Nigeria and FourTeck Africa. These routes are useful for discussing camera quantities, recorder design, switching, storage, delivery destination and installation scope without assuming stock or local office presence.

Why contact FourTeck

A surveillance project succeeds when the camera, lens, network, storage and installation method match the site. FourTeck can help buyers review the requirement before procurement, including camera selection, PoE switching, NVR sizing, storage planning, cabling and integration with wider IT infrastructure. The FourTeck website states that its service approach covers consultation, product recommendation, supply coordination, installation, configuration, testing and support for business technology projects. Exact scope, location coverage and commercial terms should be confirmed for each order.

Frequently asked questions

Is the Hanwha QNO-6072R1 a 2MP camera?

Yes. The QNO-6072R1 uses a 1/2.8-inch 2MP CMOS sensor and supports a maximum 1920 × 1080 image. It can deliver up to 30fps in H.265 or H.264 under the appropriate 60Hz configuration. Whether 2MP is sufficient depends on the target distance and the level of detail the project needs.

How far can the QNO-6072R1 see at night?

Hanwha documentation specifies an IR viewable length of up to 30m. That number describes infrared illumination range, not guaranteed identification distance. Real results depend on scene reflectivity, camera angle, lens setting, target size, ambient light and required pixel density. A nighttime commissioning test is recommended for critical positions.

Does the QNO-6072R1 support PoE?

Yes. The camera supports PoE based on IEEE 802.3af Class 3 and also supports 12VDC input. PoE is convenient because a suitable switch can deliver power and network data on one Ethernet cable. The overall PoE budget must still be checked when many cameras share one switch.

Is the QNO-6072R1 suitable for outdoor use?

The camera is rated IP66 for ingress protection and IK10 for impact resistance, so it is designed for many outdoor and exposed applications. Correct installation remains important: cable entries, connectors, junction boxes and mounting hardware must be protected appropriately, and the stated operating temperature range should be respected.

What lens does the QNO-6072R1 use?

It uses a 3.2–10mm 3.1x manual varifocal lens. The approximate horizontal field of view ranges from 109 degrees at the wide setting to 33.2 degrees at the tele setting. Because adjustment is manual, installers should set and focus the lens during commissioning rather than expecting remote optical zoom control.

Does it record to a microSD card?

Yes. The camera includes one microSD/SDHC/SDXC slot supporting up to 128GB. Edge storage can be useful for events or resilience, but the project should define whether the card is the primary recorder, a backup layer or an event buffer. For longer retention, an NVR or VMS is often more appropriate.

Does the QNO-6072R1 have audio?

No. Hanwha identifies the QNO-6072R1 as a no-audio model. If the project requires a built-in microphone, line input, two-way audio or speaker support, confirm a different camera model rather than assuming an external accessory can provide every required audio function.

Can it work with third-party NVRs?

The camera supports ONVIF profiles and common IP video codecs, which can help with third-party integration. Compatibility should still be verified with the specific NVR or VMS, including live video, recording, motion events, analytics, time sync and firmware support. ONVIF does not guarantee that every vendor-specific feature will work identically.

Is the QNO-6072R1 SIRA approved for Dubai?

The model appears in SIRA’s published approved-camera list under approval number SIRA/2023/7/07277. Because regulatory lists and project requirements can change, buyers should verify current approval status and the complete compliance requirements for the specific Dubai site before procurement or installation.

What should I send FourTeck for an accurate quote?

Send the required quantity, site location, indoor/outdoor split, approximate viewing distances, mounting heights, preferred recorder or VMS, retention days, existing network details and whether you need supply only or a wider CCTV deployment. This helps the sales and technical team discuss the right model, accessories, storage and switching rather than quoting the camera body alone.

Need help specifying the Hanwha QNO-6072R1?

Share your Dubai or regional project details with FourTeck. We can discuss the camera quantity, lens fit, recorder compatibility, storage target, PoE switching, outdoor mounting and current commercial availability for your requirement.

Contact FourTeck Sales