Hanwha SCO-6025R Dubai
The Hanwha Vision SCO-6025R is a Full HD analog IR bullet camera for businesses that want to keep or extend coax-based surveillance while gaining 1920 × 1080 video, a fixed 4mm viewing angle, integrated infrared illumination and outdoor-ready IP66 protection. It is especially relevant where an existing analog-HD or compatible coaxial recording environment is already in place and a straightforward fixed-view bullet camera is required.

Quick Product Summary
1920 × 1080 Full HD
4mm fixed lens
IR up to 30m
IP66 enclosure
12V DC, max. 5.4W
Up to 500m with specified 5C2V cable
This camera is intended for buyers who specifically need an analog HD bullet model rather than a network/IP camera. Before replacing an existing camera, confirm the recorder input format, channel resolution support, coax condition, power availability and whether the existing installation uses compatible AHD signalling. Fourteck can help review those points before a purchase is finalised.
Product Overview and Buyer Fit
The SCO-6025R is a compact outdoor bullet camera from Hanwha Vision’s analog surveillance range. Its core value is practical rather than complex: Full HD imaging, infrared night viewing, a fixed lens and long-distance video transmission over coax make it suitable for many replacement and extension projects where pulling new Ethernet cabling is unnecessary or undesirable. The camera uses a 1/2.8-inch CMOS imaging device and records up to 1920 × 1080 resolution through a compatible recorder.
A 4mm fixed lens provides a horizontal field of view of approximately 87.6 degrees, with vertical and diagonal fields of approximately 46.4 and 104.5 degrees respectively. That fixed view is useful when the required scene is already understood: entrances, corridors viewed from outside, perimeter approaches, small loading areas, service doors, gates and other locations where installers do not need a varifocal adjustment. If a site needs tighter identification at distance or flexible framing, a varifocal model should be considered instead.
For low-light operation the camera switches between day and night operation using an infrared cut filter mechanism. Hanwha specifies 0.11 lux in colour at F1.6 and 1/30 sec, and 0 lux in black-and-white when the IR LEDs are active. The stated infrared viewable distance is 30 metres. Real usable identification distance will still depend on mounting height, scene reflectivity, weather, lens angle and the amount of ambient light.
Key Features and Business Benefits
Full HD over coax
1920 × 1080 imaging can modernise compatible analog CCTV channels without necessarily replacing the existing coaxial pathway.
30m integrated IR
Built-in infrared supports after-hours monitoring without requiring a separate illuminator for many ordinary perimeter and entrance scenes.
Fixed 4mm lens
A fixed lens simplifies deployment in predictable scenes and avoids the need for field zoom adjustment after the required angle has been confirmed.
Image processing
BLC, HLC, DWDR and SSNR IV help manage challenging lighting, glare and image noise within the limits of an analog camera platform.
Outdoor housing
IP66 protection supports outdoor deployment where equipment may encounter dust and water exposure, subject to correct installation and sealing.
Long coax reach
Hanwha specifies video transmission up to 500 metres using 5C2V coaxial cable, giving integrators useful flexibility on suitable legacy infrastructure.
Verified Technical Specifications
| Specification | Hanwha SCO-6025R |
|---|---|
| Camera type | 2MP analog IR bullet camera |
| Imaging device | 1/2.8-inch CMOS |
| Maximum resolution | 1920 × 1080 |
| Minimum illumination | Colour: 0.11 lux at F1.6, 1/30 sec; B/W: 0 lux with IR LED on |
| Lens | 4mm fixed |
| Field of view | H 87.6° / V 46.4° / D 104.5° |
| IR viewable distance | Up to 30m |
| Day & Night | Auto, ICR |
| Backlight processing | BLC, HLC, DWDR |
| Noise reduction | SSNR IV |
| Motion detection | Supported |
| Privacy masking | 8 zones |
| Protocol | ACP (AHD Coax Protocol); CVBS Pelco-C (Coaxitron) |
| Operating temperature | -30°C to +55°C, 0–90% RH; startup above -10°C |
| Ingress protection | IP66 |
| Power | DC 12V / 0.45A, max. 5.4W |
| Dimensions / weight | Ø58.6 × 165.2mm without sunshield; 279g |
| Video transmission | Up to 500m over specified 5C2V coaxial cable |
Compatibility, Configuration and Deployment Guidance
The SCO-6025R is not an IP camera and does not connect directly to a PoE switch as a network camera would. It is intended for compatible analog-HD/coax recording environments. Before ordering, verify the DVR or hybrid recorder model, the supported analog standard and resolution, available channel type, existing cable quality and whether the power supply can provide stable 12V DC at the camera location. A physically compatible BNC connection alone is not enough to guarantee correct video operation.
When upgrading an older analogue camera, evaluate the complete signal path. Damaged connectors, poorly terminated coax, unsuitable splitters, weak power supplies or long cable routes can reduce reliability. Hanwha’s published transmission figure of up to 500m assumes specified 5C2V coaxial cable; real installations should be assessed for cable condition, routing and interference. Outdoor mounting should also use suitable junction boxes, protected connectors and weather-conscious cable entry so that the camera’s IP66 housing is not undermined by the installation method.
The camera has no software licence requirement of the kind associated with many IP video management platforms. However, the recorder, remote-viewing application or third-party VMS may have its own requirements. If remote viewing, central monitoring or integration with access control is important, confirm those functions at the recorder or platform level rather than assuming they are camera features.
Ideal Customers and Use Cases
The Hanwha SCO-6025R is a practical fit for offices, warehouses, shops, workshops, schools, clinics, villas, small commercial buildings and industrial support areas that already use compatible coaxial CCTV. Typical positions include building entrances, boundary walls, loading-bay approaches, external doors, service lanes, parking access points and covered perimeter areas where a fixed 4mm lens provides the required scene.
It is particularly relevant for phased upgrades. A business may have serviceable coaxial cabling and a compatible DVR but older low-resolution cameras. Replacing selected cameras with 1080p models can improve useful image detail without turning the entire project into an IP-network migration. Conversely, a new greenfield surveillance project may be better served by modern IP cameras if analytics, PoE, higher resolutions, cybersecurity controls and flexible VMS integration are priorities. Fourteck can compare the practical cost and deployment impact of keeping analog infrastructure versus moving to IP.
What to Confirm Before Ordering
- Recorder model and whether the selected channel supports the camera’s analog HD output and 1080p resolution.
- Whether a fixed 4mm lens and approximately 87.6° horizontal field of view match the target scene.
- Existing coax type, length, connectors and cable condition, especially on long legacy runs.
- Stable 12V DC power availability and suitable power-distribution design.
- Outdoor mounting accessories, junction-box requirements and protected cable entry.
- Required identification distance at night rather than relying only on the stated 30m IR illumination distance.
- Current product availability, commercial pricing, warranty route and lead time before issuing a purchase order.
Comparison and Related-Model Guidance
Choose the SCO-6025R when you want a fixed-lens outdoor bullet camera on compatible analog infrastructure. If you need an indoor dome with the same basic 2MP/fixed-lens concept, Hanwha’s SCD-6025R is the closer form-factor alternative, with a shorter published 20m IR range and no IP66 claim in the cited portfolio. If lens flexibility is important, the SCO-6085R uses a 3.2–10mm manual varifocal lens and can provide tighter framing. If vandal resistance is important, a vandal-dome model such as the SCV-6085R may be more appropriate because the portfolio identifies IP66 and IK10 protection for that model. Final selection should be based on scene geometry, mounting environment and recorder compatibility.
Hanwha SCO-6025R Dubai
Dubai buyers searching for the Hanwha SCO-6025R commonly need more than a camera part number. The practical questions are whether the model will work with an existing DVR, whether old coaxial cabling can be retained, what field of view a 4mm lens will provide, whether the infrared range is suitable for the actual site and what accessories are needed for outdoor mounting. The SCO-6025R is particularly relevant for Dubai offices, warehouses, retail units, workshops, villas and commercial buildings where existing analog CCTV infrastructure is still serviceable and a Full HD replacement camera is preferred over a complete network migration.
For Dubai installations, outdoor conditions deserve attention. The camera carries an IP66 rating and Hanwha specifies operation up to +55°C, but a reliable installation still depends on correct placement, cable protection, power stability and weather-resistant termination. Mounting directly into harsh sun can also affect the scene and enclosure temperature, so the installer should consider orientation, shade, reflective surfaces and nighttime IR bounce. In dusty industrial areas, planned lens and housing cleaning helps preserve useful image quality over time.
Commercial buyers in Dubai should also confirm whether the intended recorder accepts the camera’s signal mode and 1080p resolution. Many sites contain mixed generations of DVR equipment, and assumptions based only on BNC connectors can lead to compatibility problems. If the purpose is to replace one failed camera, provide the recorder model and a photo or description of the existing camera connection. If the requirement is a multi-camera upgrade, share the camera count, approximate cable lengths, site type, viewing objectives and expected recording period so the entire system can be reviewed together.
Fourteck’s Dubai CCTV installation guidance covers camera selection, cabling, recorder planning, storage and deployment. For the SCO-6025R, Fourteck can assist with product-fit review and quotation based on the actual requirement. Price, stock, delivery timing and warranty route should be confirmed at the time of enquiry because these details can change.
Hanwha SCO-6025R UAE
Across the UAE, the Hanwha SCO-6025R can be considered for branch offices, warehouses, schools, workshops, retail locations and mixed commercial sites that need a straightforward 2MP analog bullet camera. Multi-emirate organisations often face a different challenge from a single-site Dubai deployment: they need consistency across recorders, camera models, replacement spares and maintenance practices. Before standardising on the SCO-6025R, the technical team should document the DVR platforms currently in use at each site, supported channel types, power distribution and the condition of legacy coaxial runs.
The fixed 4mm lens is useful when the camera position and viewing requirement are predictable. It provides a relatively broad scene for entry approaches, external doors and moderate-distance overview positions. Where one branch needs a wider view and another needs close identification at a gate, forcing the same fixed lens everywhere may not be sensible. A combination of fixed and varifocal cameras can create a better result while retaining a consistent recording platform.
UAE buyers should treat night performance as a site-design question, not only a specification. Hanwha states a 30m IR viewable distance, but reflective walls, dust, moisture, vehicle headlights and the angle of the camera can affect usable footage. The 0 lux specification applies when infrared is active; facial or plate identification at distance still depends on scene conditions. For critical entrances, test the intended mounting position or choose a camera/lens combination designed for the exact target.
Fourteck provides wider UAE security guidance through its CCTV and access control systems resource and can help buyers compare analog retention with an IP migration. For procurement, share the site emirate, quantity, recorder model, mounting conditions and whether installation is required. Fourteck can then help clarify compatibility and current commercial details without assuming fixed stock or pricing.
Hanwha SCO-6025R Kenya
Kenya buyers evaluating the Hanwha SCO-6025R often include businesses upgrading existing analogue surveillance rather than rebuilding an entire CCTV system. Offices, schools, retail outlets, warehouses, workshops, hospitality sites and gated properties may already have coaxial cabling in place. In that context, a 2MP analog HD camera can be attractive when the recorder is compatible and the cable routes remain in good condition. The first step is therefore to identify the DVR model, channel capability and cable type before confirming camera quantities.
The SCO-6025R’s 4mm fixed lens is suited to defined viewing positions such as entrances, external walkways, storeroom approaches and perimeter lanes. For larger compounds or long gates, a fixed lens may not provide enough subject detail at the required distance. Buyers should map the viewing objective for each camera: general observation, person recognition, incident review or a tighter identification task. That simple distinction helps avoid using the same camera everywhere merely because the model is available.
Power quality and surge protection also deserve attention in Kenyan projects. The camera requires 12V DC and draws up to 5.4W, so centralised power supplies, local adapters, UPS support and cable voltage drop should be considered as part of the design. For outdoor positions, IP66 protection is valuable, but installers must still protect connections, use appropriate junction enclosures and keep water away from terminations. Long coaxial runs should be checked rather than assumed serviceable simply because an old camera produced a picture.
For Kenya enquiries, use Fourteck Kenya to discuss camera quantity, existing recorder details, site type, installation requirements and commercial availability. Where an organisation operates multiple branches, it is useful to standardise naming, recording retention and replacement policy across sites. Current stock, price, delivery method and warranty route should be confirmed specifically for the order rather than inferred from another market.
Hanwha SCO-6025R Kuwait
For Kuwait projects, the Hanwha SCO-6025R is most relevant where a business wants Full HD analog coverage using compatible coax-based infrastructure. Commercial buildings, retail stores, warehouses, service workshops and property compounds can have older CCTV cabling that remains usable. Replacing selected cameras instead of rewiring every location may reduce disruption, but compatibility must be verified with the DVR. Confirm supported analog formats, 1080p channel capability, connector condition and whether the recorder can expose camera controls needed for the project.
Environmental design is important for outdoor cameras in Kuwait. Hanwha lists an operating temperature up to +55°C and an IP66 enclosure for the SCO-6025R. These are useful specifications, but direct solar load, dusty conditions and enclosure placement still influence real-world reliability. Installers should avoid poorly ventilated power-supply boxes, protect BNC and DC connections, provide suitable cable glands and consider maintenance access so lenses can be cleaned without difficult or unsafe work.
The 30m published IR viewable distance makes the camera useful for many entrances, external walls and moderate-range approaches. However, customers should not equate IR reach with guaranteed identification at 30m. At night, subject size, motion, angle and reflected infrared light influence detail. If the security objective is a narrow gate, vehicle entry or long corridor, a varifocal camera may provide better control over framing. The fixed 4mm lens is strongest when the scene is already known and does not require optical adjustment.
Kuwait buyers can contact Fourteck Kuwait with the recorder model, camera count, cable distances and site conditions. This allows the requirement to be assessed as a system rather than as an isolated camera purchase. Ask for current availability, project pricing, warranty terms and delivery options at the quotation stage because these details are time-sensitive and should not be assumed.
Hanwha SCO-6025R Ghana
In Ghana, organisations considering the Hanwha SCO-6025R may be upgrading retail, education, office, warehouse, hospitality or industrial CCTV where coaxial cable is already installed. The camera’s 2MP Full HD resolution can provide a meaningful improvement over older standard-definition cameras when paired with a compatible analog-HD recorder. Before procurement, the most important technical check is the existing DVR platform. Different recorder generations and analog technologies are not automatically interchangeable, even when they share familiar coax connectors.
The fixed 4mm lens makes planning straightforward when a camera position covers a known entrance, corridor, doorway, loading area or boundary approach. It is less appropriate when one camera must alternate between broad overview and narrow identification. For those positions, a varifocal lens may be preferable. Buyers should review sample field-of-view requirements using the published 87.6-degree horizontal angle and actual mounting distance rather than selecting purely by megapixel count.
Ghana deployments should also account for power stability and environmental exposure. The SCO-6025R requires 12V DC and consumes up to 5.4W. A reliable CCTV design may include regulated power distribution and UPS backup depending on the site. The IP66 housing supports outdoor installation, but cable joints, power connections and junction points still need suitable protection. In humid or coastal environments, careful connector sealing and periodic inspection can be important for long-term performance.
For procurement and project discussions, Fourteck Ghana can be used to share the quantity, site location, existing recorder details, intended viewing areas and installation scope. Multi-site customers should also define recording retention, user access and replacement standards. Product availability, exact commercial price, warranty route and shipping arrangement should be confirmed for the specific Ghana order before approval.
Hanwha SCO-6025R Uganda
Uganda businesses looking for the Hanwha SCO-6025R may be planning a replacement camera, an expansion of an existing DVR system or a staged CCTV refresh. The camera is best understood as a 2MP analog HD bullet model, not as an IP camera. That distinction matters because it uses coaxial video infrastructure and separate 12V DC power rather than Ethernet/PoE. A buyer should therefore confirm the DVR model and supported analog video format before assuming the camera will work on an existing channel.
The model’s 4mm lens provides a fixed view suitable for entrances, exterior doors, storage approaches, parking access lanes and other positions where the scene does not require optical zoom. For schools, warehouses and compounds, camera positions should be planned according to the security question each view must answer. A broad overview may show movement but not enough facial detail; a tighter view may capture identification but miss surrounding context. Using the correct lens for each position is more important than installing identical cameras throughout a property.
At night, integrated IR provides a published range up to 30m. This is useful for general after-hours monitoring, but site factors such as walls close to the lens, insects, rain, reflective surfaces and lighting can affect image quality. Outdoor deployment should use protected connections and sound mounting practices so the IP66 rating of the housing is complemented by equally careful cable termination. Where mains stability is a concern, the design should consider regulated 12V supply and appropriate backup power.
Uganda customers can use Fourteck Uganda to discuss compatibility, quantity and project requirements. For a fast technical review, provide the existing DVR brand and model, camera count, approximate cable distances and the main areas to be monitored. Current stock position, pricing, shipment timing and warranty arrangements should be confirmed at the quotation stage.
Hanwha SCO-6025R Nigeria
Nigeria buyers assessing the Hanwha SCO-6025R often need a durable outdoor camera that can work with an established coax-based surveillance system. Banks, offices, stores, warehouses, schools, estates and industrial facilities can have extensive cable runs that would be costly or disruptive to replace solely to change camera technology. Where the recorder supports the required analog HD signal, the SCO-6025R provides 1080p imaging while retaining the practical simplicity of a fixed-lens coax camera.
Long cable runs should be evaluated carefully. Hanwha states transmission up to 500m with specified 5C2V coaxial cable, but existing sites may contain mixed cable types, joins, degraded shielding or improvised connectors. A technician should inspect or test the path, especially where older cameras show interference. Power distribution is equally important because the SCO-6025R needs 12V DC. Voltage drop and unstable power can cause faults that appear to be camera problems, so regulated supplies and suitable backup should be part of the system plan.
The model’s 30m IR and IP66 enclosure support many outdoor monitoring positions, but camera placement should be designed for the target rather than simply pointing at the largest possible area. The 4mm fixed lens is suitable for general-purpose views; if vehicle gates, long driveways or high-value inspection points need more precise framing, a varifocal alternative may produce better evidence. For night scenes, test whether nearby walls or reflective surfaces cause excessive IR return.
For Nigeria enquiries, use Fourteck Nigeria to provide recorder details, site type, quantities, installation needs and desired monitoring outcomes. Organisations with multiple branches should consider standard camera naming, retention policies and spare strategy. Pricing, availability, delivery terms and warranty handling vary with the order and should be confirmed in the current quotation.
Hanwha SCO-6025R Seychelles
For Seychelles businesses and properties, the Hanwha SCO-6025R may suit outdoor and semi-outdoor CCTV positions where a compatible coax-based recorder is already used. Hotels, guest properties, offices, retail locations, warehouses and service facilities may prefer to reuse existing cable routes rather than redesign the complete system. The camera delivers 2MP Full HD video through an analog surveillance architecture, so the DVR’s supported signal and resolution must be confirmed before purchase.
Coastal and humid environments require careful installation practice even when a camera carries an IP66 rating. The camera housing can resist dust and water ingress under its rated conditions, but exposed connectors, junction boxes and cable entry points remain part of the complete installation. Mounting hardware should be appropriate for the environment, connections should be protected, and periodic inspection should look for corrosion or moisture at external terminations. These practical steps can matter as much as the camera specification for reliable long-term operation.
The SCO-6025R uses a 4mm fixed lens, making it suitable for predetermined views such as access paths, doors, reception approaches, loading points and selected perimeter positions. The stated 30m IR viewable distance can support night monitoring, but reflected infrared from nearby walls, vegetation or glossy surfaces can reduce clarity. A site with long open approaches may need a varifocal or different camera type if the security objective is identification rather than general observation.
Seychelles enquiries can be routed through Fourteck Africa. Share the site type, camera quantity, recorder model, existing cable details and whether installation support or supply-only procurement is required. This information helps determine whether the SCO-6025R is technically suitable or whether another camera type is a better choice. Availability, pricing, warranty and shipment arrangements should be confirmed for the specific project before placing an order.
Related Fourteck CCTV and Infrastructure Resources
Fourteck’s currently verified site links provide broader project guidance rather than seven separate indexed Hanwha product pages. Use these resources when planning the SCO-6025R as part of a complete security environment:
CCTV Installation Dubai
Planning guidance covering camera types, recorder sizing, cabling, storage, remote viewing and deployment for offices, warehouses, retail, villas and other sites.
CCTV & Access Control UAE
Useful for integrated security projects where camera surveillance is planned alongside door access, user permissions and broader site protection.
Networking, Firewalls & Switches
Relevant when an analog camera project will coexist with IP cameras, remote viewing, NVRs, VMS servers or segmented security networks.
Regional Fourteck Resources
For UAE requirements, visit Fourteck or Fourteck UAE. Regional buyers can use Fourteck Kenya, Fourteck Kuwait, Fourteck Ghana, Fourteck Uganda, Fourteck Nigeria and Fourteck Africa for Seychelles and wider African enquiries. These links provide the appropriate route to discuss current commercial details and deployment needs without assuming local stock or fixed delivery times.
Why Contact Fourteck
A CCTV camera should be selected as part of a recording and cabling system, not in isolation. Fourteck can help review the recorder, camera count, scene requirements, storage expectations, cabling, power and installation scope before a quotation is finalised. This is useful for buyers trying to decide whether to retain analog infrastructure, replace a failed camera, upgrade selected channels or migrate to IP surveillance.
For the SCO-6025R specifically, useful information to share includes the existing DVR brand and model, a photo of the current camera connection if available, approximate cable length, mounting location, desired viewing area and whether night identification is important. With those details, the project can be assessed more accurately and unnecessary compatibility risk can be reduced.
Hanwha SCO-6025R FAQ
Is the SCO-6025R an IP camera?
No. The Hanwha SCO-6025R is a 2MP analog HD IR bullet camera. It is designed for compatible coaxial CCTV systems and uses 12V DC power. It should not be treated as a PoE network camera. Recorder compatibility must be confirmed before ordering because different DVRs support different analog video standards and resolutions.
What resolution does the SCO-6025R support?
Hanwha specifies Full HD 1920 × 1080 resolution from a 1/2.8-inch CMOS imaging device. The recorder must also support the appropriate 1080p analog input mode to receive and record the camera correctly.
How far can the SCO-6025R see at night?
The published IR viewable distance is up to 30 metres. This describes infrared illumination reach rather than guaranteed identification distance. Mounting height, target size, movement, rain, dust, reflective surfaces and ambient lighting all affect the amount of usable detail in night footage.
What lens does the SCO-6025R use?
It has a built-in 4mm fixed lens. Hanwha lists an approximate field of view of 87.6° horizontal, 46.4° vertical and 104.5° diagonal. Because the lens is fixed, confirm the camera position and scene width before purchase.
Is the SCO-6025R suitable for outdoor installation?
Yes, the camera is IP66 rated and Hanwha specifies an operating temperature range from -30°C to +55°C, with startup above -10°C. Correct outdoor installation still requires protected connectors, suitable junction boxes and careful cable entry.
How is the SCO-6025R powered?
The camera uses 12V DC power and is rated at 0.45A, with maximum power consumption of 5.4W. It does not use PoE. Power-supply sizing and voltage drop should be reviewed when cameras are installed far from the power source.
Can I reuse existing coaxial cable?
Potentially, yes. Hanwha specifies video transmission up to 500m using 5C2V coaxial cable. Existing cable should be checked for type, condition, joints, shielding and connector quality. Reusing poor cable can introduce noise or intermittent video even when the camera and DVR are compatible.
Does it support motion detection and privacy masking?
Yes. Hanwha lists motion detection support and eight privacy masking zones for the SCO-6025R. Exact control and recording behaviour can also depend on the connected recorder and how the system is configured.
What should I send Fourteck for a compatibility check?
Provide the DVR manufacturer and model, number of required cameras, existing cable type if known, approximate cable distances, mounting locations and the viewing objective for each position. Photos of the recorder label and existing camera connections can also make the review easier.
How do I get the Hanwha SCO-6025R price in Dubai?
Request a current quotation from Fourteck with the required quantity and whether supply only or installation is needed. Price, stock, delivery timing and warranty handling should be confirmed at the time of purchase because those commercial details can change.
Need Help Confirming the SCO-6025R for Your CCTV System?
Share your recorder model, camera quantity, installation location and existing cabling details. Fourteck can help determine whether the Hanwha SCO-6025R fits the project and can provide current commercial information for your market.





Reviews
There are no reviews yet.